Question about Ford F-150

1 Answer

What is the torque sequence for the head bolts on a ford 351 cleveland?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 707 Answers

On the cleveland i would always take the even setting torque all around the head and........... then the x patteron evenly out from front to back............Make sure to use torque wrench at equal intarviles each time to specific torque required....Hope this helps.

Posted on Aug 21, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need head bolt torque specs for a 1996 saturn sl


Quote:





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.

Sep 19, 2013 | 1996 Saturn SL

1 Answer

WHAT IS THE PROPER HEAD BOLT TORQUE SEQUENCE AND SPECS FOR THE INLINE 6 4.9? FORD


OKAY GET A PIECE OF PAPER I WILL GIVE YOU 2 ROWS OF NUMBERS TO WRITE DOWN. THAT WOULD BE YOUR TORQUE SEQUENCE. OKAY FROM LEFT TO RIGHT WRITE NUMBERS. 11 7 3 2 6 10 14 OK WITH THESE NUMBERS PLACE THEM UNDER FIRST SET OF 7 NUMBERS I GAVE YOU. FROM LEFT TO RIGHT. WRITE NUMBERS 13 9 5 1 4 8 12. NOW THIS IS HEAD BOLTS TORQUE YOU HAVE 3 HEAD BOLTS PASS FIRST PAST TORQUE BOLTS ALL TO 50 - 55 FT LBS FOR SECOND PASS TORQUE ALL BOLTS 60 - 65 THIRD PASS TORQUE ALL BOLTS TO 70 - 85 FT LBS.

Nov 13, 2010 | Ford F-150 Cars & Trucks

1 Answer

Does anyone have the bolt torque specifications for a ford 1995 5.8L. I need the cylinder heads, crankshaft mains and connecting rod torque.


Head bolts, 105-112 Foot pounds (Final torque)
Final torque must be reached in 3 equal steps. Recheck final torque in sequence.
Main Bearing Caps, Torque in sequence Step 1: torque to 50 Ft/Lbs Step 2: torque to 105 Ft/Lbs
Rod Bearing Caps, 45 Foot pounds (Final torque)

May 31, 2010 | 1995 Ford F150 Styleside Regular Cab

1 Answer

What is the right Torque Specification of the cylinder head bolt,main bearing and connecting rod bearing for a 1997 Ford F 150 4.2 liter? Thank you...


Cylinder heat bolt torque:
Torque sequence --------- front | 7 3 1 5 | | 8 4 2 6 | --------- Step 1: Torque all bolts in sequence to 14 Ft/Lbs Step 2: Torque all bolts in sequence to 29 Ft/Lbs Step 3: Torque all bolts in sequence to 36 Ft/Lbs Step 4: in the sequence, loosen the cylinder head bolts three turns. Step 5: Tighten short bolt to 15 - 32 Ft/Lbs Step 6: Tighten long bolt to 30 - 36 Ft/Lbs Step 7: Tighten all bolt to 175- 185 degree note: Do not loosen all of the cylinder head bolts at one time. Each cylinder head bolt must be loosened and the final tightening prior on the next bolt in the sequence.
Main bearing torque:
Torque sequence: Step 1: torque bolts to 91 Ft/Lbs with the exception of the rear main bearing cap Step 2: torque rear main bearing cap bolts to 88 Ft/Lbs Step 3: torque brace bolts to 40 Ft/Lbs
Connecting rod torque:
Torque sequence Step 1: Torque to 29 Ft/Lbs Step 2: Turn an additional 90 degrees

May 17, 2010 | 1997 Ford F150 Regular Cab

1 Answer

Need torque specs for 1994 ford escort 1.9 ltr head bolts


Torque new cylinder head bolts in sequence to 44 ft lb. Loosen bolts approximately two turns, then torque bolts in sequence to 44 ft lb. Turn bolts an additional 90 degrees in sequence, then an additional 90 degrees

Torque sequence
9 3 1 5 7
8 6 2 4 10

May 07, 2010 | 1994 Ford Escort

1 Answer

Torque settings for 351 cleveland


Fastener Type

Torque Spec.

Main cap bots 95-105 ft.-lbs. Connecting rod bolts 40-45 ft.-lbs
45-50 ft.-lbs
for Boss 351C Cylinder head bolts (follow factory torque sequence) 105 ft.-lbs.
125 ft.-lbs for
Boss 351C Rocker arms (non-adjustable) 18-22 ft.-lbs. 5/16" Intake manifold bolts 21-25 ft.-lbs. 3/8" Intake manifold bolts 28-33 ft.-lbs. Oil pump bolt 25 ft.-lbs. Cam bolts 40-45 ft.-lbs. Cam thrust plate bolts 9-12 ft.-lbs. Harmonic damper bolt 70-90 ft.-lbs. Flywheel/ flexplate bolts 75-85 ft.-lbs. Pressure plate bolts 35 ft.-lbs. Front cover bolts 12-18 ft.-lbsI hope this helps you and please rate this

Dec 26, 2009 | Ford F-350 Cars & Trucks

1 Answer

I have a 1965 food falcon with a mustang 302 (1978 ) v8. how do i know if it is a windsor or not?


Well there is a 302 cleveland, they are mainly an Australian engine. Identifying one is much like telling the difference between a 351 windsor and a 351 cleveland. Based on the fact that it's from Ford's 335 engine family. 8 cap screws to hold on the valve covers, the block is longer do to the timing chain housing being integrated. The fuel pump bolts are mounted vertically, and the exhaust bolt holes are diagonal. Also, a big difference between an american 302 and an aussie 302 cleveland, is the connecting rods for the cleveland are 6.000''. Where the american 302 connecting rod length is 5.090". Also, referring to a 302 as a windsor is incorrect, it's block families name is the 90 degree v8. The only engine in that family that is properly named the windsor, is the 351 windsor. The 90 degree family also includes the 302 boss. The boss has cleveland style heads, and the block has screw in freeze plugs.

Nov 27, 2009 | 2005 Ford Futura

1 Answer

How to adjust Ford 460 heads?


9 5 1 3 7 10 6 2 4 8 This is the head bolt sequence which should be torqued to 130-140 ft-lbs

Note: the numbers are represenative of the bolt location.

Mike...

Nov 24, 2009 | 1982 Ford F 250

2 Answers

FORD 351 W CYLINDER HEAD BOLT TORQUE SPECIFICATIONS? NEED SEQUENCE.


Torque is 85 ft/lbs of torque. Tighten the bolts starting in the center of the head and working your way out to the ends. Go very slowly and only tighten slightly each time you move from the center to the outside. You must pull the head down very slowly each time. Here is the sequence, a127595.png

Sep 30, 2009 | 1995 Ford F250

1 Answer

Ford 351 cleveland


59f704c.jpg
OK. I hope this information is what you looking for.
And hope work for you. Thank you for use fixya.

Jul 11, 2008 | 1981 Ford F 100

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

401 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5581 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...