Question about 1993 Isuzu Rodeo

1 Answer

I have a 1993 isuzu rodeo 3.2l. It has set without running for about a year now. when i try to start it, it will not start. i tested the fuel line and it has withinn the specks, i have changed the crank sensor, and still the same problem. i tried running starter fluid in the car and it does not work. I have heard ecu's have a saftey fault that will not let the car run, but my question is why isent it, and how to reset it

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Before you do any of this resetting or anything, there are 3 things you need to check for first.
1. does the vehicle have spark ? remove each spark plug wire and test for a spark.
2. does engine have compression ? check each cylinder for proper compression with a tester, should be at least 125 psi. per cylinder.
3. check for fuel, remove each spark plug, is the plug wet ? If the plug is wet, you have fuel, if dry, you have no fuel.

Posted on Aug 21, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Diagrams of the fuel line system on a 1999 Isuzu rodeo


the whole system. end to end,
which engine, and in what country? USA , Canada. or the Austrialian Holden Rodeo.>??
GAS OR DIESEL ?????
we cant guess engines here, we beg but only 1 in 10,000 say it.
making any answers wrong. or wild guessing.

if in USA are you
alldata.com has this. why not read it.
or buy the FSM book, and read that...
working book free, is hard, like super hard for any DIY work..

if MPI system, all have this year range (early)
a loop system.
there is no need for a diagram unless the car was bought as a basket case with missing parts. is it?
its just 2 pipes. one from tank to the fuel rail,
then the FPR returns the fuel to the tank.
a simple loop. (later in USA the EPA banned this loop, end story that)
there are like 6 to 8 pressure test on any MPI loop system.
did you read the FSM on that? its covered.

cranking pressure
running pressure
wot pressure (fpr tests) wide open throttle.
leak down tests (time to leak down)
shut test. (block return line)
injector balance tests.
and i do 3 FPR vacuum/pressure tests.... on all.....

each are vital tests to finding problems.


4 engines , just in USA>
not one stated.....

Jun 14, 2015 | 1999 Isuzu Rodeo

2 Answers

My Isuzu rodeo will not start,,tries to turn over , but wont..gets fire, get gas..just will not start.


If the spark to all plugs is healthy and that spark coincides with the introduction of the fuel then it should start. Is it catching at all when being turned over
Have you had the timing checked?
Is the fuel pressure good?
I would....personally speaking, perform a compression check and, if that proved okay, I would have an OBD scan to check for error s then go from there

Mar 02, 2015 | Isuzu Cars & Trucks

1 Answer

Wizard isuzu


Check your Fuel Lines and your Fuel Pump. (I just fixed a problem with my 2001 Isuzu Rodeo Fuel Return Line).

Also remember that in Rodeos, as soon as you turn your car key to turn the ignition on (just to make the dashboard lights go on) a certain amount of gasoline gets pumped to your engine in preparation of you turning the key all the way to crank the ignition and start the car. In other words, even before you turn the key all the way to crank the ignition, the Fuel Pump will pump some gasoline through the Fuel Lines to your engine (it will pump the gasoline for about 4 seconds then stop). So when you go to start your Rodeo, remember to turn the key with one continuos motion so that you start the ignition cranking while the gasoline is being actively pumped.

In addition, you should never turn the ignition lights on without turning the key all the way to start the engine. Doing so could cause that bit of gasoline that was pumped to start the engine to just sit there and create problems.

Jun 03, 2014 | 2001 Isuzu Rodeo

1 Answer

93 isuzu rodeo with 3.2 engine cuts off when you give it gas


Vehicles need fuel, spark, and air to run. You started with the basics like spark and fuel, great. Slow down on the parts installations and take yourself back to basics.

1. Check your fuel lines for leaks.
2. Inspect the vacuum lines for cracks ( you stated it got cold outside. This may contribute to old hard lines cracking).
3. Remove the air filter box and filter and make sure airflow is free of any blockage. Test car without air filter installed and see if it stays running while giving gas. If it does replace air filter
4. Check the throttle body Mass Air Flow Sensor. This detects how much air is coming into the system. It reports to the main computer. If the MAF tells the computer there is significantly not enough air the the system will shut down. My guess would be a big vacuum leak or you have a bad MAF.

Apr 23, 2014 | 1993 Isuzu Rodeo

1 Answer

Trying to find leak in clutch system os 1993 rodeo need diagram


Did you bench bleed the master or slave cylinder ? Is Your Brake pedal Hard ? Could be your Brake booster . send image for more understanding of your problem

Feb 25, 2014 | 1993 Isuzu Rodeo

2 Answers

1993 rodeo not running no power to fuel pump


if there is no power to the fuel pump check relays and fuses....UNDERHOOD FUSE & RELAY PANEL IDENTIFICATION Fig. 2: Underhood Fuse & Relay Panel Identification Courtesy of ISUZU MOTOR CO. Fusible Link Identification ? A - 80 Amp (1991-92 3.1L) ? A - 60 Amp Main-1 ? B - 30 Amp Main-2 ? C - 30 Amp (1993-94) ECM (3.2L) ? D - 30 Amp Condenser Fan (A/T Models) Relay Identification ? 1 - Headlight Relay ? 2 - A/C - Heater Relay ? 3 - Starter Relay ? 4 - A/C Compressor Relay ? 5 - Charge Relay ? 6 - Fuel Pump Relay ? 7 - ECM Relay ? 8 - Wiper Relay Fuse & Circuit Breaker Identification ? 1 - 15 Amp (1991) ECM, Fuel Injection System ? 1 - 15 Amp (1992-94 2.6L) ECM, Fuel Injection System ? 1 - 10 Amp (1992-94 3.1 & 3.2L) Heated Oxygen Sensor, Fuel Injection System ? 2 - 20 Amp (1991-92) Fuel Pump ? 2 - 20 Amp (1993-94 2.6L) Fuel Pump ? 2 - 15 Amp (1993-94 3.2L) Fuel Pump ? 3 - 10 Amp (1991) ? 3 - 15 Amp (1992-94) Turn Signal Lights, Hazard Warning Flasher Lights ? 4 - 10 Amp Horn, Door Locks ? 5 - Not Used (1991 3.1L) ? 5 - 10 Amp Charging System, Charge Warning Light WARNING: Always disconnect battery ground cable before servicing "high- current fuses. It is recommended that "high-current" fuses be replaced by a qualified technician. Page 1 of 2 FUSES & CIRCUIT BREAKERS -1994 Isuzu Rodeo LS? 6 - Not Used (1991) (1992-93 2.6L) ? 6 - 10 Amp (1992-94 3.1L & 3.2L) A/T Interlock System ? 6 - 10 Amp (1994 2.6L) Heated Oxygen Sensor, Fuel Injection System ? 7 - 20 Amp Heater/Air Conditioning Blower Controls ? 8 - 10 Amp Air Conditioner Compressor Controls ? 9 - 10 Amp Right Headlight ? 10 - 10 Amp Left Headlight © 2008 Mitchell Repair Information Co., LLC.
62217_isuzfuse_1.jpg
Underhood fuse block swap out relay #7 thats the ECM relay.
Ground Circuits Using a DVOM, touch negative voltmeter lead to a good ground. Touch positive voltmeter lead to each ground terminal. With vehicle running, voltmeter should indicate less than one volt. If reading is greater than one volt, check for open, corrosion and loose connection on ground lead. See ECM GROUND LOCATION table for ECM ground location.
Page 1 of 1 SYSTEM/COMPONENT TESTS - 2.6L EFI -1994 Isuzu Rodeo

Mar 28, 2010 | 1993 Isuzu Rodeo

1 Answer

I have a 1993 Isuzu Rodeo 3.2 engine. The Timing Has Jumped


You can do a compression test, compression should be at least around 128 psi with no more then 20 psi difference between cylinders.

55f39f7.gifa5769ae.gif

Jun 08, 2009 | 1998 Isuzu Rodeo

Not finding what you are looking for?
1993 Isuzu Rodeo Logo

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...