Question about 2002 Buick LeSabre
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
its in the lower right or left hand corner of radiator.
refer to this links diagram for more help.
Posted on Jan 04, 2009
The problem is the crankshaft sensor for sure. It is mounted behind the crankshaft pulley which is pretty difficult to get off as you need a special puller. A shop should charge about 1.5 hours for this job. It is a very common problem.
Posted on Apr 05, 2009
Buick 3.8's are notorious for intake manifold leaks. If you are sure you are not leaking externally (look under the alternator and on the top of the transmission), it could be an intake manifold leak. I've replaced mine...I didn't think it was too hard a job for an amateur.
It could also be a head gasket, but the intake leaks are much more common.
Posted on Dec 25, 2009
Remove the sight shield from the fuel rail. (it's the large plastic shield that dresses up the engine) As you stand in front of the car the alternator is located on rear left side. In front of it is an electrical connector to the MAP sensor. Remove it. Press the PCV valve cover down and rotate it 1/4 turn counterclockwise. It is actully on the intake manifold. Lift the cover, the upper O-ring and the spring from the housing. Remove the pcv valve and the lower O-ring from the intake manifold.
Posted on Mar 23, 2010
Tips for a great answer:
Jun 25, 2011 | 1998 Buick LeSabre
Apr 12, 2010 | 1997 Buick LeSabre
Jan 07, 2010 | 1998 Buick LeSabre
Dec 20, 2009 | 1998 Buick LeSabre
Dec 16, 2008 | 1998 Buick LeSabre
43 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: