Question about 1984 Chevrolet K1500

1 Answer

I need the engine valve spec for a 1984 chevy 6.2 diesel. We are adjusting the valves.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,826 Answers

VALVE ADJUSTMENTS All gasoline and diesel engines in this guide use hydraulic valve lifters, which require no periodic maintenance or adjustment. However, in the event of cylinder head removal or any operation that requires disturbing or removing the rocker arms, the rocker arms must be adjusted in order to position the pushrods to allow the hydraulic lifters to maintain zero lash. Refer to the valve lash adjustment procedure under Rocker Arms, earlier in this Section.

Posted on Aug 21, 2010

Testimonial: "Thanks for this response. After removing the valve cover, they are hydraulic lifters. We called 2 leading parts stores and they did not know that."

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the specs on tappet cover settinigs


I assume you are asking for the valve clearances?

The 1.3 and 1.6 are adjusted hot to 0.2 mm inlet and 0.3 mm exhaust.

The 1.6 GT model are adjusted cold to 0.15/0.25 mm inlet and 0.2/0.3 mm exhaust.

The 1.8 diesel is also adjusted cold to 0.2/0.3 mm inlet and 0.25/0.35 mm exhaust.

Nov 04, 2015 | 1984 Toyota Corolla

1 Answer

Need valve lash specs for 1980 suzuki dr400


Suzuki DR400S - Motorcycle Specs

www.motorcyclespecs.co.za/model/suzu/suzuki_dr400s%2080.ht
1980. Engine. Air cooled, four stroke, single cylinder, SOHC, 2 valves per cylinder ....Valve adjustment can be done without a feeler gauge and the CDI has ..

Dr400 valve adjustment 1 - YouTube

? 2:08
www.youtube.com/watch?v=BH-KFrpwo3w
Nov 19, 2010 - Uploaded by obtrailriders
Dr400 valve adjustment 1. ... Suzuki DRZ 400 Valves clearance check \ sprawdzanie luzu zaworowego PART 2 ...

Nov 01, 2015 | Suzuki Cars & Trucks

1 Answer

Looking for torque specs on a mistubishi diesel engine valve cover K3B-16094


Valve covers and pans are really light, you use inch pounds and the spec is 5 to 12 inch pounds.

Aug 11, 2012 | Cars & Trucks

1 Answer

Valve lash specs 1984 2.8


both answers above are wrong. the 1984 2.8 ford cologne engine had solid lifters and requires valve lash settings of ,014 intake and .016 exhaust.

May 15, 2012 | 1984 Chevrolet S-10

2 Answers

Valve lash procedure


i need to know how to adjust the valves on 02 pont sunfire

Nov 20, 2011 | 1991 Chevrolet K1500

1 Answer

Torque spec for pushrods on a 3.1 v6 engine


Its not a torque spec the engine has hydrolic lifters and needs to be adjusted with a feeler gauge . Its called a valve lash adjustment its around 14 to 16 thousands of an inch the intake valve is the lower one because the exhuast gets hotter and expands more and also needs to be done in a speiscif sequence but after you line it up you just turn the engine manualy and you do them right down the line ,You should call a chevy dealer to make sure of the exact clerances and order for your vehicle but if done right it will run real quit and likely much better

Jun 04, 2011 | Isuzu Rodeo Cars & Trucks

1 Answer

I need torque specs on rockers and lifters for a 2005 dodge ram 2500 5.9 24 valve diesel engine


Lubricate the crossheads and push rod sockets and install the rocker arms and pedestals in their original loca-
tions. Tighten bolts to 36 N·m (27 ft. lbs.) torque.

Don't forget to adjust your valve lash.

here is a link to the Factory Service Manual

Jul 28, 2010 | 2005 Dodge Ram 2500 Truck

1 Answer

Timing belt installation


Good afternoon! Ive got you covered on this one! Have a great weekend!! I have enclosed figures for the diesel engine,the 8 valve gas and 16 valve gas. yours should be the 16 valve configuration as you will see in the figures.a3c1ad4.gifaf8e237.gifbc25dec.gif021398e.gif00bd376.gif5a4b57b.gif

Sep 25, 2009 | 1984 Mitsubishi SPX Pickup

1 Answer

Roller lifter adjustment 5.7 chevy vortec 1999


Crank the engine until the mark on the damper aligns with the TDC mark on the timing tab and the engine is in #1 firing position.

To adjust a valve back off the adjusting nut until lash is felt at the pushrod. Tighten the nut until all lash is removed. This can be determined by rotating the pushrods with your fngers. When all lash is removed the pushrod will stop rotating. When all play is removed rotate the nut one full turn.

With the engine in #1 firing position the following valves can be adjusted:
Exhaust 1,3,4,8
Intake 1,2,5,7

Crank engine one full revolution - The following valves can now be adjusted:
Exhaust 2,5,6,7
Intake 3,4,6,8

Apr 14, 2009 | 1999 Chevrolet Tahoe

1 Answer

Need valve adjustment specs for 1979 ford f-250 6 cyl


did u soak the lifters in oil 1st before installing them? if they are pumped up u bring that cylinder u are adjusting up on compression stroke, then adjust rocker to zero lash and then 1/2 more turn of the adjusting nut.

Mar 22, 2009 | Ford F-250 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

473 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...