Question about 2003 Ford Crown Victoria

1 Answer

Headlights go off but signal and tail lights stay on.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The lighting control module is defective and needs to be replaced...A well known defect. I know. I just researched this and replaced mine due to headlight outages. There is extensive information on the web regarding this dangerous defect. The NHTSA conduvcted an investigation and closed it.......No recall on the defective part. You wanna drive your Crown Victoria 2003-2005 at night?..........Pay money and replace the LCM.

Posted on Aug 22, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 caravan headlights stay on. And no tail lites but brake lites and turn signals still work and horn beeps randomly on its own.


Replace the turn signal switch. All exterior lights run threw it, except the high mount brake light. The horn also. If the head light switch is on the handle, this should take of it also. If the headlight switch is in the dash, you might have to replace it also if they stay on.

Sep 27, 2016 | 2000 Dodge Caravan

2 Answers

Dash and tail lights not workjng brake and turn signal on passanger side not working


The dash and tail lights are on two different circuits, and the brake and turn signals are on different circuits, so at least 4 circuits total.
I would start at the headlight switch and check for power on the first two issues.

Jan 18, 2014 | 1990 Buick Century

1 Answer

Have head and brake lights, no tail or dash lights.


A simple 12v test light will track this problem down.(Unless someone has been butchering the wiring,it's probably a bad headlight switch).

Nov 26, 2013 | 1997 Chevrolet Lumina

2 Answers

Tail light doesnt turn on with headlights but works fine as a break light and turn signal, why?


in the rear lights you may have two bulbs one is the turn signal the other one is stop light / tail light the stop light / tail light has two filaments, one for the stop light (21 watt) & one for the tail light (5 watt) it is possible that the tail light filament is blown, try replacing the bulb to see if that fixes the problem,also check all the fuses as well.......hope this helps......cheers.

Aug 15, 2011 | 1994 Cadillac DeVille

2 Answers

2007 Jeep Grand Cherokee..tail ligts and blinkers do not work when headlights are on..they work otherwise..another problem when headlights or running lights are on and I use left blinker, it blinks...


mporteous, It sounds like you have a light switch problem. I can't think of any other reason for the running lights and tail lights not working in this situation. Are your brake lights working when the headlights are off and how about when they are on? Do your four ways hazard lights work in these situations? Try all the lights under these conditions. The reason the left turn signal blinks very fast is because one of the bulbs are burned out. Try the left signal and one light (front or back) will stay on and the other will not come on at all. Replace the bulb that does nothing. Do this before you try all the lights in different situations. I think that you will have to replace the light switch. Good luck with this.

May 19, 2011 | 2007 Jeep Grand Cherokee Overland

1 Answer

I have a 1987 chevrolet caprice and when i turn my headlights on my right turn signal light comes on and stays solid on the dash and it makes the dinging noise. my front parking break on that side dont...


Does it do it if you just turn the parking lights on? I would suspect this is a bad ground causing the head or tail lamps to pull through the turn circuit. I came across this years ago in an 85 cutlass. the ground for the tail lights was very rusty. Cleaning and regrounding solved the issue.

Feb 21, 2011 | 1987 Chevrolet Caprice

1 Answer

One headlight and all 3 tails stay on when car/switch is off


Since the only thing common to all four is the wiring in the steering collumn that would be the first place to look.

Jun 22, 2009 | 2004 Chevrolet Cavalier

1 Answer

Dash lighting and tail light.


the bulb in the dash went out you need to remove cluster panel near where the light went out

Jun 02, 2009 | 2000 Mitsubishi Montero

1 Answer

98 jeep wrangler headlights wont turn on


I would check your headlight relay switch that is located in your steering colum

May 19, 2009 | 1998 Jeep Wrangler

1 Answer

2002 saturn l series has know brake lights or tail lights


this problem is caused by a defective headlight switch which is part of the turn signal switch. see photo.0d64bb1.jpg

Apr 20, 2009 | 2002 Saturn L-Series

Not finding what you are looking for?
2003 Ford Crown Victoria Logo

590 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...