Question about 2002 Buick Rendezvous

Open Question

Removing a knuckle bushing from a buick rendezvous

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 9 Answers

SOURCE: Rear Suspension Knucle bushing

i found them at gmbushings.com didn't have to buy the whole knuckle

Posted on May 08, 2009

Ad
  • 6982 Answers

SOURCE: Is it safe to drive a buick rendezvous with a worn

"safe" is when everything is in good condition...Temporary use on short trips at low speed with slight wear is relatively safe, but it's a judgment call that needs to be made, based upon amount of wear. Best option always is to get it repaired.

Posted on Jul 30, 2009

  • 1 Answer

SOURCE: Rear Suspension Knucle bushing

Last Shot Auto Parts LLC has them ! Best price and Heavy Duty ! Fast shipping too ! They installed real easy and the ride is excellent. $ 79.00 for the set and don't have to ever deal with the problem again !! Thanks LSAPLLC !

They are at www.lsapllc.com with pictures and install instructions also!

Posted on May 09, 2010

  • 37 Answers

SOURCE: how to remove alternator in 2003 buick rendezvous

here is a pdf file showing you how to remove it.

http://www.mediafire.com/?xa0wbaadt3t3tvr

thanks and please rate my answer

Posted on Jan 05, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I find a full diagram of disasssembly and reassembly of of a 2003 buick rendezvous? I need to replace a lower ball joint, coil, knuckles, wheel bearing, and a new tire


all of that will be in the workshop manual available from good parts shops , dealer spares or and technical publication shop

Jul 26, 2017 | Buick Cars & Trucks

1 Answer

How to change shaft stabalizer bar on 2002 buick rendezvous


The stabilizer bard rarely need replaced. There 2 brackets holding the bar in place. They both have a bushing that goes bad from time to time. The real issue with the stabilizer bar is the end- the stabilizer rods on the ends. You can usually replace these in about 1/2 hour and the job is done. Go to your local parts store and order the stabilizer rod and bushing kit, The kit will come with an in instruction sheet, and it is a very simple job.

Dec 31, 2014 | 2002 Buick Rendezvous

1 Answer

How to replace lower control arm in a 2001 Buick century?


Jack up car and support on the frame just behind the wheel. Remove wheel. from bottom side remove the stabilizer link single bolt style is 13mm or saddle type 15mm remove lower ball joint pinch bolt 15mm with a pry bar then lower control arm can be removed from steering knuckle. then remove both lower control arm bushing bolts 18mm or 21mm ? out it comes.

Aug 29, 2014 | Cars & Trucks

1 Answer

How to replace ball joint


If the lower ball joint is riveted to the lower control arm you will be way better off replacing the entire control arm. They are available at your local parts store and are not that much more.

jack up the vehicle. remove the wheel, remove the nut from the ball joint. remove the stabilizer link from the lower control arm. strike the knuckle where the ball joint goes through with a large hammer until the ball joint separates from the knuckle. Remove the horizontal mounting bolt, remove the vertical mounting bolt, remove the lower control arm.

Aug 11, 2014 | 2004 Buick Rendezvous

1 Answer

How to remove alternator in 2003 buick rendezvous


here is a pdf file showing you how to remove it.

http://www.mediafire.com/?xa0wbaadt3t3tvr

thanks and please rate my answer

Dec 03, 2011 | 2003 Buick Rendezvous

1 Answer

After making left turn Buick Rendezvous pulls to left and after making right turn it pulls to right. What could be problem?


Ride height, struts , ball joints , contro arm bushings,
worn tires (out of round). The vehicle is 6yrs old a wheel alignment is in good order.

Apr 09, 2010 | 2004 Buick Rendezvous

1 Answer

Considering buying a 2002 Rendezvous. Heard noises from rear end when going up/down driveway approach. Thought it may be the shocks. Told by mechanic that it is the rear 'knuckle'?


Not exactly great vehicles. The resale value doesn't hold up for trade in purposes. The engines still had issues with their intake gaskets. Yes it could still need shocks being more than 3 years old and would be a good idea if purchased. Let me know if you need any other information.

Mar 01, 2010 | 2002 Buick Rendezvous

1 Answer

Is it safe to drive a buick rendezvous with a worn rear suspension knuckle?


"safe" is when everything is in good condition...Temporary use on short trips at low speed with slight wear is relatively safe, but it's a judgment call that needs to be made, based upon amount of wear. Best option always is to get it repaired.

Jul 30, 2009 | 2003 Buick Rendezvous

4 Answers

Rear Suspension Knucle bushing


i found them at gmbushings.com didn't have to buy the whole knuckle

Apr 28, 2009 | 2003 Buick Rendezvous

Not finding what you are looking for?
2002 Buick Rendezvous Logo

Related Topics:

726 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...