Question about Chevrolet Suburban 2500

1 Answer

Not entirely sure it's the fuel sensor, but my '94 chevy suburban will stall when the fuel gauge reaches about halfway. No fuel leakage is detected but it will fail to start after the gauge reaches half empty. My question is; will a faulty fuel sensor really stall a vehicle?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,309 Answers

No the sensor wont but i suspect a problem in the fuel delivery lines in the tank, either loose or cracked line allowing air into the fuel, easiest way to check is to replace the fuel line with a short piece of clear line and check for bubbles in the fuel

Posted on Aug 20, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 chevy suburban stalled and won't start now


Check that you are getting fuel. It sounds like the fuel pump is bad.

Dec 23, 2013 | 2002 Chevrolet Suburban

1 Answer

Fuel pump in 96 Chevy Blazer replaced by mechanic, gas gauge didn't work after, took back, gas gauge only goes halfway now. What is causing this and what is remedy?


incorrectly and half assed installed. putting a fuel pump in a chevy is very difficult and takes patients. most mechanics dont have that so go to another shop and make sure they fix the problem before you pay.

Oct 18, 2012 | Cars & Trucks

1 Answer

2001 chevy suburban fuel gauge stoped working


If the sending unit was connected and grounded, I would guess the gauge in the cluster is faulty.

Jul 09, 2012 | 2001 Chevrolet Suburban

1 Answer

Smog check time. code says p0452 on 1998 chevy suburban


P0452 That the fuel tank pressure sensor.It sit right on top of the fuel pump module,you dont have to drop the tank,you can reach in there and pop it out and pop it in,just make sure the harness is good and make sure there is no loose clamp from a fuel pump repair,3_28_2012_7_34_53_pm.jpg

Mar 28, 2012 | Cars & Trucks

1 Answer

Fuel gauge not woking on 94 suburban


This problem is caused by a defective fuel level sensor, the sensor is located inside the fuel tank. To replace the sensor you must remove the fuel tank from the truck.

Jul 20, 2011 | 1994 Chevrolet Suburban

1 Answer

1999 Chevy Suburban 5.7 V8 Starts fine will run smooth, but will not take fast throttle. If stomp the gas it will die and pop. It will reach interstate speeds and run smoothly if only minimum throttle...


ok here we go, hook up a feul pressure guage that can be read from inside the car, and check fuel pressure while driving, if the pressure stays fairly constant then the best bet is to hook up a real time scanner with snapshot capabilities ( like snap on or bdm pro) and take it for a drive again, ti could be a sensor reading out of range but not enough to set a code

Sep 14, 2010 | 1999 GMC Suburban

1 Answer

I changed plugs a wires fuel filter an fuel pressure relgator but still dont idle or run right 2001 chevy suburban


Your problem is most likely a sensor problem. Did you get a check engine light? It could also be a fuel pump. These vehicles are verry sensitive to even slightly low fuel pressure. Once the pump starts to get tired they just start running crappy followed by stalling and hard starting. Id start testing cheap stuff first. Like the O2 sensor. If it has been a while or never changed then it needs changed. Should be changed every other year or so to keep it working in tip top shape. cheap O2 sensors may have to be replaced more often like once every year. Next I would look at the MAF sensor. These often get a bit dirty inside and affects the ability for it to detect the proper amount of air. Clean it with a MAF safe cleaner and it just might do the trick.

Aug 22, 2010 | 2001 Chevrolet Suburban

1 Answer

Gas gage fluctuates once it reaches 1/2 tank. 1999 chevy surburban. what is the best fix


I think that the problem mainly lies in the Fuel Sending Unit. Check that its Fuel Level Sensor is all right and is the latest model. I am telling this because if it is not the new one, it can cause corrosion in the sensor and cause shaking and fluctuation of the Gas and Fuel Gauge. I think you can get it.
Thank you Sir, have a nice day.

Sep 25, 2009 | 1999 GMC Suburban

2 Answers

2002 Chevy Suburban: Fuel gauge reads empty, tank is half full


Youre gauge is controlled by a plunger in the fuel tank which is attached to the sensor and the fuel gauge. it sounds like when the plunger goes down half way its either getting stuck down lower then it should. Needs replacing. Any mechanic can do this install for you.

Aug 27, 2009 | 2002 Chevrolet Suburban

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...