Question about 1995 Jeep Grand Cherokee
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Most serious item I see is oil pressure. Put a mechanical gauge on the engine and get an accurate reading. Also make sure that the passage to the sender isn't blocked. If you did the pump yourself, did you find any coolant in the oil? In 99% of all low oil pressure situations, the oil pump has not failed. Rather, either a cam bearing or crank/rod bearing is worn. You do not have to have one spun or completely worn out bearing. Even wear of all bearings that is somewhat excessive can bleed off enough pressure to cause problems (plastigage the engine bearings to determine wear).
As far as coolant loss. A cylinder head gasket can fail between cylinders, into a water passage, into an oil passage or any combination of those and externally as well. The cylinder heads on engines beginning in about '98 are prone to "micro-cracking" which can lead to all kinds of hard to diagnose coolant loss problems. It may help if you have a shop do a dye test and a hydrocarbon test on the cooling system and see what they find.
I have seen several kinds of block sealing systems available. Though I generally do not recommend them, as the longevity of the repair isn't predictable, you could try that as a option of last resort.
There is no quick easy solution to your problem but with a bit of "poking around" you may be able to cure it. Don't bother repairing one problem before finding out what the other one is first though as together, it might be smarter to replace the engine.
Posted on May 09, 2010
Replace it immediately the leak will only get worse. On some, you may need a sending unit socket, unless it has flat sides that will work with a wrench. Wrap the thread with teflon tape (one turn) to prevent it from leaking there and do not over-tighten or it will snap off.
Posted on Jul 05, 2010
Tips for a great answer:
Dec 30, 2011 | Jeep Grand Cherokee Cars & Trucks
Feb 05, 2011 | 2000 Jeep Grand Cherokee
Jan 08, 2011 | 2003 Jeep Grand Cherokee
Nov 05, 2010 | 2005 Jeep Grand Cherokee
Sep 20, 2010 | 1996 Jeep Grand Cherokee
Jun 30, 2010 | 2001 Jeep Grand Cherokee
Jun 09, 2010 | 2000 Jeep Grand Cherokee
Apr 14, 2010 | 1997 Jeep Grand Cherokee
Jul 28, 2009 | 2000 Jeep Grand Cherokee
May 25, 2017 | 1995 Jeep Grand Cherokee
290 people viewed this question
Usually answered in minutes!