Question about 1995 Ford F350

2 Answers

Is there a second firing order for the truck i re did the firing order and the truck wont start

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,092 Answers

5.0L and 5.8L same fireing order, 7.5L fireing order, fireing order for both below.Hope this was very helpful.

is there a second firing - 8dfb5a8.gifa5dc104.gif

Posted on Aug 19, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 2,019 Answers

Don't know what you mean about "second" firing order. There is only one. But it may depend on the engine, not the F350 chassis.

The 351windsor firing order 1-3-7-2-6-5-4-8.
The distributor rotor turns COUNTERCLOCKWISE
The marked # 1 position on the distributor cap faces to the REAR and slightly towards the drivers side

Starting at the firewall, the plugs are numbered :
4 - 8
3 - 7
2 - 6
1 - 5
With cylinder #1 on the front right passenger side, and #5 on the front left drivers side.

But look on the valley cover to see for sure.

Posted on Aug 19, 2010

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: truck will not start. had

check timing belt

Posted on Jul 27, 2008

Goofguyster
  • 379 Answers

SOURCE: changed spark plugs and firing order is correct but truck wont start

well if it started before then the distributor is most likely good but check your ignition coil and also you ignition module also the pickup coil

Posted on Feb 26, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the firing order and why wont the car start again when you have driven for a while


Google search your manufacturer year, make, model and words firing order. You will find it in the search results. As for the second part of your question, there is insufficient information to diagnose your problem.

May 25, 2015 | Cars & Trucks

1 Answer

Changed spark plugs and firing order is correct but truck wont start


well if it started before then the distributor is most likely good but check your ignition coil and also you ignition module also the pickup coil

Feb 26, 2013 | 1986 Ford Bronco

2 Answers

My truck wont start i just changed new spakplug cables


wires are crossed up. 1,8,4,3,6,5,7,2 is the firing order, and the order of the wires around the cap.

Nov 06, 2010 | 1989 Chevrolet C1500

2 Answers

Change spark plugs and wires not truck wont start. could firing order be wrong!


You could have mixed up the order of the spark plug cables causing the firing order to be wrong. What is the exact year, make, model, and engine size of your truck?

May 31, 2010 | GMC Suburban Cars & Trucks

1 Answer

Changed distributor cap and now van wont start did not have firing order . we now have correct firing order. van was possibly flooded from checking firing order. now carborator is smoking and engine wont...


I would pull the plugs and let the gas into the cylinders to dry out , you may have a hydrolock engine after putting so much gas into it , recheck the firing order to be sure is OK ususlly when you see a carb backfiring and smoking the firing order is not right

Aug 02, 2009 | 1992 Chevrolet Lumina APV

1 Answer

Did a tune up now truck wont crank


Are you sure you have the firing order correct? Pull the cap and follow the traces I know #1 and 4 are on the opposite of what it looks like on the outside of the cap there may be others the same way

Jun 04, 2009 | 1992 Chevrolet S-10

1 Answer

Need firing order


4 cylinder Fire order = 1342
Distributor rotation = clockwise. good luck

May 27, 2009 | 2000 Dodge Caravan

1 Answer

1994 dodge 1500 wont start after changed plug wires


Make sure your firing order is correct. Also if you replaced cap and rotor make sure coil wire isnt loose. If you cant find the firing order its stamped on your intake manifold, cylinder numbers should also be stamped above each cylinder on the manifold.

Mar 27, 2009 | 2001 Dodge Ram 1500 Truck 2WD

2 Answers

88 chevy cheyenne wont start


sounds like tbi has gone out on it thats what happend to my 88 silverado

Jul 11, 2008 | 1988 Chevrolet C1500

Not finding what you are looking for?
1995 Ford F350 Logo

Related Topics:

295 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...