Question about 1999 Isuzu Rodeo

2 Answers

1998 Isuzu Rodeo 6V, My Gas Guage does not work...what do I need to do?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Hello i had the same issue my gas gauge did not work and i had a bad fuel pump ,i ended up replacing my pump and realized the pump has 2 units attached to it one is the sending unit for the gas and the other the gauge level ,i encountered an issue when i swapped out the old pump for my new pump the gauge did not work any more after replacing,so i investigated after ruling out any wiring defect ,i made sure the pump was properly connected in its self the pump has a connector between the sending unit and the gauge level, and after that i realized the bcm, ECM, or vcm how ever its called (the computer) for my vehicle needed to be re-flashed completely for it to see the new pump... i never would have thought the main computer could not end up just detecting it automatically, all 98 and 99 must under go a re-flashing when any fuel pump is disconnected and replaced... hope that helped...

Posted on Sep 18, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Can it be re-flashed by owner?

Posted on Dec 09, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gas guage doen't work


HI,
It's probably WATER coming out of the exhaust as that's the result of the engine running...not a problem.

Gas gauge is separate from the pump....usually. It could be a fuse (look in the Owner's Manual for fuse location) or the fuel 'sender' which is what measures the fuel level. This is usually IN the fuel tank. Sorry I don't know where it is on your Rodeo..

Search online - Google it - for fuel sender. Remember, your Rodeo is the same as the Honda Passport for the '94-2002 model years so search under the Passport too.

GL,
TD

Mar 14, 2014 | 2000 Isuzu Rodeo

1 Answer

My gas guage is not working right. Ifill it up all the way and it reads full then about a at 3/4 of a tank it goes straight to empty. And when Istart my vehcile my speedometer goes to 30 mph. I can't...


The gastank has a float that overtime gets eaten up by gas so it will take on gas n not float all the way to the top to replace it u have to remove the gastank and the spedo gear or cable could be broken

Jul 14, 2011 | 1998 Isuzu Rodeo

2 Answers

I wanted to know how much gas wil an isuzu rodeo gas tank hold


Not sure what year model you have - but a 2000 Isuzu Rodeo holds 21.1G (79.9L)

May 27, 2011 | Isuzu Rodeo Cars & Trucks

1 Answer

DIAGRAMA DE CORREA DE ACESORIO ISUZU RODEO 98 3.2 6V


zjlimited_91.jpg

Fig. Accessory serpentine belt routing-3.2L engines (click for zoom)



I hope this helps, remember to rate and comment this answer; good luck.

Nov 17, 2010 | 1998 Isuzu Rodeo

2 Answers

Why my 199 isuzu rodeo gas guage shows blink all time eventhough it is gas tank is full


most common is the tank sender fails. disconnect it and check for dash indication to go away, if it does, replace sending unit.

Sep 12, 2010 | 1999 Isuzu Rodeo

1 Answer

2000 Isuzu Rodeo - the fuel light comes on but it is full of gas - is the sendding unit bad or what might be the problem


yes the fuel sending unit will need replacing, faulty fuel sender unit will give the guage inaccurate reading.

Nov 02, 2009 | 2000 Isuzu Rodeo

3 Answers

How to drain gas tank on a 1999 isuzu troope


only way to drain your tank is to take it down and empty it by the main tube or where the fuel pump is at
good luck

Aug 22, 2009 | 1999 Isuzu Trooper

1 Answer

Need link to 1998 isuzu rodeo relay/fuse diagram


http://www.bulldogsecurity.com/New%20Wires/New%20Wires/Wires/isurodeo96-03.htm
http://images.google.com/images?q=1998+isuzu+rodeo+electrical+diagrams&oe=utf-8&rls=org.mozilla:en-US:official&client=firefox-a&um=1&ie=UTF-8&ei=5h6gSbHpEYKEsAPjwIDHCQ&sa=X&oi=image_result_group&resnum=1&ct=title
HEre are two different links hope they work for you

Feb 21, 2009 | 1998 Isuzu Rodeo

Not finding what you are looking for?
1999 Isuzu Rodeo Logo

804 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...