Question about 2000 Mitsubishi Galant

1 Answer

Witch type of engine coolant.do i need for Mitsubishi Galant v6?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,793 Answers

If you do a complete flush of the system use what you like.but the non ethylene glycol type is better for the planet......

Posted on Aug 20, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Firing order on galant 2000 v6 3.0 engine and distributer


Check this for 2000 Mitsubishi Galant 3.0 liter SOHC V-6...


10_4_2011_3_56_04_pm.gif

Remember to rating this free answer.

Sep 16, 2011 | 2000 Mitsubishi Galant

1 Answer

My service engine soon light came on displayin po170. i have a mitsubishi galant 2000. how do i fix this problem


PO170 is a fuel trim malufunction. On a V6 this applies to the rear cylinder head. Lots of possibilities as fu"el trim" refers to the volume air flow sensor, fuel injector, fuel pressure, engine coolant senor, air intake sensor, barometric pressure sensor, oxygen sensor, intake air leaks, or cracks in the exhaust manifold

Mar 03, 2010 | 2000 Mitsubishi Galant

1 Answer

Change the thermostat in the galant.


1. Raise the front of your Mitsubishi Galant with a jack and lower onto jack stands, or use wheel ramps. Disconnect the negative cable from the battery. Drain the coolant into a suitable container by opening the drain plug on the bottom of the radiator.
2. Step 2 Follow the upper radiator hose to where it meets the engine at the thermostat housing. Loosen the clamp at the engine end of the radiator hose and pull the hose off the thermostat housing.
3. Step 3 Remove the two bolts on the thermostat housing cover and pull off the cover. Note the position of the old thermostat and remove it from the thermostat housing. Place a rag in the thermostat housing and scrape any gasket residue from the inside of the thermostat housing cover.
4. Step 4 Take out the rag and insert the new thermostat in the same position as the old one, with the spring-side facing into the engine. Install the new gasket or o-ring, depending on the type of thermostat you are installing. Note that most late 1980s and early 1990s Galant models use a thermostat gasket.
5. Step 5 Replace the thermostat housing cover and tighten the bolts. Re-attach the radiator hose and tighten the clamp. Fill the radiator with new coolant, or use the coolant drained from your Galant earlier if it's relatively new and clean.
6. Step 6 Start your Mitsubishi Galant and run with the heater on high until it reaches operating temperature. Make sure the heater is blowing warm air to ensure the thermostat is working properly. Check for leaks and tighten the radiator hose clamps if you detect any.

Oct 25, 2009 | 2000 Mitsubishi Galant

1 Answer

2000 Galant 3.0 V6 won't idle when warm


that weired they normaly die when the air con turnes on ummmmmmmmmmmmmm check the air filter

May 22, 2009 | 2000 Mitsubishi Galant

1 Answer

Water pump chang on mitsubishi Galant 2.5 V6


Waterpump replacement requires removal and replacement of your timing belt. Because of this it is not your typical do it yourself repair. Engine timing is critical, and not having your belt set correctly can lead to catastrophic engine damage.

You can purchase a service manual at your local parts store to get an idea of what is involved, however this being an interference engine you should leave this job to a professional if you are uncertain enough about your abilities that you need to ask for help on it. The cost to replace the waterpump is far far less than the cost to repair a engine that had an incorrectly set timing belt.

Mar 13, 2009 | 2000 Mitsubishi Galant

2 Answers

MITSUBISHI GALANT


may be it is the engine that good condition...

Jul 14, 2008 | 1994 Mitsubishi Galant

Not finding what you are looking for?
2000 Mitsubishi Galant Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...