What does PO117 code mean. - Tribute Mazda Cars & Trucks

usually replacing the engine temperature sensor fixes that code. Check the wire for voltage with the key on. No voltage, fix that wire first.

PO117 refers to the coolant sensor. This should not cause the vehicle to not start/click. Make sure battery is fully charged. Maybe even try a boost. If the starter just clicks when the key is turned it may be getting bad. You can try tapping on the starter motor with a blunt object while holding the key in the crank position to see if it may start

http://www.obd-codes.com/p0117
http://www.obd-codes.com/p0122

Probably a faulty temp sensor....

EOBD II Error Code: P0117
Fault Location:
Engine Coolant Temperature (ECT) Sensor (G62) - Low Input
Possible Cause:
Malfunction Indicator Lamp (MIL) Triggered on first occurrence.
Coolant thermostat.
Wiring short to earth.
Engine coolant temperature (ECT) sensor.

EOBD II Error Code: P0340
Fault Location:
Camshaft Position (CMP) Sensor A (G40), Bank 1 - Circuit Malfunction
Possible Cause:
Malfunction Indicator Lamp (MIL) active.
Wiring from/to Camshaft Position Sensor (CMP) faulty.
Camshaft position (CMP) sensor faulty.
Timing misaligned.
Possible Solutions:
Check Wiring from/to Camshaft Position Sensor.
Check Camshaft Position Sensor.
Check Timing.

EOBD II Error Code: P0500
Fault Location:
Vehicle Speed Sensor (VSS) - Circuit Malfunction
Possible Cause:
Malfunction Indicator Lamp (MIL) Non Emission Fault - No warning light.
Wiring.
Vehicle speed sensor (VSS).
Engine control module (ECM).

The code means there is a problem with the coolant temp sensor, or the thermostat. The sensor is telling the computer the coolant is cold.

here r your trouble code meanings:
1) p0123-throttle position sensor circuit, high input.
2)p0117-engine coolant temperature circuit, low input.
3)p0118-engine coolant temperature ciurcuit , high input.

PO117 - Engine Coolant Temperature Circuit Low Input
PO325 - Knock Sensor 1 Circuit Malfunction (Bank 1 or Single Sensor)

Do you have a coolant leak?

you have a problem with temp. sensor. i would
purchase a new one and replace it