Question about 2004 BMW Z4

1 Answer

Vehicle won't turn over to start - 2004 BMW Z4

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Vehiclw won't turn over to start

Posted on Sep 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Starter problems with my starter on a bmw x5. replaced starter and now all I hear is a whine from the starter, but vehicle won't turnover. what could be the problem.


sounds like the bendex in the starter is not kicking in take it to a local auto electrician and get him to check it out

Feb 27, 2013 | 2001 BMW X5 4.4

1 Answer

2000 chev st v6 vortec pu 4x4 won't start seems to have fuel and stater turning over put new coil still won't start


Who is doing the work on or testing of your vehicle?

What has been done so far,how & the test results?

Dec 10, 2012 | Chevrolet Blazer Cars & Trucks

1 Answer

Our 2010 Taurus is keyless and won't turn over to start. Lights come on but wont turn over. WHat's the problem?


I'm assuming that this vehicle is a push to start, correct? Do you need to press the foot brake to start the vehicle? Is the vehicle in Park or neutral?
If all of this is working properly, check the fuses under the hood and in the passenger compartment, to the left of the steering column, lower dash.

Sep 09, 2012 | Ford Taurus Cars & Trucks

1 Answer

Ran out of diesel now vehicle won't start


This is not unusual on a diesel. What happens is there is air in the system. If this vehicle has an electric fuel pump loosen line where fuel enters injection pump then turn ignition key to the on position and watch for fuel to appear and then quickly tighten line before turning off key. Then try to start. If does not have electric fuel pump will need a second person. One will loosen line and watch while other cranks vehicle until you get fuel and tighten line before the other person releases ignition switch unless vehicle starts first. If that doesn't do the job do this where line hooks onto each injector. Probably will not have to do this to all injectors but could run rough until all the air gets out of everything. I have farmed with diesel tractor for 25 years and dad I drove the gm vehicles with the 5.7. You normally don't start a diesel without bleeding the air out of the lines although some will self bleed most won't. Hope this does the trick.

Jun 21, 2012 | 2004 GMC Sierra 2500

1 Answer

03 trail blazer won't start turn key nothing let set over night will start then shut off and won't start again just put new battery in still doing it some times it will run for a week then do it...


This might be due to a failing antitheft system. Very common on GM vehicles. This link explains. http://vatspasslockpasskeysecurityhelp.yolasite.com/

Sep 06, 2011 | 2003 Chevrolet TrailBlazer

1 Answer

Replaced stock bcm with used. Was reprogramming with the method of turning key to start position (vehicle won't start) then leaving it in the on postition for approx 10 minutes until the theft lock...


A used body control can be used in a vehicle other than the vehicle it was installed in. the body control module when first installed is programmed with the vehicle vin number. the vin number can not be changed was it was written to the BCM. the oprions can be always change in the BCM but not the VIN number. basically the used bcm you have installed has the vin number from the vehicle was installed in, now the vin number in the used BCM doesnt match all the other control modules

Jun 07, 2011 | Chevrolet Equinox Cars & Trucks

2 Answers

Chevy blazer wont start 2002


if it turns over there are a cocuple of things to check. crankshaft sensor and the coil pack maybe the computer.id start with the crankshaft sensor

Jun 29, 2008 | 2002 Chevrolet Blazer

Not finding what you are looking for?
2004 BMW Z4 Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...