Question about 2003 Jeep Grand Cherokee

1 Answer

I am changing my front brakes ans cant get one of the cylinders push in. i have never worked on brakes with dual brake cylinders is there a trick to this?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,793 Answers

Clamp the hose and undo the bleed nipple.

Posted on Aug 21, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 4wd. Why aren't brakes working?


Does the brake pedal go to the floor? Or does it stay up, and is hard to push...? Did you bleed the master cylinder? Also, you will need to bleed all 4 wheels connection to the brake wheel cylinders...you must start with the rear, farthest from the master cylinder, then other rear, then front farthest from the master cylinder, then other front...the bleeding of each line is a must, since you switched the master cylinder.

Sep 14, 2015 | GMC Sierra 1500 Cars & Trucks

1 Answer

Bleeding 02 toyota sequoia


You have a helper pushing on the brake pedal when you open the bleeders? Is fluid coming out of the bleeders when you open them?

typically you will start at the right rear, then left rear, then right front, then left front. or work your way from the farthest bleeder to the nearest bleeder to the master cylinder. Make sure the reservoir does not go dry or you will have to start over.

It is possible that when you pushed the pedal to the floor the seals in the master when through some debris and where ruined.

Apr 11, 2013 | 2002 Toyota Sequoia

1 Answer

Have an 89 festiva changed 5 master cylinders and still cant bleed front driver and rear pass wheel and also changed distribution block 3 times. i cant bleed it rite from the front port of the master...


Section 06-06: Hydraulic Brake System 1992 Festiva Workshop Manual GENERAL SERVICE OPERATIONS Manual Bleeding
  1. Read Hydraulic System Bleeding General Information.
  1. Clean all dirt from the master cylinder filler cap.
  1. Fill the master cylinder with the specified brake fluid. During the bleeding operation do not allow the master cylinder to run dry.
  1. If the master cylinder is known or suspected to contain air it must be bled before the wheel cylinders or calipers. To bleed the master cylinder, loosen the front line fitting and have an assistant push the brake pedal slowly through its full travel. While the assistant holds the pedal, tighten the brake line fitting. After the line fitting is tightened, the assistant may release the brake pedal. Repeat this procedure on the rear brake line. Repeat the entire process several times to ensure all air has been removed from the master cylinder.
  1. Remove the bleeder screw cap from the appropriate rear wheel cylinder.
  1. Position a box end wrench on the bleeder fitting.
  1. Attach a rubber hose to the bleeder fitting. The hose has to fit snugly around the bleeder fitting.
  1. Submerge the free end of the hose in a container partially filled with brake fluid.
  1. Loosen the bleeder fitting approximately three quarters of a turn.
  1. Have an assistant push the brake pedal slowly through its full travel and hold it there.
  1. Close the bleeder fitting.
  1. Have the assistant release the brake pedal.
  1. Repeat Steps 9 through 12 until air bubbles cease to appear at the submerged end of the bleeder hose.
  1. When the fluid entering the bottle is completely free of bubbles, tighten the bleeder screw, remove the bleeder hose, and install the bleeder screw cap.
  1. Repeat Steps 5 through 14 at the appropriate diagonal front caliper.
  1. Check the master cylinder fluid level. If necessary fill it to the correct level with the specified brake fluid.
  1. Check pedal feel. If the pedal remains spongy, repeat the bleeding process or, if necessary, refer to Diagnosis and Testing in Section 06-00.

Jan 04, 2011 | 1991 Ford Festiva

1 Answer

I am replacing the front disc brakes on a 1999 escort


i shall help u by telling the procedure. first remove the brake cable from the caliper. now check for the dusts if any and re insert into the disc caliper now bleed the brake master cylinder. strongly kick the brake.keep it in pressed condition and pour in the brake oil. now release the brake pedal and push it for two times and then release.now the oil will be evenly distributed into your master cylinder. To be noted that connection goes directly from brakes master cylinder to the brake pedal. from the brake master cylinder the connection goes to the two wheels(front).check for any oil leakage.

Jan 31, 2010 | 1999 Ford Escort

1 Answer

Any info on changing a brake booster on a 1996 Sierra and also help trouble shooting a master cy. Thanxlinder


a defective master has just one common symptom, a soft sinking pedal.
Instructions Things You'll Need:
  • Nose pliers
  • Ratchet and socket
  • Ratchet extension
  • Slip joint pliers
  • Wrench
  • New cotter pin
    Removing the Old Brake Booster
  1. Step 1 Park your car in a safe place with enough room to work around the front and driver side of the vehicle.
  2. Step 2 Locate the booster push rod connected to the brake pedal.
  3. Step 3 Remove the cotter pin securing the booster push rod pin to the brake pedal using a pair of nose pliers.
  4. Step 4 Release the push rod pin from the brake pedal and slide the push rod off the brake pedal.
  5. Step 5 Unscrew the four mounting nuts off the brake booster studs using a ratchet, ratchet extension and socket. You should be able to see the four booster studs extending through the firewall, in front of the brake pedal.
  6. Step 6 Disconnect the vacuum hose from the brake booster, working from the engine compartment. Use a pair of slip joint pliers.
  7. Step 7 Remove the two nuts holding the brake master cylinder to the brake booster. Use a wrench or ratchet and socket.
  8. Step 8 Separate the brake master cylinder from the booster just enough to make room for booster removal.
  9. Step 9 Pull the brake booster off the firewall and remove it from the vehicle.
    Installing the New Brake Booster
  10. Step 1 Set the new booster in place by sliding the push rod and four mounting studs through the mounting holes on the firewall.
  11. Step 2 Slide the brake master cylinder flange over the two mounting studs on the brake booster.
  12. Step 3 Start the two brake master cylinder mounting nuts by hand to avoid damage to the threads.
  13. Step 4 Tighten the two brake master cylinder mounting nuts using a wrench or ratchet and socket.
  14. Step 5 Connect the vacuum hose to the brake booster.
  15. Step 6 Screw the four mounting nuts to the brake booster working from inside the vehicle. Start the nuts by hand to avoid damaging the threads.
  16. Step 7 Tighten the four mounting nuts using the ratchet, ratchet extension and socket.
  17. Step 8 Position the brake booster push rod over the brake pedal and slide the push rod pin.
  18. Step 9 Install a new cotter pin to secure the booster push rod to the brake pedal

Nov 20, 2009 | 1996 GMC Sierra

2 Answers

Only front brakes are stopping rear is not


The dual brake system is split front and rear, with the front wheel brakes comprising one circuit and the rear wheel brakes, the other circuit.

I suspect it's a bad mastercylinder

Oct 19, 2009 | 1999 Ford Explorer

1 Answer

Cant get brakes to bleed properly


Here's all the tricks for bleeding brakes that I've got:
1. keep the master cylinder FULL.. check it often. if you **** air into the lines, you're going to need to start all over... so keep it full.
2. Have a assistant pump the brake pedal and hold pressure- when you open the bleeder screws at the wheels, the pedal will drop. Make sure the assistant doesn't let off the pedal until you get that bleeder shut again. Then he can repressurize again (keep an eye on your fluid level).
3. Start at the farthest wheel. then work to the closest to the master cylinder.
4. Then refill the fluid as needed.
5. You may need to "center" the brake lite (dash indicator) you can do this by having the assistant hold pressure while you bleed the line at the master cylinder (quick and abrupt) you may have to do the front or the rear line (on the master cylinder).
Good luck...hope this aolves your issue..
k

Oct 14, 2009 | 2003 GMC Sierra 2500HD

3 Answers

!988 k1500 4x4 5.7l brakes


Bleed right rear,left rear, right front, left front in that order to be sure of good bleed but the brake booster makes it easy to push pedal. Make sure of no leaks from master cylinder. Otherwise brake hoses being soft will also hurt baking quickly.

Apr 15, 2009 | 1988 Chevrolet K1500

1 Answer

Changing the rear brake pads on 91 mu


Chalk the front wheels, car is on jackstands i hope, release the handbrake, use the old pad with a c- clamp to compress the pistion on the caliper, install new pads. may have to take the cap off the master cylinder, if none of this works, open the bleeder valve, and compress the piston, rebleed the caliper.

Feb 24, 2009 | 1995 Isuzu Rodeo

Not finding what you are looking for?
2003 Jeep Grand Cherokee Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...