Question about 1995 Jeep Cherokee
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: service 4wd switch
I have the same problem the switch is on the transfer case! what your talking about is your vehicale information center. the stupid thing sucks I also replaced it but it only comes on some times now. dont know!
Posted on Sep 12, 2008
SOURCE: 2002 jeep cherokee laredo
My 98 Jeep Grand Cherokee had the same problem. Over heated when standing still. Took it to dealer and they could not find any problem with cooling fan. After doing my own investigation I found out that the electric cooling fan would begin to seize up after about 1hr. of operating. (gets hot)
The dealer would look at fan and see that it was running and think its ok. The problem is, it wasn't running fast enough.
I have a relay on the right side of front fender and jumped the fan to stay on with motor off. (must know what your doing). After about 1hr. fan started slowing way down. Returned it to dealer told them what the problem was. They were not smart enough to jump the relay so they put a couple hundred miles on it even though i told them it works OK when moving. Make sure you tell dealer to use the relay to jump.
Replace cooling fan motor. Works great
Posted on Feb 27, 2009
You can check fluid level by removing the rubber plug in the cover. Fluid is full when on level ground, it is just at the edge of the hole (or very close) if you are already getting noises out of there, you can remove the cover and inspect gears for wear or breakage. If you find a large amount of metal debris in the lube it tells you something bad is going on back there. Although rebuildable, it's not a home job...requires exact settings in order to operate properly. You can find good units far cheaper than even a gearset costs in any scrapyard. to match ratio, count the teeth on the ring gear and the pinion gear. the replacement MUST have the exact same number. Before swapping diffs, check all back there to make sure noise is not from somewhere else.
Posted on Jun 20, 2009
Tips for a great answer:
Oct 26, 2016 | 2000 Jeep Grand Cherokee Laredo
Mar 24, 2013 | 1994 Jeep Grand Cherokee
Dec 13, 2010 | 1997 Jeep Grand Cherokee
Nov 22, 2010 | 1996 Jeep Grand Cherokee
Aug 15, 2010 | 1994 Jeep Grand Cherokee
Apr 16, 2010 | 1994 Jeep Grand Cherokee
Mar 27, 2010 | 2000 Jeep Grand Cherokee
Aug 13, 2009 | 1994 Jeep Cherokee Country
Jun 20, 2009 | 1994 Jeep Grand Cherokee
55 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: