Question about 1994 Chevrolet C1500

1 Answer

What type of gear lubricant do i use - 1994 Chevrolet C1500

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 57 Answers

Not sure which part you are lubricating, but the folks at the parts store can tell you exactly what you need.

Posted on Aug 20, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is required fo gear box lubricant


Depends on the type of gear box,auto,s have transmission fluid ,manual gearboxes have differant grades of oil,check your hand book under spec,s.in the back.

Dec 03, 2016 | Cars & Trucks

1 Answer

Gear box trouble shooting


type gear box trouble you having.have you replace gear box lubricant or check lubricant level.

Mar 27, 2013 | Cars & Trucks

1 Answer

I need to know what kind of tranny fluid goes in a manual transmission on a 1989 gmc seirra with 305 its a stepside to. i put amsoil synthetic manual synchromesh transmission fluid in it but im worried...


Muncie 4 (117MM) speed---Lubricant Type---------80W-90 Gear Oil
Muncie 5LM60 (HM-290) 4 & 5 Speed ---------Lubricant Type------Syncromesh Trans Fluid T2850

Oil Capacity= 5 Speed (85mm & 109mm)--3.6 pt (US)
(New Venture Gear 4500)--8pt (US)

4 Speed= (85mm)--3.6pt (US)
(117mm)--8.4pt (US)


Hope this helped you ??

Jun 14, 2011 | 1989 GMC Sierra

1 Answer

What type of lubricant is required for the limited slip rearend and does it also require an additive?


A good gear lube, like an 80-90 weight gear oil, and yes, a limited slip also needs a limited slip additive. This comes in a little bottle, add it first, then the other gear oil.

Jan 09, 2010 | 2001 Chevrolet Silverado 1500

1 Answer

Tring to find out what type oil goes in the rear axle of a 2003 dodge dakota 4x4 with a 4.6 engine


Mopart Synthetic Gear Lubricant 75W-90
NOTE:
Trac-Lok T differentials require Limited Slip Additive in the lubricant.
Trac-Rite differentials DO NOT require Limited Slip Additive.

Nov 28, 2009 | 2003 Dodge Dakota Club Cab

1 Answer

What is the capacity of the transfer case and exactly what fluid do i use


GM Full-Size Trucks 1980-1987 Repair Guide

Transfer Case - FLUID RECOMMENDATIONS
The type of lubricant used in the transfer case varies with model year and type of transfer case. Refer to the list below for the type that applies to your truck.

1980
Conventional transfer cases require SAE 80W or SAE 80W-90 GL-5 gear lubricant.
Full time systems use SAE 10W-30 or 10W-40 engine oil.
1981
Conventional transfer cases require DEXRON®II transmission fluid.
1982-85
All transfer cases require DEXRON®II transmission fluid.
1986-87
All transfer cases except the K30/35 series require DEXRON®II transmission fluid.

For fluid recommendations for the K30/35 transfer cases refer to the owner's manual.
LEVEL CHECKS

fb6e8b4.jpg
Fig. Model 208 Transfer Case

Check the four wheel drive transfer case lubricant level every 4 months or 6,000 miles.
  1. With the truck parked on a level surface and the parking brake firmly applied, remove the filler plug from the rear of the transfer case (behind the transmission). Be careful not to take out the drain plug at the bottom.
  2. If lubricant trickles out, there is enough. If not, carefully insert a finger and check that the level is up to the edge of the hole, EXCEPT in full time four wheel drive cases should be 1 /2 in. below the hole.
Lubricant may be added, if necessary, with a funnel and tube, or a squeeze bulb.



DRAIN AND REFILL
Part Time Systems
No intervals are specified for changing transfer case lubricant, but it is a good idea for trucks that are worked hard or driven in deep water.
  1. With the transfer case warmed up, park on a level surface and apply the parking brake.
  2. Slide a pan of a least 6 pts. capacity under the case drain plug.
  3. Remove the filler plug from the rear of the transfer case (behind the transmission). Remove the drain plug from the bottom.
  4. Wipe the area clean and replace the drain plug.
  5. Add lubricant with a suction gun or squeeze bulb. Conventional transfer cases require SAE 80W-90 GL-5 Gear Lubricant.
  6. When the lubricant level is up to the bottom of the filler hole, replace the plug.
Full Time Four Wheel Drive
The full time system requires oil changes at regular intervals, according to the amount and type of work done by the unit. Trucks used for normal on-off road work should have the transfer case oil changed at 24,000 mile intervals. When used for heavy duty work, trailer towing, snowplowing, and the like, the interval should be halved to 12,000 miles. If the truck is exposed to extremely dusty or muddy conditions, the oil should be changed at 1,000 mile intervals.
The transfer case oil must be hot before changing. Drive the truck until the engine has reached normal operating temperature, and park on a level surface.
  1. Slide a pan of at least 8 pts. capacity under the case drain plug.
  2. Remove the filler plug.
  3. Remove the lowest bolt from the front output shaft rear bearing retainer cover, and allow the lubricant to drain. Be careful; the oil will be hot. There may be a drain plug. If so, remove that instead.
  4. Remove the six bolts on the left (driver's) side of the case which secure to P.T.O. (power take-off) cover. Remove this cover and allow the lubricant to drain out.
  5. Remove the speedometer driven gear from the upper left rear corner of the case.
  6. Use a suction gun to remove as much lubricant as possible from the case cover location and the speedometer gear location.
  7. Install the speedometer driven gear, the P.T.O. cover, and the lowest bolt or drain plug.
  8. Add approximately seven pints of oil through the filler plug opening. The proper oil to use is 10W-30 or 10W-40 engine oil.
  9. Check the fluid level and add sufficient oil to raise the level to 1 /2 in. below the filler plug opening. Replace the plug, and wipe the surfaces of the case and skid plate to remove any excess oil. Drive the truck and check for leaks.

I really hope help ypou woth this (remember rated this help) Good luck.

Oct 16, 2009 | 1983 Chevrolet Silverado

Not finding what you are looking for?
1994 Chevrolet C1500 Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...