Question about Nissan Stanza
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
thats because the fill point is on the trans you will have to crawl under the vech and look for a plug at the top of the trans remove that plug make sure you add the right fluid check with the dealer for the recommended fluid add the fluid until it runs out the hole let it set for awhile install the plug start the vech run it through the gears and recheck good luck kdc744
Posted on Feb 06, 2009
I don't know if there is a fill plug. I just use the level plug located on driver's side right above the inner CV joint of the half-shaft (axle) to fill it. A piece of flexible tubing connected to a funnel works well. The drain plug is fairly near the center of the bottom of the gearbox housing (behind the bell housing). The level plug has a 24mm, fairly flat, hex head, and the drain plug is a recessed plug with a 3/8" (?) square hole (for a socket handle).
Posted on Apr 23, 2010
the firing order is 1-3-4-2 with #1at the end of the motor were the pulleys are.usually on the distributor cap #1 is marked and i think the distributor rotates clockwise.if you pull the cap and crank the motor over you can see the direction of rotation.then insert the wires accordingly to the order on the cap.
Posted on Apr 10, 2011
Tips for a great answer:
Oct 26, 2013 | 1987 Nissan Stanza
Apr 10, 2011 | 1987 Nissan Stanza
Feb 20, 2011 | 1987 Nissan Stanza
Apr 11, 2010 | 1987 BMW 3 Series
Apr 03, 2010 | 1991 Nissan Stanza
Nov 08, 2009 | 1987 Nissan Stanza
Aug 28, 2009 | 1987 Nissan Stanza
Feb 06, 2009 | 1993 Jeep Grand Cherokee
124 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: