Question about Chevrolet S 10

2 Answers

I have a 1995 chevy s-10 and the ecm ign fuse keeps blowing, I can put a new one in and it starts and then dies out and the fuse is blown again. What could that be anyone?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Same problem check everything found heater hose under the thermostat had small leak unplug alternator blow out water from plug too. seem to solve problem

Posted on Jan 22, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

90 Safari van 4.3 engine EMC fuse keeps blowing, found white wire
going to the injector grounded out, solved my problem.
hope this helps from bustedknuckles.........

Posted on Aug 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 camry fuse keep blown when i put in drive


well lets try a couple things to see if we can solve your issue. first off, do not start the car but turn the key to the ign. does the fuse blow? if no step on the brake. did the fuse blow? if no then put the gearshift from park to drive. did the fuse blow? did it blow? last of all look and see if you can tell me what the fuse that blows is in what circuit. Try those steps let me know what you come up with and ill be able to give you better info. thanx, rick.

Jun 29, 2014 | 1998 Toyota Camry

1 Answer

I have a 1996 chevy chyenne 305 vortec 4x4 and my ECM fuse keeps blowing. After the first time it blew I replaced it the truck started, ran for 10min and died, the second time I did put a 30amp fuse in...


start chasing wires. Sounds like something is shorted or worse, a hot wire may be grounded out.
Good place to start is all wires headed to the started as that is a common place for a power wire to melt against hot exhaust.
(that was the case for my 99 chevy)
Check all other fuses and make sure none are blown.

Nov 03, 2013 | 1999 Chevrolet Silverado 1500

1 Answer

2003 nissan keeps blowing ign fuse then car dies and wont start till u replace the fuse then itll run bout 10 sec and do it again


The 10amp ECM fuse powers all of the sensors controlled by the computer.
You may have to get a shop manual to get the diagrams to check the circuits. You might check to see what is off when the fuse is blown to verify it involves the computer. If the TPS is shorted to ground it would blow that fuse.

Sep 13, 2012 | 2003 Nissan Altima

1 Answer

Fuel injector fuse is blown, keeps blowing. Engine turns but won't catch and start.


if the injector fuse is blown then the car won`t start as its not getting fuel into the motor to fire.if the fuse keeps blowing then you could have an injector/s that is drawing too much or the injector driver in the ecm may not be any good and needs replacing or a used ecm.it could be a short some where in the wiring for the injector system that is going to ground.

Feb 22, 2012 | 1995 Chevrolet Lumina

2 Answers

95 chevy blazer keep blowing the ecm fuse


If it "keeps" blowing the ECM fuse, it is because you "KEEP" replacing the fuse without diagnosing and repairing the reason the fuse is blown.

Please review these articles:

Where's The Fuse?

What Else Could Be Wrong?

What To Expect From An Online Car Expert

Jun 04, 2011 | 1995 Chevrolet Blazer

1 Answer

Blown ecm fuse


unhook the ecm and check if the fuse does not blow,you will know if it is the ecm,Hope this helps

Sep 06, 2009 | 1988 Chevrolet S-10

1 Answer

Keep blowing ECM fuse on 90 honda accord


I'm thinking the ECM is bad and grounding out, causing the car to blow the fuse. The old gas wouldn't cause this problem.

May 27, 2009 | 1990 Honda Accord

1 Answer

ECM BATT fuse keeps blowing


That fuse provides power for the fuel pump. Either your fuel pump is blowing the fuse or there is a shorted wire.

Nov 22, 2008 | 1995 GMC Jimmy

2 Answers

No spark when trying to start the engine on 98 chevy blazer


Check for dead battery. Test wipers, radio, headlights and heater fan. If all work normally, battery is probably charged and you may have bad starter or alternator ....

Good luck...

Nov 11, 2008 | 1998 Chevrolet Blazer

2 Answers

1998 chevy lumina pcm ign fuse keeps blowing


disconnect pcm and try a fuses if it blow again its our pcm when there to many different code always clear it and drive it and scan it again hope its a fixya thanks pierre

Jul 31, 2008 | 1995 Chevrolet Lumina

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

470 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...