Question about 1986 Oldsmobile Cutlass Supreme

Open Question

Driver seat does work on 1986 cutlass supreme. you car hear clicking sound when you move the seat switch. Wires seem to be good

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 321 Answers

SOURCE: 1995 cutlass supreme transmission

It physically will fit and bolt up,but there are many different ratio,and drive and driven sprocket tooth counts,different final drive ratios,all monitored by the computer with electronic speed sensors.If the trans from the 95 has a different ratio than the 93,the computer will set gear ratio error codes,and possibly put the trans in a failsafe mode,stuck in 2nd or 3rd gear.On the transmission case,down by where the passenger side axle would go in,is a thin metallic tag,maybe 2"x 3",and it has bar codes,and also a series of numbers and letters.The numbers and letters,large cap,are the final drive gear ratio code.They should match on the two transmissions in question.

Posted on Jul 31, 2008

  • 14 Answers

SOURCE: 1994 oldsmobile cutlass supreme will not flashes

Sounds like a RFID issue. Your key most likely has a chip inside of it. Most of the time people will have multiple keys on their key chain that can cause interference with the receiver in your steering column. Try using the one ignition key to start.

Posted on Jan 10, 2009

  • 410 Answers

SOURCE: I need to replace turn signal switch on 97 olds cutlass supreme.

Disconnect the battery to do any service on the steering column or front radiator areas.

Posted on Jun 30, 2009

  • 14036 Answers

SOURCE: fuel tank size 1986 cutlass supreme brougham


Posted on Sep 11, 2009

  • 2002 Answers

SOURCE: need to change fuel filter on 1986 cutlass supreme

You'll find it in the carburator. Unhook the fuel feed line from the front of the carb and undo the large nut directly where the fuel line connects to. The filter is there.Pay attention to how the filter comes out and put the new one back in the same way. Hope this helps.

Posted on Mar 22, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I don't know where to plug in the flasher relay for my turning lights

1986 Oldsmobile Cutlass 5.0L 4BL OHV 8cyl to find the FLASHER...

The Flasher is located: Front seating area, driver side, under dash, passenger side of steering column, mounted behind instrument cluster.

Hope helps.

Mar 11, 2011 | 1986 Oldsmobile Cutlass Supreme

1 Answer

My rear defrost on my 1986 cutlass supreme is not working. i checked all the fuses and they are all working.

there is a repair kit at the parts store for these "broken lines" in the window - around $11.00 - either you you have a broken wires in the glass or wires leading the power into it,. check the power at the terminal connection along side the window first to be sure..
Best regards

Mar 06, 2011 | 1986 Oldsmobile Cutlass Supreme

1 Answer

Were do I connect the wires for power seats for the driver seat on a 1986 class

There will be a small wiring harness coming through the carpet under the seat. Once you find it it should be evident how it connects to the seat motor, also under the seat. Please rate this answer, thanks.

Feb 05, 2011 | 1986 Oldsmobile Cutlass Supreme

1 Answer

Where is the fuel filter on the 1986 cutlass supreme? What can I do to theft proof my 1986 cutlass?

Filter is in-line and located between the intake manifold and the fire wall. To make your car theft proof simply wire in a kill swich between the battery and the ignition switch and locate that kill switch in a place that no one can find except you.

Oct 22, 2010 | 1986 Oldsmobile Cutlass Supreme

2 Answers

My ingnition lock is stuck in the on position and i cant move it back the car wont shut off because of it how do i fix it. Its a 1986 olds cutlass

Sorry to say the tumblers in your ignition lock cylinder are jambed causing the key to be stuck in it. A new lock cylinder is the only fix for this. Any major auto parts store sells the lock or any GM Dealership Parts Department can get you one also

Mar 30, 2010 | 1986 Oldsmobile Cutlass Supreme

1 Answer

91 cutlass supreme. drivers side window will not

Check for broken wires in the rubber boot in the door jam.. Iv'e found so many break from the wires bending back and forth from the door opening and closing..the circut uses more than two wires for up and down operations of the motor .and they always seem to be broken. good luck

Nov 05, 2009 | 1991 Oldsmobile Cutlass Supreme

1 Answer

86 cutlass supreme

Possibly the nuetral safety switch for the transmission. Try putting the car in nuetral and see if it will start.

Oct 13, 2009 | 1986 Oldsmobile Cutlass Supreme

1 Answer

Power window not working

it sounds by the motor clicking that your power window motor is shot.....If you jump 12 volts to the terminals on the motor does it work?.................if it does you can at least get it up.......if you put the power to it and it goes down reverse the wires on the terminals and it will go up.But it sounds to me like you need a new one.
hope this helps!..............Good luck!

Jan 11, 2009 | 1996 Oldsmobile Cutlass Supreme Coupe

2 Answers

Car will not start

i am having same issue with a 1994 oldsmobile cultlass supreme and i was told bye 4 different ase mechanic that the ignition swith in steering column is bad.the wires are hair fine and when you start the car the wires turn breaking them.i am going to replace the ones in my daughters car and pray for the

Jan 05, 2009 | 1995 Oldsmobile Cutlass Supreme

3 Answers

1986 cutlass supreme brougham

my signal lights (all 4) quit working, hazards still work, changed relay for hazards, didn't fix problem. checked bulbs, all good??? anyone have an idea

May 20, 2008 | 1986 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides