Question about 2003 Oldsmobile Alero

1 Answer

Key will not work in door and window off track in same door

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 6,826 Answers

The key and the window being off track indicates to me that the lever inside the door may be jammed with the window or may have become dislodged.

Take the panel off of the door inside, if you can get the door open. This will allow you to take a better look at what is wrong.

The window being off the track indicates that the window regulator may be broken, or the pins that hold the window onto the regulator are sheered.

Posted on Aug 21, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i get it back on track


remove innder door panel and carefully put it back on track

Jun 08, 2015 | 1993 Chrysler Imperial

2 Answers

Window off track of chevy tahoe rear window how do you get it back up


If it is off track just take the inner door panel off and put it back on track. if that don't work replace the broken window regulator and check the window motor to see if it is still good. replace if necessary .

Feb 16, 2013 | 2004 Chevrolet Tahoe

1 Answer

Troubleshooting 00 chevy Cavalier rear manual window


Remove the door panel and make sure the window is still on the tracks ...It is a fairly simple fix.Remove the to nuts and washers from the window track and reinstall the window on the track and tighten up nuts..Be careful when cra nking on the window crank,the window may shatter while placing pressure on it while its out of track..

Aug 02, 2012 | 2000 Chevrolet Cavalier

1 Answer

My driver window has stopped working but the motor seems to still work maybe window is off track? i dont know how to open door panel to see whats wrong with it?


if you can hear the motor working but the winodwo is not coming up then it is probably out of the track.. there should be only a few screws holding the door panel on. remove it and put the window in down position. Then you can use your hands to work the window up. When you get it in the up position you can see through the door where the tracks are. Just lower the window back down in the tracks. But first put some good adhesive or silicone in the very bottom track that the windows rests in so that the window will stay attached to the bottom track.. once you have done that, raise the winding using the switch and leave the window in the up position until you are sure the adhesive is dry.

Mar 25, 2011 | 1992 Saturn SL

1 Answer

How to put window on passenger side back on track


take the door panel off... put the window in down position... now you should be able to work the window up with your hands and you will be able to see inside the door where the tracks are and where the window needs to go... just line it up in the tracks and let it come down into place... you will need some good adhesive or silicon in the bottom track which holds the window in place and keeps it from being able to get out of the tracks ...put the adhesive in the bottom track before you push the window all the way down into the bottom track... roll up the window all the way but do not roll it down again until the adhesive has had time to dry fully... replace door panel

Mar 25, 2011 | 1995 Oldsmobile Cutlass Ciera

1 Answer

Back seat passenger power window of a 2003 ford explorer is not working. I can hear the motor working but the window doesn't go up or down. I can push it up and down manually but now the window is inside...


The window came off the tracks. You will need to take the inner door panel off and get to the window track and put the window back in the track.

Jul 16, 2010 | 2003 Ford Explorer

2 Answers

Rear passenger side window just fell down and won't go back up. is this possible?


Yes its possible, the roller has come out of the track You would have to remove the arm rest and panel screws off and remove the cover with the door open unsnap the clips on the door and let the door hang down use a flashlight to see the roller that's off track pick the glass up and slid into the glass guides and move the window up till you get the roller into the track, have the key on in case you need to raise the window up or down to get it to go into the track, if the roller is broke you can buy one at a junk yard, if the roller is ok then the stop pin may have fallen out and you will have to use a roll pin to keep the roller from coming out of the track. Hope this helps.

May 14, 2010 | 2004 Cadillac CTS

2 Answers

Driver side window falls down it is a power window


Window has come off track,try to lube the track, reset the window in the track an use a apoxy glue let it sit for a few hours an it should b fine that's what I did to mine, that last snow storm we had my truck was covered,I was keying my truck warm up I went to open the window it was stuck, so I gave it a little hit an then it fell in the door an the snow came in lol, then I found out what to do I never had a prob again

Jan 02, 2010 | 2001 Ford Expedition

1 Answer

My window is off track. motor is still working.


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you'll be able to get to the tracks. You may need to get some replacement clips to remount the window to the track

Oct 13, 2009 | 2004 Jeep Liberty

2 Answers

2004 Pontiac Grand Am drivers side window is off track.


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you can readjust the window mechanicals

Sep 24, 2009 | 2003 Pontiac Grand Am

Not finding what you are looking for?
2003 Oldsmobile Alero Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...