Question about 2008 Dodge Charger

Open Question

How is the rotor of the rear brakes of a 08 charger removed? I understand the ER brake is involved.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76070 Answers

SOURCE: are the rear brake rotors, on a 2006 dodge charger

they are rotors, they are not floating rotors

Posted on Jul 01, 2009

Ad
  • 1 Answer

SOURCE: cannot remove rear rotor

you can also spray a good amount of W-4 or any kind of rust solvent where the disc sits on the hub. Let it stay for a while make sure it is soaked, make sure the car is in Neutral not in park!! What you would want to do then is hammer with a 4LBS plastic mallet from the inside out of the rotor by rotating it in three to four different positions. Repeat this process a couple of times and it will come off. Make sure there is no locking washer on the wheel bolts, if so you will have to cut them off. Trust me i just changed mine two weeks ago and it worked fine!

Posted on Aug 21, 2009

johnjohn2
  • 5763 Answers

SOURCE: trying to remove rear rotor. removed spring clip

yes, the e- brake shoes are holding it, some have a little window on the back of backing plate use a screw driver or adjusting tool to turn adjuster to loosen shoes then rotor will slide off, remember to adjust back, good luck,

Posted on Nov 26, 2009

  • 37 Answers

SOURCE: how to remove the rear brake rotor on a 2006 dodge

Single rear wheel - Remove both caliper bolts.. remove caliper and pads.. remove rotor.. they are usually rusted on pretty good.

Rear Dually- the rear rotors are mounted with the hub assembly.. you must first remove the rear axles.. then remove nut holding load on bearings.. then the rotor and hub assembly will come off as one unit.. removed rotor from hub..

Posted on Apr 13, 2010

  • 45 Answers

SOURCE: remove rear brake rotors on a dodge ram 3500

Brake rotors are pressed on just enough to where they shouldn't come off when you are changing the tire .They are held on by the same studs that hold your time on . Remove the tire and tap the rotor with a wooden or plastic malord (hammer) it should come right off. Some car makers put some small bolts on them .when you pull the tire off you can see the small bolts if they are there ,just unscrew them and the rotor will come off .

Posted on Jan 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have an 08 Avalanche. Having a severe grinding noise when coming to a stop in front. My brake pads are fairly new. Just started on Thursday. Sounds horrible now. What could it be.


Hi Benjamin:
I'd be getting the brakes checked (or actually check them myself).
That involves getting the vehicle jacked up, removing the wheels, and visually inspecting the brake pads and discs.
PLEASE! This is a safety issue and you NEED good brakes.

Don't delay/ Get them checked.
Best to you.

Jun 05, 2016 | 2008 Chevrolet Avalanche LS

2 Answers

I left my car (Mercedes C180 auto 1994) with a mechanic to replace the back and front brakes. In the process, the mechanic said he had to replace the calipers on the brakes. When I drove the car home and...


I would say one of two things happened. first maybe the parking brake shoes need adjustment. the most common that i see all the time even with newwer cars and trucks, the rear brakes are set up two ways, the type your car uses is the disc rear brakes used to stop the car and then for the parking brake it uses shoes inside the rear of the brake rotor, inside the rotor it gets very rusty and the shoes tend to rust awat from the metal mounting braket it comes on. i see this all the time, when you go to remove the rotor as you slide the rotor off the shoes fall apart and can not go back on, as along as the rotor is not removed it will stay in place, this problem would of occured anyway it would of taken a while longer and then you would of heard noise from rear wheels but it happened sooner due to removing the rotors, its not there fault but they should of called you and told you that you would need parking brake shoes but thought that you may not use the parking brake which is a bad thought in there part. maybe its just an adjustment that need to be made to the parking brake. heres a picture of the rear shoes to show you the metal bracket the shoes come apart from. another thing is that if the rotors were replaced then that explains it more as the old rotors contain rust and build up and that helped make the parking hold bettter.lets hope it just an adjustment.johnjohn2_137.gif

Aug 06, 2011 | Mercedes-Benz 190-Class Cars & Trucks

2 Answers

How to remove brake rotors on a 1996 ford explorer


How to replace the rear brake pads on a 1995 through 2001 Ford Explorer The system utilizes a drum-in-hat type rear brake rotor. The integral drum allows the use of a drum-and-shoe type parking brake system. All other components are similar to their front disc brake components Remove the two bolts on either side of the brake hose with the rubber boots. Do not remove the four bolts where the axle ties in. The two bolts to be removed require a 10mm socket/wrench. Loosen the pads from the caliper Rotor Removal In order to take the rotors off (replace with new or have them machined), it is best to loosen the emergency brake shoes. To do this, behind the rotors, in the back there is a rubber plug, remove that and you can use a screw driver to engage the teeth of the adjusting screw, turn it clockwise to loosen, usually 10-20 teeth. Usually this means turn it downward. After this, it may still be difficult to get the rotors off without tapping them. Use a rubber mallet and hit them from behind. Before really whacking the rotor, make sure you have loosened the adjusting screw enough. It may take heavy swings of the rubber hammer to do this. It will eventually break loose. Parking Brake You might want to check the parking brake while you are here. To remove:
  • Remove the rear disc brake rotor.
  • Remove the outboard return spring.
  • Remove the adjusting screw spring.
  • Remove the rear brake shoe hold-down spring and pin.
  • Remove the brake shoe adjusting screw and nut.
  • Remove the front brake shoe hold-down spring and pin.
  • Remove both parking brake shoes and the inboard return spring.
  • Check the parking brake lever for excessive wear and replace as necessary.
To install:
  • Position the front parking brake shoe to the backing plate and install the hold-down pin and spring.
  • Install the rear parking brake shoe with the inboard return spring.
  • Position the brake shoe adjuster screw and nut on the shoes and install the rear shoe hold-down pin and spring.
  • Install the brake shoe adjuster spring.
  • Install the outboard return spring.
  • Adjust the parking brake shoes and install the rotor, caliper and wheel.
  • Lower the vehicle and tighten the wheel lug nuts to 100 ft. lbs. (135 Nm).
ADJUSTMENT
  • Measure the inside of the drum portion of the rear brake rotor
  • Remove the rear disc brake rotor.
  • Using Brake Adjustment Gauge D81L-1103-A or equivalent, measure the inside diameter of the drum portion of the rear disc brake rotor.
  • Subtract 0.020 in. (0.508mm) from the first measurement, adjust the brake shoes to that size
  • Adjust the parking brake adjuster screw until the outside diameter of the parking brake shoes measures 0.020 in. (0.508mm) less than the drum measurement.
  • Install the rear disc brake rotor.
Reassembly Reassembly is easy. Put new or machined rotors back on by sliding them over the lugs (they should slide on easily.) Loosen bleeder valve (having a catch bottle handy is good). Push calipers in slowly (using a c-clamp or large channel lock pliers), close bleeder valve. Put on pads. Lubricate metal clips with small amount of anti-seize. Re-adjust the emergency brake by turning the opposite direction from loosening. Refill the brake master cylinder

Aug 09, 2010 | 1996 Ford Explorer

1 Answer

Replace rear brake pads


Rear disc brake pads offer better performance and are not as affected by moisture like conventional brake shoe style brakes are. Rear disc brakes are similar to front disc brakes. The main difference is that rear disc brake systems must incorporate the emergency brake system. There are two methods widely used for the emergency brake with rear disc systems. The first system is a brake shoe inside the brake disc that is actuated by the emergency brake lever. The second is a screw style actuator inside the brake caliper. When activated the brake pads are forced into the brake disc and held tightly by the emergency brake lever.
READ COMPLETELY BEFORE STARTING
Step 1 - Identify Rear Disc Brake Components
rear_brake_pads.jpg Rear disc brake assembly includes; rear brake disc, rear brake pads, brake caliper mount and a caliper mounting screw. (Note: Some vehicles do not have the rotor mounting screw.)
Step 2 - Removing the Rear Brake Caliper Mount Bolts
rear_brake_pads_2.jpg To replace rear brake pads and rotors the rear brake caliper needs to be removed. First loosen the rear brake caliper mount bolts and remove them. Turn counter clockwise.
Step 3 - Lift Rear Brake Caliper from The Caliper Mount
rear_brake_pads_3.jpg After the caliper mount bolts have been removed, gently lift the brake caliper from the caliper mount. Inspect the caliper slides; they should move freely in the caliper mount. Remove rear brake pads and hardware.

Step 4 - Removing Caliper Mount Bolts
rear_brake_pads_4.jpg With a socket wrench or other appropriate removal tool, loosen the rear brake caliper mounting bolts. Remove bolts and lift the caliper mount and remove it from the vehicle. Remove the retaining screw from the disc mounting hole. Tap the rotor gently to release any rust that has accumulated between the rotor and bearing hub. Lift brake rotor from wheel hub holding on tightly, using both hands. You do not want to drop the rotor.

Step 5 - Removing Rear Brake Rotor
rear_brake_rotor.jpg Remove the retaining screw from the disc mounting hole, tap the rotor gently to release any rust that has accumulated between the rotor and bearing hub. Lift brake rotor from wheel hub, hold on using both hands and do not drop.

Step 6 - Install New Brake Rotor
rear_brake_rotor_2.jpg Check the new rotor against the old brake rotor to make sure they are the same size. Clean the mating surface on the wheel hub before the new brake rotor is installed. Reinstall rotor retainer screw.
Step 7 - Reset Rear Brake Caliper
rear_brakes_7.jpg Before new brake pads can be installed, the rear brake caliper must be reset. The reset tool winds the piston back into position so the new brake pads will fit. This style of brake caliper will not compress with a clamp tool; it can only be reset with the proper reset tool.
Step 8 - Reinstall Rear Caliper Mount and Install New Rear Brake Pads
rear_brake_rotor_3.jpg After the caliper has been reset, reinstall caliper mounting bolts and make sure the bolts are tight. Then match up the old brake pads to the new brake pads. They should be exactly the same except, of course; the old ones will be worn out. Check the new brake pads for proper fit and install any brake hardware that is required.
Step 9 - Remount Rear Brake Caliper
rear_brake_rotor_4.jpg Reinstall the brake caliper, align brake pad hardware and reinstall caliper mounting bolts. (Note: align the rear peg of the brake pad to the groove in the caliper piston.) Recheck and retighten all caliper and caliper mount bolts. Bleed brake system to relieve any air in the system. Before driving the vehicle, push the brake pedal down and let it up slowly. This operation forces the brake pads to travel to the brake rotors. DO NOT DRIVE VEHICLE until proper brake pedal operation resumes. When test driving vehicle listen for any unusual noises during the operation of the brakes.
WARNING! Always have the vehicle under inspection on level ground, in park with the emergency brake on. Always wear protective eyewear, gloves and necessary clothing before inspection or work begins. Never crank an engine over when anyone is near the battery or engine. Always have an operational fire extinguisher close by, obey all first aid instructions in the event of an injury. Never stand in front or behind a vehicle when cranked over or running. When engine is cranked over keep hands and clothing away from rotating components. Never move a car without proper brake pedal operation.

Jun 01, 2010 | 1995 Saab 900

1 Answer

I have a 2006 Dodge Charger Daytona R/T. What


O'reillyAutoParts Brake Best Select - Brake Pads Part Number: SM1057B Line: BB
  • Rear
  • Semi-Metallic Pads
  • Police Package
  • With Heavy Duty Brakes
  • Limited Lifetime Warranty Performance Friction - Brake Rotor Part Number: 348.067.01 Line: PFC
    • Police Package
    • Rear
    • Limited Lifetime Warranty $139.99 Each
Brake Best Select - Brake Pads Part Number: SM1058 Line: BB
  • Front
  • Semi-Metallic Pads
  • Police Package
  • Limited Lifetime Warranty
Performance Friction - Brake Rotor Part Number: 342.055.01 Line: PFC
  • Heavy Duty
  • Front
  • Limited Lifetime Warranty
$132.99 Each

Apr 29, 2010 | 2006 Dodge Charger

1 Answer

Help with doing pads and rotors in back.


Interesting!... What/Where did you hear about 'factory bolts shearing" I've done some research and have found NOTHING with regard to this. The rear brake service procedure is no different than the front (except, you must release the emergency brake in order to remove the rear rotors). I don't understand your concern. I sincerely hope you are resurfacing (remachining) rotors and replacing pads. It's important rotors be remachined (resurfaced) when replacing pads... if not, rotors can overheat and wear out faster than their normal lifetime.

Jun 05, 2009 | 2003 Hyundai Santa Fe

1 Answer

Rear brake rotor removal


have to release the e break on the inside of rotor think this has an extra brk pad

May 09, 2009 | Ford F-350 Cars & Trucks

1 Answer

2002 hyundai accent needs brakes


hi from uk to renew front disc(rotors) and brake pads on the accent are not beyond the mech minded diy er and can easilly be done if you follow instructions on the haynes manual etc and would save$$$$s in dealer charges ? if you diy as for the rear brakes they are drum brakes with shoes that are auto adjust but again can be done by diy with help of manual ? as for cost of parts ? you can obtain/price of all parts from good auto shop/superstore also a manual ? then by all means obtain a quote ? for local garage to do the brakes with cost of labour and parts ? then consider option of diy? i am sure you will be tempted/inspired if you browse the work involved hope this helps? contact again if you feel lucky? will be glad to assist if you get stuck? or req info ? merry xmas from uk

Dec 19, 2008 | 2002 Hyundai Accent

2 Answers

Emerg. Brake Drum Removel on E450 .


The park/emerg. brakes should be integrated with the rear brake rotors. To replace them involves removing the calipers and brackets. You should be able to slide the rotors off. You may have to back the park brake shoes off with the shoe adjusters to remove the rotors due to the rust lip that often develops within, but they should slide off once freed. Hope this helps.

Dec 05, 2008 | Ford F-450 Cars & Trucks

2 Answers

1999 Trans Am Rear Rotor Problem


Look around at posts if you can see any flat head small bolt if not it is rust the only hammer can do this job I saw using a torch too.

Apr 20, 2017 | 1999 Pontiac Firebird

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

325 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...