Question about 2001 Isuzu Rodeo

1 Answer

How do you replace the starter on a 2001 Isuzu Rodeo 4cyl 2WD?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 642 Answers

Remove the battery earth cable. Engage parking brake and chock the wheels. The starter is on the lower rear left hand side of the engine. Remove the starter supply cable by undoing the 13mm nut on the rear of the solenoid. Unclip the start wire on the side of the solenoid by squeezing and then pulling the connector plug. Undo the mounting bolt on the top of the starter first. and remove. Then the bottom one. Doing it this way round will make it easier to undo the bolts by hand once loosened.
Pull the starter to the front of the car and remove.

Posted on Aug 26, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to I remove starter from 2001 2wd 2.0 Isuzu Rodeo


Buy a manual. Read it and it will describe how to remove starter.

Oct 10, 2014 | Cars & Trucks

1 Answer

Cylinder head bolt tightening sequence for isuzu rodeo 1998


1998 Isuzu Truck Rodeo 2WD 2.2L MFI DOHC 4cyl

The Head Bolt Torque

Torque sequence ----------------- front ' 7 3 1 5 9 ' of ' ' engine ' 8 4 2 6 10 ' ----------------- Step 1: torque bolts in sequence to 18 Ft/Lbs Step 2: turn bolts in sequence an additional 90-degrees Step 3: turn bolts in sequence an additional 90-degrees Step 4: turn bolts in sequence an additional 90-degrees recheck final torque in sequence

1998 Isuzu Truck Rodeo 2WD 3.2L MFI DOHC 6cyl

The Head Bolt Torque

Torque sequence -------------- front ' 6 1 3 7 ' of ' ' engine ' 5 2 4 8 ' -------------- Step 1: torque to 20 Ft/Lbs Step 2: torque to 47 Ft/Lbs recheck final torque in sequence

Jan 15, 2013 | 1990 Isuzu Spacecab

1 Answer

How remove the starter on a 2004 isuzu rodeo 2wd 3.5L v6


where is the starter located at on my 2004 izuzu rodeo

Dec 03, 2010 | 2004 Isuzu Rodeo

1 Answer

I have a 1999 isuzu rodeo 2WD 3.2L V6. What are the steps in replacing my starter. My car is stranded and i need to try to replace it myself?


The repair manual book says first disconnect the battery , then lift the car to have more space to work on it make sure that is secure if you liftit ,remove the nut to Starter ,also nut to solenoid cable ,or if you think it is easier take off starter first and then after remove nuts to starter and solenoid ,then you ready to install you new or rebuilt starter ,,good luck

Nov 26, 2010 | 1999 Isuzu Rodeo

1 Answer

2001 Isuzu Rodeo 4 cyl 2.2L 2WD that is overheating


check the electric fan conector plug some times is rusti scratchet whit a sharp scruwdriver remove the rusti or dirt on it this happens many times and step two check the relay and thats it (this is the first step a mecanic to search)

Feb 07, 2010 | 2001 Isuzu Rodeo

2 Answers

Won't crank, will push start and runs fine.


make shure your baterie haves abaut 13 amps
then check your starter solenoid make shure that curent is geting there wen you turn the key

Jul 13, 2009 | 2002 Isuzu Rodeo

2 Answers

Replaced starter when battery was connected it started sparking and smoking.


Sounds like he may have pinched a wire or hooked it up backwards or has the power wire touching the starter housing.

Jun 02, 2009 | 1999 Isuzu Rodeo

Not finding what you are looking for?
2001 Isuzu Rodeo Logo

Related Topics:

322 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...