Question about 1998 Ford Explorer

1 Answer

1997 Ford ExploreR with the following codes P1762, P0732 and P0735

Posted by on

  • Anonymous Mar 19, 2014

    Scanner show me code P0732 and P0734

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 149 Answers

P0732
incorrect gear ratio,second gear

p0735
incorrect gear ratio, fifth gear

p1762
are you sure this is the code number it is a manufacturer-specific code. and i'm not seeing it in my bood check to see if you have the right numbers on it.

Posted on Aug 21, 2010

Testimonial: "Was correct on his diagnostics."

  • 3 more comments 
  • porfirio56 Aug 21, 2010

    The correct code is P1762

  • pam Aug 22, 2010

    i`m not seeing it in my book sorry. i will do some more looking and let you know.

  • pam Aug 22, 2010

    p1762



    overdrive band failed off

    hope this helps

  • pam Aug 25, 2010

    just wanted to say i`m a girl not a him.

  • trans man1 Jul 29, 2011

    hi i an an automatic trans builder my name is charles the problem is that trans is a 5R55W/S it has 2 servo pistions on the passenger side of trans the pins on the servos egg shape the holes in the case and leak fluid pressure into the trans insted of holding the band for 2nd &5th gear. the fix is to bore out the case and install bushings to restore the roundness of the bore and stop the pressure loss. u can check this web site the tools are very costly and should be done by a TRANSMISSION TECH servobore.com the only other fix is to buy a NEW case not used becouse ALL of them do the same thing

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hey I have a ford explorer 2006 and it keep saying trans code p0735 what that means ?


code p0735 refers to gear 5 --incorrect ratio.===causes --wiring---TR sensor / switch---shift solenoids--transmission mechanical fault. I would be replacing the TR sensor/ switch first. IF it looks like a transmission mechanical fault Have pressure test done first and check the bands and clutch adjustments before considering a replacement/ over haul. I feel confident it is a electronic fault

Jan 23, 2014 | Cars & Trucks

1 Answer

2003 mitsubishi outlander rough idle won't stay on and wont run with load


p0134 - Bad O2 Sensor or faulty sensor wiring

p0132 - Bad O2 sensor (Bank 1 Sensor 1)

p0401 - Exhaust Gas Recirculation insufficient

p0113 - Defective intake air temperature sensor/ clogged air filter/ faulty Mass Air Flow (MAF) sensor.

p0101 - Vacuum leak/ defective MAF sensor/ damaged intake manifold gasket

p0107 - Faulty Barometric Pressure sensor or its wiring system

p0758 - Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid B wiring problem or its valve

p0753 - Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid A wiring problem or its valve

p0736 - Transmission problem/ Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid wiring problem or its valve/ Transmission hydraulic control circuit

p0735 - Transmission problem/ Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid wiring problem or its valve/ Transmission hydraulic control circuit

p0732 - Transmission problem/ Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid wiring problem or its valve/ Transmission hydraulic control circuit

p0720 - Damaged speed sensor/ its harness/ connector

Jun 12, 2013 | 2003 Mitsubishi Outlander

1 Answer

I have error codes p0735, 0732 and0775 has possible worn o/d band


I would say you are looking at a transmission rebuild here.

Aug 29, 2012 | 2002 Ford Explorer

1 Answer

HI i Scanned my Ford Explorer to a computer and i got codes P0732 and P0735 can i get a little info about the codes and how to fix the problem


P0735 FORD - Automatic Transmission Incorrect Fifth Gear Ratio Incorrect Possible causes - Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Transmission mechanical problems
- Transmission hydraulic control circuit

P0732 FORD - Automatic Transmission Incorrect Second Gear Ratio Incorrect All - causes would be the same as above with ALSO Probable bad valve body - and or pressure solenoids. Probable bad clutch band. If the fluid is ok and if you have tried changing the fluid and filter to no aval. Is it time to think about a transmission repair at a local transmission shop. Sorry.

Sep 12, 2011 | Ford Explorer Cars & Trucks

1 Answer

Transmission code


p1762 is a specific fault of overdrive band off

Aug 24, 2008 | 1997 Ford Explorer AWD

1 Answer

Transmission code


Here is the TSB from Ford:


Here it is... TSB 03-22-10...

FORD: 1995-2001 EXPLORER
1995-2002 RANGER
1996-1997 AEROSTAR
2000-2002 EXPLORER SPORT
2001-2002 EXPLORER SPORT TRAC
MERCURY: 1997-2001 MOUNTAINEER


This article supersedes TSB's 03-11-9, 02-13-8 and 02-08-2 to update the model coverage.

ISSUE:
Some vehicles built prior to 12/1/2001 may exhibit the following shift and engagement conditions:

No 2nd Gear
No 3rd Gear
No Engine Braking In Manual 1st.
Out of specification pressures controlled by the transmission main control valve body separator plate may be the cause.

ACTION:
Verify the condition, the main control valve body separator plate may need to be updated to the latest level. Refer to the following Service Procedure for details.

SERVICE PROCEDURE

CAUTION: A NEW SEPARATOR 7Z490 MUST BE USED WHEN INSTALLING THE SPECIAL SERVICE KIT 7M203 OR ADDITIONAL TRANSMISSION DAMAGE MAY OCCUR. REFER TO THE PARTS APPLICATION CHART IN THIS ARTICLE FOR CORRECT SEPARATOR PLATE PART LISTING.



NOTE: THIS ARTICLE DOES NOT APPLY TO ANY OTHER CONDITIONS OR COMPONENTS THAT MAY CAUSE SIMILAR SYMPTOMS AND IS ONLY WRITTEN TO COVER THESE SPECIFIC CONDITIONS.



NOTE: AN IN-LINE SERVICE FILTER IS NOT REQUIRED TO BE ADDED OR REPLACED FOR THIS TSB.



Verify that one or more of the following conditions exist.
Low Line Pressure While In Drive At WOT
No 2nd And/Or No 3rd Gear
No Engine Braking In Manual 1st
DTC P0732, P0733 Or P1762
Install Kit (3L5Z-7M203-JA) to update the main control valve body assembly, refer to the installation procedures found in the kit.
Reinstall the main control by continuing to follow the installation steps listed in the Workshop Manual, in-vehicle service, main control valve body.
After completing the procedure, verify the condition has been corrected.
Clear all DTCs.

Part Application Chart
Vehicle Application Engineering Description Qty. New Service Part Use on Transmission Application 7000 -Reference Only-
95/96 Models ONLY
95/97 Models Separator Plate to Case Gasket 1 2L5Z-7C155-AA ALL
95/97 Models Separator Plate to Main Control Gasket 1 2L5Z-7D100-BA ALL
95/96 Models - ALL Plate - Valve Body Separator 1 F5TZ-7A008-CA 95GT-AA/BA/CA/DA/EA/FA/ GA;96GT-BA/CADB/EB/FA/ GA/HA/KA/MA/NA
97 Models ONLY
97 2.3L Ranger Plate - Valve Body Separator 1 F77Z-7A008-AB 97GT-GC
97 3.0L OHV Ranger/Aerostar Plate - Valve Body Separator 1 F77Z-7A008-AB 97GT-EC/FC/MC/NC/RE/SE
97 4.0L OHV Ranger/Aerostar Plate - Valve Body Separator 1 F77Z-7A008-CB 97GT-KE/LE
97 4.0L OHV Explorer/Mountaineer Plate - Valve Body Separator 1 F77Z-7A008-DB 97GT-KF/LF
97 4.0L SOHC Explorer/Mountaineer Plate - Valve Body Separator 1 F77Z-7A008-EB 97GT-AE/BE
1998-2001 Models ONLY
98/01 2.5L Ranger Plate - Valve Body Separator 1 1L5Z-7Z490-DA 98GT-GA; XL5P-CA
98/00 3.0L Ranger Plate - Valve Body Separator 1 1L5Z-7Z490-EA 98GT-EB/FB; XL5P-AA/BA
98/00 4.0L - EI Ranger Plate - Valve Body Separator 1 1L5Z-7Z490-FA 98GT-KB/LB; XL5P-DA/EA/FA
98/00 4.0L - EI Explorer Plate - Valve Body Separator 1 1L5Z-7Z490-GA 98GT-CB/DB; XL2P- EA/FA
98/00 4.0L - SOHC Plate - Valve Body Separator 1 1L5Z-7Z490-HA 98GT-AA/BA; XL2P- CA/DA
2001-2002 Models ONLY
2001/2002 2.3L Ranger Plate - Valve Body Separator 1 1L5Z-7Z490-AA 1L5P-CA
2001/2002 3.0L Ranger Plate - Valve Body Separator 1 1L5Z-7Z490-BA 1L5P-AA/BA
2001/2002 4.0L-SOHC - ALL Plate - Valve Body Separator 1 1L5Z-7Z490-CA 1L5P-DA/EA
ALL MODELS
1995-2002 ALL as Listed Above Valve Body Service Kit 1 3L5Z-7M203-JA ALL

May 27, 2008 | 1998 Ford Explorer

Not finding what you are looking for?
1998 Ford Explorer Logo

Related Topics:

2,215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...