Question about 1991 Ford Ranger Supercab

1 Answer

I have a 1991 ford ranger 2wd. im trying to replace the transmission and on the left side of the tranny theirs a cable or a tube of some sort, i cant get it off. their isent any bolts or clips to remove. any ideas???

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Ford Master
  • 1,075 Answers

I think this is the actual clutch cable you discribe,it will come of at the end that goes to the housing or at the point it attaches to the clutch on box take another look and you will see a nut or a clip on the cable end.adrian,,,,,,,,,

Posted on Aug 20, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1986 ford ranger wont shift into overdrive


could have faulty governor.throttle cable need adjustment.the 83 - 90 models you need to adjust front and rear bands in the transmission.

Apr 06, 2013 | 1986 Ford Ranger 2WD

1 Answer

Need to know what 5 speed transmissions will interchange with a 92 ranger with a 3.0


You didn't mention if it was 2 or 4 wheel drive so I went with a 2 wheel drive. According to hollander the 5 speed transmaaion fits a ranger (2WD) 1991 - 1994 and a Mazda B3000 1994 only. Hope this helps.....

Oct 29, 2012 | 1992 Ford Ranger

1 Answer

I have a 1991 ford ranger xlt 4x4 I went to the ford dealer they put it on there computor they cant find the problem they cant even acsess the comp on my truck idels rough and no overdrive can someone help...


transmission modulator valve is clogged. it will not show up on the computer,but will definately make your truck do what its doing. 88-94 rangers hav had technical service bulletins issued by Ford for this issue. Very easy to replace.

Apr 29, 2010 | 1991 Ford Ranger Supercab

1 Answer

I have a 91 ford explorer 4.0 4x4 automatic transmission and when o put it in park it does not work, i have to use the e-brake to park the explorer...what part do i need to fix in the transmission that...


down at the transmission is an adjustment you can make to hopefully get it bak to park on the left side of the transmission you will find a cable with a nut at the end loosen the nut and move the lever on tranny until it locks into park. if it doesn't work get help from a tranny shop too complicated. and a major job to replace park pin

Jan 05, 2010 | 1991 Ford Explorer

1 Answer

I have a 1987 ford ranger 4x4 and im trying to figure out how to remove the shifter linkage from the tranny to drop the tranny


Hi danielh_04,
There are two different manual transmissions for that year but both processes are about the same. You need to remove the screws from the shifter boot and pull it back to gain access to the top of the transmission through the floor board. You should see a cover with bolts. Remove the bolts and pull the cover off. Then you want to carefully pull up on the shifter. The lever,shim and the bushing should come out. After you get it removed,you can cover the hole with a rag and drop the transmission. Good luck,if you need anything else,let me know,Chuck.

Dec 23, 2009 | 1991 Ford Ranger Supercab

4 Answers

Does the 3.0l transmission fit on the 4.0l engine


Hiya,

There are 5 automatic transmissions used in the Ford Ranger, Explorer and Mountaineer. They may be identified by checking the transmission code on the Safety Standard Certification Label attached to the driver's side door post, in the space marked Trans. The transmissions can also be identified by a tag attached to the lower left hand extension attaching bolt. The transmission codes are as follows:
  • 1991–94 code T is for the A4LD transmission
  • 1995–99 code T is for the 4R44E (2.3L, 2.5L & 3.0L) or 4R55E (4.0L) transmission
  • 1996–99 code U is for the 4R70W (5.0L) transmission
  • 1997–99 code D is for the 5R55E (5-speed automatic) transmission
So, what you need to do now is...establish from a FORD workshop, whether both the A4LD and 4R55E transmissions share the same components and mounting dimensions.

Cheers,

Scott

Nov 12, 2009 | 1992 Ford Ranger

2 Answers

1986 ford ranger 4x4 2.9l leaks transmission fluid as fast as it will go in not leaking from dipstick tube loks like it is coming from around the flywheel


You are leaking at the converter seal on the pump. Many times this a result of a larger problem and as trans needs to be removed to replace it, have converter neck checked for cracks and support bushing in pump checked as well.

Aug 15, 2009 | 1986 Ford Ranger 2WD

1 Answer

1991 ford ranger 2wd 2.9, 4 cyl, manual trans(mazda trans) transmission jumps out of reverse when trying to back up, doesn't feel like it is going completely into reverse.


check the shift lever and make sure it goes all the way into reverse. remember it is all the way on the right and all the way back.

Apr 12, 2009 | 1991 Ford Ranger Supercab

2 Answers

My friend has a 1991 ford ranger ....when he drives it ,,it does want to shift into overdrive ...i told him that he might need to change his tranny fluid and filter...his fluid is brownish ...but the...


Has he changed the fluid? this might be all thats needed also can get some good additives these days to help sticking valves in transmission and not too expensive either (approx £30... $50 ?) which for the sake of this small outlay is worth the risk.

Dec 11, 2008 | 1991 Ford F150

3 Answers

Stuck in 5th gear


try bleeding your clutch

Aug 19, 2008 | 1991 Ford Ranger Supercab

Not finding what you are looking for?
1991 Ford Ranger Supercab Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...