Question about 2004 Kia Sedona

Open Question

What is the size of the Front Hub/Axel Nut on a 2004 Kia Sedona Van?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 184 Answers

SOURCE: 2003 kia sedona. what size

the size of socket ur looking for is 32mm & as for bearing i'm sure that its a complete bearing.

Posted on Feb 03, 2009

iambanshee74
  • 3489 Answers

SOURCE: nut Torque Specification Guide 2004 Kia Sedona

Lower ball joints. Tighten the pinch bolts to 69-85 ft. lbs. (93-115 Nm). Outer tie rod ends. Tighten the nuts to 43-58 ft. lbs. (59-78 Nm). Sway bar links. Tighten nuts to 69-85 ft. lbs. (93-115 Nm). Hub retaining nuts. Tighten the hub nuts to 177-199 ft. lbs. (240-270 Nm). Front wheels. Tighten the lug nuts to 65-79 ft. lbs. (88-108 Nm).

Posted on Jan 28, 2010

drsinister69
  • 2317 Answers

SOURCE: how do i change the belts on a 2004 kia sedona van

There is a tensioner pulley for each belt, you loosen the nut on the front of the pulley, then there is a tensioner bolt that you loosen, that will move the pulley away from belt to remove the belt. You'll need to get to them from the passenger side under the car. You'll need to remove the plastic covers to get them.

Posted on May 02, 2010

  • 52 Answers

SOURCE: i have a 97 dodge ram 1500 i am trying to figure

1-11/16

Posted on Feb 15, 2010

SOURCE: i am replacing the front

Most likely 32 or 36 mm socket

measure the nut & divide by .0395
to convert to metric

Posted on Mar 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you replace the rear wheel hub on a 2003 Kia sedona. All I can find is directions on front not back.


Wheel Bearings

Print
Adjustment

2002-05 Models
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Remove or disconnect the following:

    Rear wheel Brake drum Hub cover Cotter pin Lock nut cover
  3. Adjust the locknut to achieve wheel bearing play of 0.001-0.006 inches (0.025-0.152 mm).
Removal & Installation

2002-05 Models
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Remove or disconnect the following:

    Rear wheel Brake drum Hub cap Cotter pin Lock nut cover Lock nut Wheel bearing retainer washer and the outer wheel bearing Hub assembly Grease seal Inner wheel bearing
  3. Clean and inspect the wheel bearings and races for unusual wear or damage. Replace parts as necessary.
To install:
  1. Pack the wheel bearings with grease for assembly.
  2. Install or connect the following:

    Inner wheel bearing Grease seal Hub assembly Lock nut. Adjust the locknut to achieve wheel bearing play of 0.001-0.006 inches (0.025-0.152 mm). Lock nut cover Cotter pin Hub cap Brake drum Rear wheel

Apr 03, 2015 | 2003 Kia Sedona

1 Answer

What is the 2005 kia rio front axel nut torque ???


Hi,
for the front hub its 157 - 235 Nm.

Sep 20, 2014 | 2005 Kia Rio

1 Answer

I have a 2005 kia sedona lx and there is a howling sound on the front passender side. sounds like over size tires on it


if it only makes noise when the van is moving it might be a bad hub bearing. if it makes noise when its not moving and when its moving it could be a bad pulley bearing on the engine.

Aug 05, 2011 | Kia Sedona Cars & Trucks

2 Answers

How do i change the belts on a 2004 kia sedona van


There is a tensioner pulley for each belt, you loosen the nut on the front of the pulley, then there is a tensioner bolt that you loosen, that will move the pulley away from belt to remove the belt. You'll need to get to them from the passenger side under the car. You'll need to remove the plastic covers to get them.

Jan 29, 2010 | 2004 Kia Sedona

1 Answer

Nut Torque Specification Guide 2004 Kia Sedona front wheel hub assembly


Lower ball joints. Tighten the pinch bolts to 69-85 ft. lbs. (93-115 Nm). Outer tie rod ends. Tighten the nuts to 43-58 ft. lbs. (59-78 Nm). Sway bar links. Tighten nuts to 69-85 ft. lbs. (93-115 Nm). Hub retaining nuts. Tighten the hub nuts to 177-199 ft. lbs. (240-270 Nm). Front wheels. Tighten the lug nuts to 65-79 ft. lbs. (88-108 Nm).

Jan 28, 2010 | 2004 Kia Sedona

1 Answer

I need to change rear bearings an a KIA Sadona 2004 van


not bad to do remove cap over hub remove lock nt
whole hb should come off replace seals and new races for new bearings when tighting back up nut tighten slightly over snug and then back off1/4 wrist turn nut should be about 26 inch pounds

Nov 18, 2009 | 2004 Kia Sedona

1 Answer

How do I go about changing the bearings in my front hub?


In order to change them you must do the following.
1) Remove tire
2) decompress the brake caliper
3) unbolt brake caliper and lay it to the side (no need to disconnect brake line
4) remove castle nut from axel
5) unbolt stearing linkage from ball joint (on van door side of hub)
6) unbolt strut from hub (make sure the vehicle is jacked up high enough to allow the hub/wheel assymbly to hang as low as possible.
7) remove CV axel from hub
8) unbolt lower ball joint from hub
9) take hub out
10) remove seal and retainer ring form front and back of hub (retainer ring is on the front side seal is on the back side
11) I highly recommend a press (rent one it is worth it, trust me) and remove the old bearing.
12) insert new bearing and press in (again I recomend renting the press)
13) put everything back the way it came off and your done.
NOTE: I strongly suggest placing the bearing in the freezer for several hours before you start working on the replacement. This lets the metal contract slightly and makes it easier to get it into the hub.
Also you might need a small propain torch to heat the hub up to make it easier to remove the old bearing (especialy if you do not have a press, again RENT THE PRESS)
Good luck.

Oct 18, 2009 | 2003 Kia Sedona

1 Answer

Can't get the bearing hub out to replace the bearing


You'll need to remove the 2 strut bolts holding the hub to the strut, remove the axle nut. Pull the hub towards you and try taping on the axleshaft to try to push it out. You might try spraying some WD-40 where the axleshaft goes thru the hub.

May 24, 2009 | 2006 Kia Sorento

4 Answers

Roaring noise when speed gets about 50mph


I have the same van there was a factory recall to repair the bearings in the front tires. If taken in to a kia dealer this problem will be repaired for free.

Dec 05, 2008 | 2004 Kia Sedona

Not finding what you are looking for?
2004 Kia Sedona Logo

Related Topics:

645 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...