Question about 2007 Kia Spectra LX Sedan

Open Question

How do i program my fob keyless entry for 2006 kia optima without going to a dealership?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76846 Answers

SOURCE: How do I program my keyless entry? - 2003 Kia Sorento

go to this link for instructions with pictures

http://www.programyourremote.com/classified/DisplayAd.asp?id=1674

Posted on Jun 17, 2009

Ad
matney68
  • 426 Answers

SOURCE: 2002 trailblazer keyless entry unable to reprogram fobs

you should be able to have them tested at parts department at chevy dealership and I dont think they will charge ya. I may be wrong but they can test them.otherwise it could be a unit called a liftgate module is what recieves signal

Posted on Jun 25, 2009

soultrip
  • 103 Answers

SOURCE: program fob/reset keyless entry pad 95 cougar

If you open trunk and look on inside of trunk where hinge bolts are you will see code numbers . Owners manual will tell you how.

Posted on Sep 17, 2009

  • 205 Answers

SOURCE: honda ridgeline key fob program

If it is a factory keyless system than you do need it done by the dealer, but if it is an after market system then reply back with manufacture and model.

Posted on Oct 17, 2009

Molson02536
  • 3854 Answers

SOURCE: programing instructions for buick 2006 lacrossekeyless remote fob

Transmitter ProgrammingImportant: All transmitters which are to be recognized by the remote control door lock receiver (RCDLR) must be programmed in a single programming sequence. If the system is placed in program mode it will erase all previously programmed transmitters upon the receipt of the programming signal from the first transmitter. Up to 4 transmitters can be programmed. Do not operate or program the transmitters in the vicinity of other vehicles that are in the keyless entry program mode. This prevents the programming of the transmitters to the incorrect vehicle.

  1. Install a scan tool.
  2. Use the scan tool in order to access programming: Vehicle Control System/Computer Integrating System/Module Setup/BCM/Program Key Fobs.
  3. Press the START soft key on the scan tool. Important: The scan tool must stay connected until all of the transmitters are programmed.
  4. Press and hold the LOCK button and the UNLOCK button simultaneously on one transmitter. After a delay of 5-10 seconds, the scan tool will indicate that the transmitter is programmed.
  5. Repeat the previous step in order to program up to 4 transmitters.
  6. Remove the scan tool.
  7. Operate the transmitter functions in order to verify correct system operation.
Good luck

Posted on Dec 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Key fob kia


only at a KIA dealer

Mar 31, 2014 | Kia Spectra5 Cars & Trucks

1 Answer

2005 Kia Optima - remote FOB no longer opens doors or anything else after replacement of engine 12 Volt starting battery. FOB batteries are recent and good. Doors work fine from manual door switches. Is...


they might have lost their program. A dealership can reprogram the fobs and it should work. But if they constantly loose program it is the remote module. it is located in the dash under the radio. you'll see an antenna coming off it.

Sep 28, 2013 | 2005 Kia Optima

1 Answer

My 2006 Toyota Tundra SR5 will not go into program mode to program my keyless entry pads


The security system on Toyota products are added by the distributor in your region. Many of those security systems will not allow more than 4 key fobs to be programmed into them. Have you owned this vehicle since it was new? Have you tried to program more that 4 key fobs into it? Have you tried programming it more than 2 times? If you security system has had more than 4 key fobs programmed in then the only way to get it to reprogram is the replace the security unit with a new one. I found this out the hard way and had to replace mine in my 2000 tundra.

Aug 03, 2012 | Toyota Cars & Trucks

1 Answer

How does key fob work


Depending on the specification of your vehicle, the FOB generally serves one (or both) of the following functions:

1) Communicate with the vehicle's Keyless Entry system (operates central locking).
2) When inserted into the ignition, the transponder within the key will communicate with the vehicle's Body computer (BEM) to validate entry, before disengaging the immobilizer - allowing the vehicle to start.

When the key fob fails, you may lose functionality of the above systems.

Keyless entry failure - usually due to flat battery in the fob. Reprogramming of keyless entry can be done without dealership assistance.

Transponder/Immobilizer failure - this requires the key fob to be re-programmed by your local dealership.


Hope this helps....

Nov 28, 2011 | 1998 Toyota Camry

1 Answer

2001 kia optima lx keyless entry system reprogram


The 01 Optima had the keyless entry buttons right on the key itself. I'm not sure if the LX had the option... it was standard on the SE version. In any case, programming is done at the dealership, and is expensive. They use their special "code reader / writer" that plugs into the OBD II port under the dash. You provide all keys and they are recoded to the module that is located under the stereo. A cheaper option might be an aftermarket alarm installed at a local car audio shop. They are less expensive than you might think, even installed. Good luck.
P.S. the 01 Optima remote key had a problem with very short range. You needed to be within a few feet of the doors for it to work.

Dec 05, 2009 | 2001 Kia Optima

2 Answers

Honda ridgeline key fob program


If it is a factory keyless system than you do need it done by the dealer, but if it is an after market system then reply back with manufacture and model.

Oct 17, 2009 | 2006 Honda Ridgeline

1 Answer

Need to program fob L22733524 2006 Grand Prix GT. Bought fob off ebay.


GM FOBS cannot be reprogrammed at home...Dealer ($90-125) or go to a local car stereo shop and get their new keyless entry installed ($89)
Good Luck

Jun 14, 2009 | 2006 Pontiac Grand Prix

1 Answer

Keyless remote wont work dont know how to program


I have a 2004 Kia Optima EX V6. You have to get a new battery for your key fob(s) and take to dealer to program it. It can only be programmed when they hook it up to the computer. Cost around 40 bucks from Kia. Call around some use to charge only 10 bucks. Good luck.

Feb 23, 2009 | 2004 Kia Optima

2 Answers

Key less entry


you have to get a kia keyless remote a mitsubishi won't work

May 29, 2008 | 2001 Kia Optima

Not finding what you are looking for?
2007 Kia Spectra LX Sedan Logo

Related Topics:

541 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...