Question about 2005 Dodge Neon

1 Answer

05 neon windshield washer tank is full but not spraying fluid. I assume the pump is shot. Any advice on replacing the motor/pump. I would like to do this myself if not to involved.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,793 Answers

Its a simple job but first buy the pump and you will see where the bolts/screws go then you will be able to remove same on car and fit new.before buying though,try removing a hose from the pump and get someone to operate the switch,might just be s..t in the pipe.

Posted on Aug 20, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

In my 2007 Saturn Vue there is what I think is an air pump which is cracked that one port is not connected to anything.


There is a electric motor that pumps washer fluid . Located in the bottom of the washer fluid tank .
Wash Operation (Front and Rear Wipers)
The front and rear washer systems use the same windshield washer fluid pump. When either the front or rear wiper is in the washer position voltage will be supplied to one side of the windshield washer fluid pump (depending on whether it is front or rear), while the other side of the pump is grounded.
At this point, the windshield washer fluid pump sprays solvent onto the windshield. When the front or rear washer is activated, the BCM receives an input from the switch that is activated. The BCM will control the wipers while in the WASH mode. The BCM will control either the front wiper relay or the rear wiper relay to turn on the wipers. The windshield wipers operate at low speed for 3 swipes and returns to the park position.

When turning on the washers do you hear the motor run ? Have some one try it while you listen at the washer fluid tank ! These pump motors do go bad .
turn OFF the ignition.
Disconnect the harness electrical connector of the windshield washer fluid pump.
Connect a test lamp from the windshield washer pump control circuit to a good ground .
Turn ON the ignition, with the engine OFF.
Press the front washer switch.
Does the test lamp illuminate?
YES or NO !

Nov 18, 2016 | Saturn Cars & Trucks

2 Answers

Washer fluid not spraying


the tube might be disonnected from the fluid tank.

Feb 18, 2015 | 2008 Ford Edge

2 Answers

Windshield washer fluid quit working on my 2011 Freightliner Cascadia


There's a few things you might want to check. First, check to make sure the washer fluid reservoir is completely (assuming you hadn't already done that). After you are certain the reservoir is full, look for any possible leaks...either the reservoir or the hoses going from the tank to the windshield. If the tank and hoses are intact, turn on your windshield wipers...then try running the pump. If no washer fluid comes out, and for this you might need another person to assist you, try running the pump again...listening to make sure the pump is in fact running. If the pump does run but still no fluid comes out, inspect all of the hoses as well as all of the outlets where the fluid sprays the windshield...it is possible that the outlets may be plugged. Some common reasons for the outlets to be plugged...debris, dirt/mud, and/or wax (has anyone recently waxed your Freightliner?). Just to be sure, using a small needle or even a wire, ensure each outlet is cleared and not obstructed with anything. After that, try running the pump again. If no luck, try removing the hoses going from the tank to the windshield. Once removed, using something like a wire coat hanger, clear each hose for any possible obstruction. Reattach hoses and try running pump again. If still no luck, I would guess the problem might be located with the washer pump itself. Before opting to replace the pump, if you believe that is the problem and the pump just doesn't operate, check all fuses and inspect any/all wiring connections.

Good luck
Jason

Jun 24, 2014 | Cars & Trucks

1 Answer

Windshield washer stopped working in 2005 chrysler 300 limited


Can you hear the (washer) motor run? Have someone hit the squirters with the key on and out your ear to the filler tube to see if you can hear the pump running. If yes, common for the impeller to spin off the shaft of the motor. I have found that the replacements at the auto stores work rather well. Something of a pain to remove the tank though!

Mar 02, 2014 | 2005 Chrysler 300

2 Answers

My windshield wiper motor works, but washer does not work/


I would start by checking fuses. If you've checked already, then the windshield washer pump has probably gone bad. The wiper motor and washer pump should be separate units. Typically the washer pump is located in the base of the washer fluid reservoir.

Dec 19, 2013 | 2005 Dodge Neon SXT

1 Answer

1997 Chevrolet camaro windshield sprayers won't


I would check the washer pump to see if it is working assuming the tank is full of fluid.

Aug 24, 2012 | Cars & Trucks

1 Answer

1997 Ford Ranger windshield washer will not spray. Fuse good, fluid full, wipers operate normally. outlets clear.


Pump running? You can take it out and see if it will run with 12 volts or you can apply 12 volts directly to the motor if you unplug the wires. If the pump will not run ... no spray. Get a new pump at any full service Auto Parts place. Is it possible you have water in the tank and the motor is currently stuck due to frozen water?

Feb 12, 2010 | Ford Ranger Cars & Trucks

2 Answers

1998 Grand Prix GTP windshield washer (full) not pumping fluid


Yes it's easy to do, remove tank pull pump off of tank, and replace pump, Napa has this pump # 6651533 it runs between $14.00 and $20.00 .

Jan 04, 2010 | 1998 Pontiac Grand Prix

3 Answers

When i go to use the windshield wipers the wipers move but the fluid which is full doesn't come out.


follow the windshield spray nasal water lie to the pump making sure the line is not broken, next do you hear the pump running when you spay the fluid, if not that the pump is faulty, if you do hear the pump running, more likely the windshield spray nasal is clog with debris; to unclog it try to use a clothes needle, poke around in it to see if you can clear the blockage, if not, replace will be the best idea, fairly cheap and easy to replace. those windshield tank and the pump does not have good filter on them and they tend to get clog up in the pump or the spray nasal.

Oct 14, 2009 | 1999 Chevrolet Venture

Not finding what you are looking for?
2005 Dodge Neon Logo

584 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...