Question about 1999 Mazda Pickup

2 Answers

Were i can find blower fuse or relay in 1999 mazda b2500

Posted by on

  • patricsoares Aug 19, 2010

    no problem found under dash or hood fuse box all fuses good!

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I had the same problem , turned out to be a solder joint failed on the resister , quick easy fix , resister is held in with 2 screws under the heater body , easy to get to and check , 2 plugs go in to it , B2500 2002 4X4

Posted on Jun 18, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 6,826 Answers

Check under the dash and under the hood on the driver's side for the circuit protection fuse box.

Posted on Aug 19, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I know wich one is the relay for the gaz pomp on a 1999 Mazda B2500


You look it up in factory service info , look at a wiring diagram , fuse box diagram etc.... This vehicle also has an inertia fuel shut off switch . You can view all this at http://www.bbbind.com/free_tsb.html

Also know that the PCM - engine computer turns on the fuel pump relay . If there is no crankshaft position sensor (RPM signal ) to the PCM ,the PCM will not turn on the fuel pump relay . Relay #5 is fuel pump relay . Do you know how to test electrical circuits ? Use a Volt meter ? Or are you just going to replace the relay and hope that's the problem .

Jan 24, 2017 | Mazda Cars & Trucks

1 Answer

2001 Mazda Truck B2500 4cyl highbeams stopped working


check fuses and the relay -use your owners manual to locate those -also check both bulbs -they may have both blown out at the same time- cheers Denny

Nov 29, 2015 | Mazda Cars & Trucks

1 Answer

Power from blower diminishes when I press on the gas while a/c is on 1999 mazda b 2500.


1999 MAZDA B2500 OWNERS MANUAL - Fixya

www.fixya.com/cars/t14647042-1999_mazda_b2500_owners_manual
Oct 14, 2012 - 1999 MAZDA B2500 OWNERS MANUAL - 1999 Ford Ranger ... go to the link below and choose the 1998 ford ranger as the truck, they are the ...

Jul 26, 2015 | Cars & Trucks

1 Answer

1999 MAZDA B2500 OWNERS MANUAL


Thanks Dennis I will check it out. I never thought about fuse, I was putting my $ on vacuum line.

Oct 14, 2012 | 1999 Ford Ranger SuperCab

2 Answers

1999 Mazda B2500 will not start, light work but engine will not even try to turn over


What about starter. Do you hear the relay to click, or starter solenoid to act ...

Aug 23, 2010 | 1999 Mazda Pickup

1 Answer

Need to know if 1999 mazda b2500 has a transponder


if the head of the key is made of black plastic covering it is

Feb 06, 2010 | 1999 Mazda Pickup

1 Answer

Scaner won't power up when pluged into dlc


Fuse #5 10A Data Link Connector (DLC)
located in.

Passenger compartment fuse panel
The fuse panel is located on the left
hand side of the instrument panel
facing the driver’s side door. Pull the
panel cover outward to access the
fuses

Jun 02, 2009 | 1999 Mazda Pickup

1 Answer

Dashboard Lights will not go on Mazda Pickup B2500 1999


As long as all fuses are good, you need to check the light switch its self. Remove the light switch assembly from the dash. With a 12 volt circuit tester, check the wiring coming out of the switch. The dash lights will be powered along with the side marker lights.

Probe each wire that joins the switch, turning the switch on and off. If you don't have any loss of power here, it can be at the printed circuit board at the dash.
Bill

Nov 19, 2008 | 1999 Mazda Pickup

Not finding what you are looking for?
1999 Mazda Pickup Logo

Related Topics:

495 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...