Question about 1997 Lexus ES 300

Open Question

How to install hood struts on lexus es 300 - 1997 Lexus ES 300

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 36 Answers

SOURCE: 92 lexus es300 knock sensor

Need to remove the upper and lower air intake manifold.  There are two knock sensors for the front and rear pistons banks.  If you plan to do this yourself it is about 1 to 2 hours.  While you are at it, there is a short coolant bypass hose sitting in the same spot, replace it.  Another problem with the knock sensor is the wire harness used to connect the two knock sensors into one connection sometimes wears out and contacts the metal on the engine causing false signals to the ECM, so replace this cable also.
Just did this last summer on my 99 ES300.  Pretty easy.
DIYr

Posted on Mar 16, 2009

Ad
  • 1 Answer

SOURCE: noise front and rear struts

I had the same problem - you need to replace the strut mounds - there was a recall on the mounds for the same problem.... my noice was very very bad - and once I did that it was all over, talk about a happy person...
good luck

Posted on Mar 31, 2009

bunnydawg
  • 5158 Answers

SOURCE: How many O2 sensors on a 1997 Lexus ES 300?

according to the manual i have... it has three.... one in the exhaust manifold.... and two in the exhaust pipe..... slightly vauge on the exact location of the last two sensors... but looks like it is after the catylitic converter.

Posted on Apr 15, 2009

  • 1 Answer

SOURCE: car keys locked in trunk of 1999 lexus es 300

1. I presume your button on the dash (which opens the trunk) is not working. You could take that button out of the dash panel and manually activate the circuit by using the wires themselves.
2. If the "valet" key doesn't fit the trunk lock, see if the keys are visible through the center back seat access 'hole', make a wire hook attached to a broom handle, etc. and try to catch the ring the key is on. If the view is blocked by other things you can't move, figure out at way to move things in the trunk so you can get something to reach the key(s). Do you have other metal keys on the same keyring? If so, use a magnet to grab the whole set.
3. Have you considered taking out the rear seat? Do the bottom seat cushion first, then the back.
4. By now you have hopefully already gotten your keys back out of the trunk, but if not I hope one of these suggestions works. MW

Posted on May 12, 2009

c17hydro
  • 2984 Answers

SOURCE: location of fuel filter on 2000 lexus es 300

The fuel filter on the ES300 is located under the hood, on the driver's side, by the fenderwell.

Posted on Jul 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Had struts put on my 1999 ES 300 Lexus, now my TRAC & ABS STAYS ON, WHAT'S making them stay on?


Those systems are controlled with sensors on the wheels. One may not be lined up well enough to sense the speed of the tire or the mechanic broke one and didn't tell anybody.

Jan 22, 2014 | 1999 Lexus ES 300

1 Answer

When can you expect to have strut problems? Looking at a 1999 Lexus ES 300 (121,000 mi.) and am trying to determine if it has a strut problem. Also, what would be the cost for replacement?


Odds are, at 120000+ miles, it could well stand some new struts.

A Monroe "Quick Strut" will probably run in the neighborhood of 225.00 / each. Be sure to replace both....don't do just 1.

Labor to install probably around $300 and don't forget alignment @ around $80.

All together,(parts, labor, alignment, etc.) you could be looking at $830.

To save money, you could possibly get just a replacement cartridge, rather than a complete new strut (spring and all) for around $75 each, but may incur a elevated labor due to having to dis-assemble / re-assemble the strut assembly.

Jan 22, 2011 | 1999 Lexus ES 300

1 Answer

How do I change the thermostat on a 1994 LEXUS ES 300


On 1994 Lexus ES300 3.0L MFI DOHC 6cyl the Thermostat is located under hood, passenger side, upper engine area, engine end of upper radiator hose, mounted in coolant outlet housing, you need to take off this componentes to access this.

Hope helps.

Nov 22, 2010 | 1994 Lexus Es 300

1 Answer

I have a 2001 es 300 lexus and the radio wont work at all.. Wheres the fuse box?


mcdevito75 here, I believe it"s under the hood a s you look on the engine the fuse box will be on the right side by the inner fender., Best Bet Check with any local auto parts store for it"s location.

May 21, 2010 | 1992 Lexus Es 300

1 Answer

What is the spark plug gap for 2000 lexus Es 300


if im not mistaken it should be 35 thousants to be sure you can check the little white tab under the hood it should be on the shroud on top of the radiator or directly under the hood on the trim. it will tell you the gap as well as the engine size and timing.

May 07, 2010 | 2000 Lexus ES 300

1 Answer

I'm in the process of replacing the front struts on my wife's 2000 Lexus ES300. I'm looking for torque values for the three nuts at the top of the strut tower and for the two down the bottom of the strut....


  1. Install or connect the following:
    • Spring seat. Tighten the new upper strut retaining nut to 36 ft. lbs. (49 Nm).
  2. Remove the strut from the vise and disassemble the securing nuts and bolt.
  3. Rotate the upper support so the lowest bolt on the support aligns with the projection part of the lower spring.
  1. Install or connect the following:
  2. Strut and tighten the strut to body bolts to 59 ft. lbs. (80 Nm).
  • Strut to the steering knuckle and tighten the bolts to 156 ft. lbs. (211 Nm).
To install:
  1. Install the lower ball joint onto the steering knuckle and tighten nut to 90 ft. lbs. (123 Nm). Install new cotter pin.

Oct 30, 2009 | 2000 Lexus ES 300

2 Answers

1996 Lexus ES 300---- Electrical Problems


if all fuses good under hood and inside they have big problems with the ignition switch,,,,the electrical part

Sep 04, 2009 | 1996 Lexus ES 300

1 Answer

Location of fuel filter on 2000 lexus es 300


The fuel filter on the ES300 is located under the hood, on the driver's side, by the fenderwell.

Jul 12, 2009 | 2000 Lexus ES 300

1 Answer

Where is the Fuel Filter located on a ES300 2002?


Hi, The fuel filter is located under hood drivers side, mounted to side of strut tower.

Dec 03, 2008 | 2002 Lexus ES 300

Not finding what you are looking for?
1997 Lexus ES 300 Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

905 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...