Question about 2000 Mercury Villager

1 Answer

Connected OBD2 scanner and got a code: P1320 - 2000 Mercury Villager

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 6,826 Answers

Primary ignition failure,look at the power to the coils.If this was at all helpful,please rate,thank you.

Posted on Aug 21, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power obd2 port 2003 ford escape


try another scanner your car may have a different mode in its ecu.

Mar 27, 2013 | 2003 Ford Escape

1 Answer

Misfire code p1320


Here is the definition. The most common cause is a faulty coil.

P1320 NISSAN Description The ignition signal from the Engine Control Module (ECM) is sent to and amplified by the power transistor. The power transistor turns on and off the ignition coil primary circuit. This on-off operation induces the proper high voltage in the coil secondary circuit.
Read more: http://engine-codes.com/p1320_nissan.html#ixzz23vOHwQBO

Aug 18, 2012 | 1998 Nissan Maxima

1 Answer

CODE P1320 ON 2001 NISSAN SENTRA


check engine light on means some fault codes stored in your engine control module.
use this tool clear the fault code p1320.

Jun 04, 2012 | 2001 Nissan Sentra

2 Answers

2001 NISSAN SENTRA 1.8 CODE P1320


use a code scanner tool to clear the p1320, it's cheap and easy.

Jun 04, 2012 | Cars & Trucks

1 Answer

Replaced the O2 sensor unit and the ECM(programs installed) but I'm still getting CHECK ENGINE LIGHT(P0001). what is the possible problem and how can this be resolved?


P0001 Fuel Volume Regulator Control Circuit/Open The above code is about an oxygen sensor code for the heater circuit located in bank 1 sensor 1. (bank 1 is at exhaust manifold by the #1 cylinder head, bank 2 is on the 2nd cylinder head. On some engines, both exhaust manifolds could have one oxygen sensor each side and the 2nd cylinder head will have the sensor 2). On the oxygen sensor itself, it has 4 wires which are color coded. Two of wires are for the heater circuit that heats the oxygen sensor to make it reach optimum operation quickly. Those 2 oxygen sensor heater wires could be shorted between the sensor and the ecm (engine computer) or other engine components.
oxygen%20sensor%20heater%20copy.jpgThe common fix for this code is to check the integrity of the heater wires. Check the wires for insulation and routing which could be loose or touching a hot exhaust that can short the wires. If the engine has too many miles, it is possible that the heater circuit inside is worn and shorted which needs a replacement of the oxygen sensor. If you have a DVOM, you can also test the continuity of the heater wires from the oxygen sensor to your computer pins.
More detailed fixes will be provided as soon as you give the symptoms of the obd2 trouble code. ATS will provide the wiring diagram so you can trace the color coded wires. Use an obd2 code reader or scanner so you can access this obd2 trouble code. When you have this obd2 code list, use it as a reference and give the code to ATS. We will then send you all the possible fixes for the obd2 trouble code. ATS has lots of fixes for obd2 gm codes, obd2 ford codes, dodge obd2 codes and all obd2 import codes such as Toyota obd2 codes, Honda obd2 codes, Nissan obd2 codes, etc. All fixes for this obd2 codes are guaranteed or your money back.
Important TIPS about Oxygen sensor:
The oxygen sensor content of the exhaust gas indicates when the engine mixture is operating lean or rich. When the oxygen sensor detects that the engine is operating rich, the signal voltage is high, and any decreases in the signal voltage means the engine running is lean. The engine computer supplies a reference voltage like one volt or five volts, and then shows the change in the sensor return voltage as the sensor's resistance is changing. If you have connected everything properly, when you crank the engine, you should see the check engine light coming out.
Unheated oxygen sensors rely on the heat of the exhaust gases to reach the working temperature, therefore they might start to cool down while the engine is idling and revert back to a default air-fuel ratio setting. This type of sensor usually has a single wire connector, though others have two. Unlike the fuel pump relay, the 02 sensor heater circuits have a separate fuse for each sensor and grounds, which are controlled by the engine computer.
To read a voltage across the heater, one side must be connected to (+) and one side must be connected to (-), which is accomplished by the computer or a transistor. It can read 12V between each wire and a separate ground if it was connected to positive and the other was not yet connected to ground connection (for details, please contact ATS).after you replace oxygen sensor you have to drive for so many miles before it resets its sef

Dec 13, 2010 | 2001 Volkswagen Beetle

1 Answer

I need to troubleshoot dtc p0325 & p1320 on a 1997 Nissan Maxima GXE?


Hi,

The two codes seem to be related. The P0325 description is knock sensor circuit malfunction and the P1320 is ignition signal - circuit malfunction.

I'll summarize and then give links on more detailed articles I found. Basically the P0325 refers to the knock sensor and associated wiring. The P1320 refers to the ignition coil and wiring. Check the sensor, coil, and associated wiring.

I found some great articles:
P0325 - http://www.obd-codes.com/p0325
P1320 - http://autorepair.about.com/library/a/1i/bl039i.htm

Good luck!

Oct 19, 2008 | 1997 Nissan Maxima

Not finding what you are looking for?
2000 Mercury Villager Logo

Related Topics:

658 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

fordexpert

Level 3 Expert

5470 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...