Question about 2000 Chevrolet Suburban

1 Answer

Do i need a special tool to remove the rear wheel bearing on a 2000 chevy suburban # 1500?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chevrolet Master
  • 540 Answers

Yes, after the rear axle is removed you have to use a large slide hammer with a special attachment on the end to get it out and the proper bearing driver to install the new one they are a very tight press fit into the housing

Posted on Aug 20, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix rear wheel bearing on 2002 chevy express van 1500


Remove the rear differential cover. You will see a large pin in the center that has to be removed, spin the diif until you see the bolt that holds it in. The pin should just slide right out. Assuming tires are off. Push the axle towards the center. On the end of the axle is a c clip that has to come out. Magnetic works well for these. Pull the axle out. Remove the bearing. There are special tools to get them out.

Dec 26, 2015 | Cars & Trucks

1 Answer

Rear wheel bearing replacement on a 2001 dodge ram 2wd 1500


Pull the rear axles, remove axle seal. There is a special bearing removal tool that attaches to a slide hammer. Insert tool thru center of bearing and use slide hammer to pull out. Use old bearing against new bearing and tap in with hammer

Mar 08, 2015 | Dodge Cars & Trucks

1 Answer

SPECIAL TOOLS NEEDED TO INSTALL A NEW REAR WHEEL BEARING ON A 2006 CHEVY IMPALA LTZ WITH ABS ?


none really, metric wrenches or sockets, a breaker bar, w jack and jack stands, flat blade screw driver, and a pair of needle nose pliers, to remove the drum holder to get at the wheel bearing assembly.
remove tire then locking washers, remove rotor, using breaker bar, loosen bolt then remove the abs pick up, it is a 10 mm socket, put out of the way, and then remove the bolts, you might have to use a hammer to get wheel bearing to come free from housing.

reverse the procedure to install

Jul 14, 2014 | 2006 Chevrolet Impala

2 Answers

WHAT IF ANY SPECIAL TOOLS ARE NEEDED TO REPLACE A REAR WHEEL BEARING ?


No.
The most you'll need is a big hammer or a air hammer to loosen the bearing from the spindle but just like changing a front bearing

Jul 14, 2014 | 2006 Chevrolet Impala

2 Answers

On my 97" Suburban do


It depends. For a regular 1/2 ton and most 3/4 tons no, just remove the caliper and the rotor comes off over the wheel bearing hub. 1 ton suburbans, require more work, you will require a large socket to remove the axle nut, and a slide hammer or 3 jaw puller big enough to pull off the rotor and wheel bearing as an assembly. The rotor on some 3/4 tons and all 1 tons bolt from behind thru the wheel bearing and need to be removed together. The wheel bearing has to be unbolted from the spindle, then the wheel studs have to be punched thru to remove the rotor. The splines on the wheel studs hold the rotor to the wheel bearing. 1 ton will say 3500 on the side, 2500 for 3/4 ton and 1500 for 1/2 tons.

Jan 31, 2011 | 1997 Chevrolet Suburban

1 Answer

How to replace a Jaguar X Type fron wheel bearing


Jaguar 2000-06

Wheel Bearings
Removal & Installation
  1. Remove the brake disc.
  2. Remove and discard the retaining clip. Detach the ABS sensor.
  3. Remove and discard the O-ring seal.
  4. Remove the wheel hub and bearing retaining bolts.
  5. Remove the wheel hub and bearing.
  6. Prior to applying sealer, clean the ABS sensor sealing surface and the ABS sensor aperture sealing surface.
  7. Install a new O-ring seal.
  8. Apply a 2.5mm bead of Loctite Ultra Blue 587 Silicone (RTV) sealer to the ABS sensor sealing surface.
  9. Install a new ABS sensor retaining clip.
  10. Install the hub/bearing assembly. Tighten to 90 Nm.

  1. Remove wheel knuckle.
NOTE When removing the wheel hub from the wheel knuckle the bearing will be destroyed and the bearing inner ring will remain on the wheel hub.
d752c5a.jpg

Fig. Using special tools, remove the wheel hub-X-Type
  1. Using special tools, remove the wheel hub.
  2. Using a suitable tool, remove the bearing inner ring.
  3. Using special tools, remove the wheel bearing.
  4. 2125147.jpg

    Fig. Using a suitable tool, remove the bearing inner ring-X-Type

    ee51ce7.jpg

    Fig. Using special tools, remove the wheel bearing-X-Type

To install:

b506586.jpg

Fig. Insert special tool 204-312 in to 204-309-X-Type
  1. Insert special tool 204-312 in to 204-309.
  2. Support the wheel knuckle on special tools.
NOTE Make sure wheel bearing is correctly orientated with the colored side facing inboard.
  1. Align the bearing over special tool.
  2. Using special tools, press bearing into wheel knuckle.
  3. Change special tool 204-312 to 204-313.
  4. Align the bearing and wheel knuckle over special tool.
  5. Slide wheel hub over the guide and align to the bearing.
  6. Using special tools install the wheel hub.
  7. Install the wheel knuckle.

  8. 5a457fa.jpg

    Fig. Using special tools, press bearing into wheel knuckle-X-Type

    b9fcc3f.jpg

    Fig. Change special tool 204-312 to 204-313-X-Type

    be319f2.jpg

    Fig. Align the bearing and wheel knuckle over special tool-X-Type

    8a9e0dc.jpg

    Fig. Slide wheel hub over the guide and align to the bearing-X-Type
  1. Raise front of vehicle and support on stands.
  2. Remove appropriate road wheel.
  3. Using wire or string, secure brake caliper to road spring to take weight off brake hose.
  4. Raise vehicle sufficient to provide access for special tool 204-111.
  5. Install special tool 204-111 in road spring.
  6. Slacken tool adjuster to suit spring length.
  7. Install adaptor and thrust collar.
  8. Position stem of tool in center of spring passing dowel through slot in suspension turret.
  9. 24ce878.jpg

    Fig. Install special tool 204-111 in road spring-XJ Range and XK Range

    1d0063e.jpg

    Fig. Position stem of tool in center of spring passing dowel through slot in suspension turret-XJ Range and XK Range

NOTE When turning tool adjuster, ensure that tool stem does not rotate and disturb position of dowel in suspension turret.
  1. Engage dowel of special tool 204-111 in suspension turret and rotate to position across slot.
  2. Lower vehicle onto stands.
  3. Rotate tool adjuster to tension spring.
  4. Remove wheel speed sensor securing screw and withdraw sensor from vertical link.
  5. Remove nut securing tie rod outer ball joint to steering arm.
  6. Release ball joint from vertical link.
  7. Install special tool 211-098 on tie rod outer ball joint.
  8. Tighten tool bolt to release taper pin from vertical link.
  9. Remove special tool from ball joint and position tie rod for access.
  10. Remove nut securing upper control arm ball joint to vertical link.

  11. 3af9a83.jpg

    Fig. Install special tool 211-098 on tie rod outer ball joint-XJ Range and XK Range

continue...

Aug 03, 2010 | 2002 Jaguar X-Type

1 Answer

Are rear bearings pressed on the rear axle on a 2003 1500 chevy suburban


There press in the rear end housing, you will need a slide hammer to remove the bearing's, most auto parts will rent this tool.

Jun 22, 2010 | 2003 Chevrolet Suburban 1500

1 Answer

Can bearings be chaaged on front wheel hub of chevy 2000 suburban 2 wheel drive


Good news: they can be changed. Bad news: you have to change the entire hub, they are sealed bearings. The hub should cost $230 to $250. I just put one on my 2500hd and it cost $235.

Jun 15, 2010 | 2003 Chevrolet Suburban 1500

Not finding what you are looking for?
2000 Chevrolet Suburban Logo

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...