Question about 1992 Chevrolet Camaro

1 Answer

I have to change my gas tank, my problem is the neck where you put gas in the car, can I cut it to let pass the tank down even if there's gas in it Thank's

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 3,640 Answers

No! the filler tube should come out of tank, it is held in with a rubber grommet. if filler tube is disconnected from the top, it may just come out ok.

Posted on Aug 21, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

How to siphon gas in 2001 ford windstar


usually there is a little flapper in the fill tube to prevent siphoning of fuel.

Jan 05, 2015 | 2001 Ford Windstar

1 Answer

How to install gasoline filler neck 1998 chevy silverado


First disconnect your battery, drain your fuel tank, then support your fuel tank with a jack, then take the 3 bolts out on your filler neck by your gas door, then take the gas tank plastic shield off, then loosen the gas tank straps, then make sure you drop the tank a little to be able to reach up and loosen the hoses on the fill neck and then remove the hoses. Then install the new fill neck.
Then reverse everything to put back together.
But since you have everything opened up, take the time to look over everything before you put it back together, replace anything badly rusted or broken, no sense to have to do this all again.
I would say if doing this on the ground with jacks and jack stands, with all hand tools, this should take you any where from.an hour or two, depending how badly rusted everything is, it's best to.spray all rusted nuts and bolts down the night before a couple of times. I use PB BLAST, which for me has worked great over the years.
Remember, since you are around.gas, NO SMOKING, WATCH FOR SPARKS, AND NO OPEN FLAMES, NO CUTTING TORCHES !
Hope I was able to help you out and the way I.explained the steps were good, if need more info, let.me.know.
This is an easy job, just a pain due to the rust and jacking the gas tank

May 11, 2014 | 1999 Chevrolet Silverado 1500

2 Answers

How to drain gas tank


Remove gas tank. Remove sending unit, drain fuel.

Aug 21, 2013 | 1991 Cadillac Eldorado

1 Answer

Whta can couse the gas pump to stop pumpin while pumping gas in my car


a. There is a Restriction in the Filler Neck of the Vehicle
b. VENT TUBE is twisted and not allowing the Air to escape as the Gas goes into the Tank.

This happen to one of my customers and could not figure it out. Then I said "Let ME SEE".... So I disconnected the Filler Neck off the vehicle and found that someone put a Plastic Bag into the Filler neck and jammed it all the way down to the Tank...

I removed the Partly Melted Bag, reinstalled the Filler Neck and worked perfect

Apr 06, 2013 | 2004 Chevrolet Impala

2 Answers

WHEN I POUR GAS IN TANK IT WILL NOT GO IN TANK IT IN UP ON GROUND HOW DO I FIX THAT GAS LINE GOES TO TANK


most fords i have had have this problem the small vent hose gets a hole in it and gas won't go down, need new filler tube. u will have to lower gas tank and remove screws from filler neck around cap to change out , easier if tank is empty.

Mar 15, 2011 | 1993 Ford Econoline

1 Answer

Every time i am putting gas in my car it would shut off or kick back gas. I have tried different pumps even try puttin gth egas in slow or not putting the nozzle in all the way and nothing helps


Sounds like you have something stuck in your gas tank maybe someone put something in your gas tank perhaps you might consider a good flash light and a pen open the cap insert the pen hold tight and put flash light in filler neck flap hole to see what kind of obstacle you have stuck in your filler nozzle neck if your unable to see anything you might consider taking the car to certified technician for service to you clogged gas filler neck.

Dec 28, 2010 | 2000 Hyundai Elantra

1 Answer

When I put gas in my truck it started cutting off.


This could be an old trick by a shop to sell you a new gas tank. If you've had it worked on recently, check up under the side for a pair of vice grips on the gas tank neck restricting it.

Jul 05, 2009 | Ford F-150 Cars & Trucks

1 Answer

I can't fill the tank. The nozzle keeps clicking off.


the fill vent is inside the fill tube . your fill is 2 inch and inside it is a 3/4 inch that your gas goes down it runs from the filler neck to the 3/4 mark inside the tank your vent is the area between the outside if the inside tube and the inside of the outside tube . and vents through the gas pump nozzle ... gm has a problem with there trucks where the inside fill tube gets kinked after a while and kicks off the pump . i have never seen anyone fix this problem and have it work for long . i have a 2003 chevy truck same problem have to fill real slow . pulled tank , checked all lines changed fill neck ( flapper door in fill neck bad ) .... put it back . same problem . good luck . i gave up

Mar 13, 2009 | 1984 Chevrolet S-10

1 Answer

1995 nissan altima fuel cut off


Your fuel filter could be stopped up, injectors could be stopped up or there may even be a fuse for fuel. May also be your fuel pump, which is generally in the fuel tank. If you turn your ignition on, don't crank it, see if you can hear a whining noise coming from the gas tank neck(where you put the gas in). Hopefully that is NOT your problem.

Nov 17, 2008 | 1993 Nissan Altima

Not finding what you are looking for?
1992 Chevrolet Camaro Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...