Question about 1990 Chevrolet C1500

2 Answers

How do I bleed the air from a clutch master cylinder on a 1990 C1500 truck?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,826 Answers

Find the bleed screw on the transmission,fill the reservoir for the master,then bleed it at the master if possible,by push one time to the floor,and shutting the bleed screw ,then do it two to three times,but just push it once,do not pump,then move down to the slave and do the same thing.If this was at all helpful,please rate thank you.

Posted on Aug 21, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 128 Answers

Fron the slave cylinder located on the side of tranny push three times hold turn bleeder do it five times but keep checking resivior

Posted on Aug 21, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My clutch pedal wont come back up after replacing the clutch slave cylinder and master clutch cylinder


if the components were installed right then you still have air in the system that needs to be bleed. even a small amount of air can cause problems.

Sep 07, 2014 | 1990 Honda Accord

1 Answer

CLUTCH HAS NO PRESSURE


If hydraulic then bleed out the air at the slave cylinder and or replace slave and clutch master cylinder. If cable operated then replace the broken cable.

Oct 31, 2013 | 1990 Chevrolet C2500

1 Answer

I have a 1990 535i and the clutch peddle does not come all the way back up when after I let off the peddle. What would make this problem happen and what can I do to fix it?


You could have air in the clutch cylinder or there could be wear in your clutch master cylinder, You need to start by checking the fluid the the reservoir and then try bleeding the clutch, if this doesn't help then you will need a repalkcement master cylinder, It is recommended that you replace the slave cylinder at the same time as well as the flexible rubber hose.

Mar 08, 2012 | 1990 BMW 5 Series

2 Answers

Can you adjust the clutch pedal on a 1990 full size bronco


The clutch is operated hydraulically, and there is no adjustment. If your problem is that the clutch will not disengage or is hard to disengage you may be low on fluid or have air in the line. There may be a leak either at the master cylinder or the clutch slave cylinder. Bleeding the slave cylinder may restore pedal pressure. If the problem is that the clutch engages high on the pedal the problem is likely a worn clutch disc.

Jul 30, 2011 | 1990 Ford Bronco

1 Answer

1990 jeep wrangler just got all new master/slave cylinder pressureplate piolt bearing or throughout bearing / had flywheel refaced had pedal frst time engaded and second time no pedal and third time had...


You have to bleed it at the slave cylinder not the master cylinder.Keep the bottle on the m/cyl full at all times and do not disconnect any lines.Bleed the system at the sl/cyl.Then do it again after a short drive.You still have air in the system.If you take off any m/cyl lines,you have to start all over again.
Hope this helps

Apr 05, 2011 | 1990 Jeep Wrangler

2 Answers

I press on the clutch and it seems that I have no clutch. I installed a new presure plate and when I was done I went to turn on the truck the clutch pedal does not seem to work the clutch


I don't know if you have hydraulic clutch cylinder but sounds like it may be bypassing or have air in system. Try bleeding system and checking for pressure when pedal is pushed

Mar 09, 2011 | 1989 Chevrolet C1500

1 Answer

I replaced clutch master cylider and sleigh cyclinder and still dont have any clutch pressure padel wont stand up and cant get any gears


?. Did you bench bleed all of the air out of the 2 master cylinders before installing on your vehicle, it sounds like that it has air in the sysytem, try bleeding the cltch master cylinder and the bleed off the slave cylinder, that should put you on par.

Oct 20, 2010 | 1990 Nissan 300ZX

2 Answers

When you press down the clutch nothing happens


The master,or slave cylinder ,are bad.

May 25, 2010 | 1990 Toyota Pickup

1 Answer

Replacing acura legend clutch master cylinder


Well, it just unbolts, remove fluid line and replace the unit.

What is very important is to "bench bleed" all of the air before mounting unit. parts stores have easy bleeding kits that essentially reroute the output from the unit, directly back to the reservoir. if you do not pre bleed, you may die before you ever get it working...

May 24, 2010 | 1990 Acura Legend

2 Answers

Have a 1990 150 lariat 4x4 put new trans in,clutch,slave cyclinder,and clutch master cyclinder, still having problems with the clutch pedal being low, i bleeded the clutch several time but it won't come...


I assume that the master cylinder is correctly installed. In that case the master cylinder's piston rod (to which the pedal is attached) is too short or maladjusted.

Apr 24, 2010 | 1990 Ford F150

Not finding what you are looking for?
1990 Chevrolet C1500 Logo

465 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...