Question about 2000 Chevrolet Blazer

3 Answers

1 2 3 4 gear all good going down the road then try to pass and not down shifting engine revs up but dont go into gear

Posted by on


3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.

    New Friend:

    An expert that has 1 follower.


    A rookie expert who has answered 20 questions on their first day.

  • Expert
  • 49 Answers

Automatic transmission?
Was a partner at a transmission shop and had this same scenario explained atleast once a month.
Always the same fix.
Remove the floor mat that is keeping your gas pedal from going to throttle position to engage downshift .

Posted on Nov 12, 2014

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I have the same problem with my 2000 Chevy blazer zr2 can figure it out

Posted on Jun 16, 2013

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Sounds like clutch slipping

Posted on Aug 21, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Idles high from first to second gear .

Define idles high like its going high rpms before shifting or the engine itself is high reving if its high rpming when shifting its mostly you tranny going out you can try tranny fix oil I used it on my truck when it had shifting problems and ive had no problems since it takes a few days to work though and if its the motor itself it could be a lot of things but I dont know much of the problem based on what you told us

Mar 10, 2014 | 2004 Hyundai Elantra

1 Answer

My granddaughter has a 2003 Alero 6 cylinder,with 70,000 miles which bent all the pushrods when she accelerated to pass a car. Her (certified) mechanic told her it was because the car was driven below 55...

I say find a different mechanic that knows his trade as that one doesn't
As for your statement it maybe possible but not probable as the engine is designed to rev out without engine / valve train problems
High rpm with worn valve train/hydraulic lifters may cause a lifter lock and cause the problem as it allows the lifters to pump up and cause the valve springs to become a block and that will mean that the rockers can no longer move so that will bend the push rods
accelerating to pass a car and it happened would indicate a problem in the transmission actuator as the transmission will down shift initially ( passing gear where the engine rpm increases by 2,000 rpm but then the manifold vacuum takes over and shifts the ratios in the transmission which brings the rpm down as the road speed builds up

Feb 11, 2018 | Cars & Trucks

1 Answer

2006 Ford Explorer shifts hard between 2nd & 3rd gears, both up & down, but shifts normal between 1st & 2nd, and in & out of overdrive. All was normal then almost not working the next

It sounds as though your valve body may have a lot of particulates that have entered into it causing the valves to act sluggishly. Unfortunately, this is a condition that can only be taken care of by your mechanic and is not something that the average person can fix themselves.

Aug 28, 2017 | 2006 Ford Explorer

1 Answer

Engine revs up when putting excelarator in passing gear but trasmission does not shift into passing gear. it is a 86 olds toranado

Has the transmission flushed and the filter been changed recently? That could be the problem of it not shifting into passing gear.

Jun 18, 2011 | Oldsmobile Toronado Cars & Trucks

1 Answer

Transmision will not shift into overdrive or kick down into passing gear

It upshifts 1 to 2 to 3 fine? Rev is good? Do you have a check engine light on? Sounds like a bad Throttle position sensor.

Aug 07, 2010 | 2001 Chevrolet Silverado 1500

1 Answer

Will not rev above 4000 rpm. Shifts hard

Possibility of fuel line filter being full of gunk, replace with new one?

Apr 24, 2009 | 2000 Saturn L-Series

1 Answer

The car wont go about 20 miles and hour but the RPMs rev upHELPME

hello,have you a regular maintenance service to your car?better to check your fuel filter for contamination,transmission filter or your brake system maybe stuck-up piston caliper,ty

Apr 16, 2009 | 1993 Mercedes-Benz 190

1 Answer

My 1990 towncar hesitates at third gear going 38 mph it first revs then switches into the gear..also it doesnt go into passing gear when i pass a car it wont shift down..

your tranny is going out. VERY common with the 8 cylinders. Have seen it many many times. You should still be able to drive it for a year or so before it goes completely.
When it revs up just let off the gas til the rpm's go down, and then slowly give gas again.

Mar 04, 2009 | 1992 Lincoln Town Car

1 Answer


Is there a check engine light on at all?

Aug 16, 2008 | 1994 Honda Accord

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides