Question about 2004 Chrysler 300M

Open Question

300m stalls and shuts off , code p0129 - 2004 Chrysler 300M

Posted by on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

P0129 and p0108




May 12, 2014 | 2003 Dodge Intrepid

1 Answer

Stalling wont idle

  • egr valve
  • egr sensor
  • cam shaft sensor
  • barometric pressure sensor (map sensor)
vacuum leak somewhere, out of time, broken timing belt or missing teeth.

Dec 12, 2013 | Cars & Trucks

1 Answer

P0129 and p0441 x2

code p0129 refers to barometric pressure-two low===causes wiring---BARO sensor, ---mechanical fault
code p0441 refers to evaporative emission (EVAP) system--incorrect flow detected=== causes ---hose connection/s---intake leak--EVAP canister purge valve

replace the BARO sensor and the purge valve after seeing that the filler cap is on correctly.

Dec 12, 2013 | Cars & Trucks

1 Answer

300m shut off

Check fuel pressure and injection cleanning and air intake; scanned computer to know fault codes there.

Mar 29, 2012 | 1999 Chrysler 300M

2 Answers

My 1999 chrysler 300m is always stalling while driving i bought brand new batt. Could it be a sensor that cause it to keep cutting off.

Battery probably not the problem. If it is stalling while driving, is there a service engine soon or check engine light that goes on before it stalls? If so, there is likely a code or codes stored in the computer that should point you in the correct 'sensor' direction, or tell you why it is stalling.

Nov 04, 2011 | 1999 Chrysler 300M

1 Answer

2004 dodge intrepid constantly stalls while driving. Car starts up after a few minutes. Only codes showing up are P0129, P0442, P0442P. What can be causing this, what is the fix?

P0129 Barometric Pressure Too Low

The shop manual gets into great detail about 5-VOLT SUPPLY CIRCUIT SHORTED TO BATTERY VOLTAGE.

Basically it is receiving the information from the Manifold Absolute Pressure sensor (MAP sensor)

Changing the MAP SENSOR may correct this issue. The problem is that the sensor may not be the issue and it may be the circuits that feed info to the sensor. The pressure is translated to and measured in voltage and the electronics that create the voltages could be at fault. The MAP sensor is on average $100.00 and cannot be returned once installed so if you replace it and the problem is not fixed you will not be able to get that money back.

P0442 Evaporator Emission Control System Leak Detected (small leak)

This is caused by a decrease in expected fuel tank pressure. It could be a loose or leaking gas cap. I leak in the evaporator hose or canister or in some cases a gas tank replacement.

I hope this helped.

Apr 05, 2011 | Dodge Intrepid Cars & Trucks

1 Answer

2001 Chrysler 300M repeatedly stalling; mechanics can't replicate

well, the power steering will freeze when the motor is not running. the mechanic may not find what seems to be the problem specially when no warning lights are coming. you can try replacing the fuel cervo and this will surely help. not everyone knows about this.

Feb 02, 2010 | 2001 Chrysler 300M

1 Answer

Code P0129

P0129 Barometric Pressure To Low

Feb 15, 2009 | 2003 Dodge Durango

3 Answers

Car keeps stalling!!!!

kmhs4,  I would suggest checking the battery terminals if you are recieving codes related to your voldtage. Please update us with what you decide to do.  Thank you

Sep 08, 2008 | 1999 Chrysler 300M

Not finding what you are looking for?
2004 Chrysler 300M Logo

Related Topics:

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides