Question about Honda Accord
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There are insert in the door that hold the panel on, you can get a tool to help you remove the panel at your local auto parts store. This will help prevent damage. You also have to remove the armrest and once retainers are loosened at the bottom and armrest is remove slide door panel up. No problem but be careful not to damage panel.
Posted on Sep 18, 2009
you must carefully pop off the door plastic clips using a screwdriver and prying gently until they pop out , also remove the screws under any small round plastic screw cover inserts and in the plastic door handle area
Posted on Sep 19, 2009
1st remove the door handle screws or screw that holds the plate up then disconnect any wires to the power switches by removing the units themselves they just pop out grab hold of the bottom and pull out from the bottom the panel it is held in place by plastic clips then lift up and off the door itself and dont forget the lock lever it just pops out as well re-installation is reverse procedure
Posted on Sep 26, 2009
On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you need to pull back the weather seal and then you can access the bolts securing the outer handle
Posted on Nov 05, 2009
Tips for a great answer:
Feb 28, 2015 | 2000 Honda Accord
Jun 19, 2014 | 2000 Honda Accord
Jan 23, 2010 | 2000 Honda Accord
Nov 26, 2009 | 1995 Honda Accord
May 22, 2009 | 1999 Honda Accord
Apr 17, 2009 | 2002 Honda Accord
Apr 15, 2009 | 2002 Honda Accord
May 28, 2008 | Honda Civic Coupe
421 people viewed this question
Usually answered in minutes!