Question about 1997 Chrysler Sebring

1 Answer

Engine is missing. What is the pattern? - 1997 Chrysler Sebring

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 6,826 Answers

FIRING ORDERS NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for replacement. If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason, it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your book to reflect how your engine is wired. Fig. 1: 2.0L and 2.4L Engines Firing Order: 1-3-4-2 Distributorless Ignition System Engine is missing. What is the pattern? - 90902g01.gif
Fig. 2: 2.5L Engine Firing Order: 1-2-3-4-5-6 Distributor Rotation: Counterclockwise 90902g02.gif
prev.gif next.gif

Posted on Aug 19, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 yaris 1.5 Ing. What's the torque pressure on heads


PDF]Complete Cylinder Head Torque Specifications for Domestic ...

olybrake.com/pdf/fel_pro_torque_specs_guide.pdf
When you consider what can go wrong when even "minor" gaskets fail, ... and engine block, tightening the head bolts compresses the gasket slightly, allowing ...Missing: ing

How To Torque Cylinder Head Bolts - EricTheCarGuy ...

? 25:08
https://www.youtube.com/watch?v=5WHBskK_F3o
Aug 29, 2010 - Uploaded by EricTheCarGuy
How To Torque Cylinder Head Bolts - EricTheCarGuy http://www.ericthecarguy.com/ Well ... What's the reason for changing the torque pattern?Missing: yaris

CTA Tools 9295 Toyota Head Bolt Wrenches -Dou



Dec 30, 2015 | Cars & Trucks

1 Answer

Miss fire on 1999 g m c danalie ruff idle


A more detailed problem description would yield you a more specific/helpful answer.

I'd suspect dirty fuel injectors if your tune-up is recent. A clean fuel injector sprays a fuel pattern into the fuel delivery system. A dirty injector will only squirt the fuel thereby causing an improper spray pattern causing a misfire at first then worsening if ignored.

Mar 23, 2014 | 1999 GMC Jimmy

1 Answer

1992 Mazda protege cut out at same location on a bridge twice now. Put in neutral and started up. Is it possible that a radio transmission is interfering with electrical system. The first time it happ


Try to find a pattern when this happen,Like you hit the same bump in the bridge,Or you left off the gas at that spot,or was using your clutch when it happened.How fast you were going or was the engine at an idle.Computers in cars are not affected by any outside source of radio or electric waves.They are hard wired to only sensors on your cars engine. When you can find a pattern then you can tell your mechanic when it does this. That way your not paying for hit and miss repairs.

Jan 29, 2014 | Mazda Cars & Trucks

1 Answer

Starter issue?


check starter mounting bolts either loose or missing one. if starter old probably starter drive pinion or fly wheel worn out.if starter new.but smaller size than old one you need to use shim on starter.

May 28, 2013 | Cars & Trucks

2 Answers

While idling, the engine sputters. check engine light on, reading misfire in cylinder four. Have replaced both coils, all wires, and all plugs. Still no help. I've come to a dead end. Anybody with ideas?.


Hi, this may be a dirty injector. Try putting some injector cleaner in the gas tank to see if that will clear it up. If not, you may need to pull up the fuel rail and check the injector flow pattern.

Jan 06, 2011 | 2002 Pontiac Grand Am

1 Answer

Engine misses likesomething binding up then takes off like up turned light switch on pops thru intaske wont take gas sometimes fine other no pattern to it at all


on an 86 there is a plug on the engine harness that gets corroded and may be coming apart if there was engine work done its up near the injector harness clean it up and plug it in tight hope this helps

Aug 03, 2010 | 1986 Ford Mustang

1 Answer

I have a 1994 Honda Accord 4 door v6. I have rough idle when in drive and smooth idle when in neutral. Also rough take offs from a stop or slow speeds. If I pump the gas pedal a few time the rough take...


  • does the engine miss? bumps is a rythmic pattern?
  • an engine miss will appear to diminish at higher rpm due to centrifical force.
  • other possible problem broken or flat motor mount.
  • is the idle rough in reverse?
  • if not
  • open hood
  • start engine
  • Left foot on brake (hard)
  • start engine
  • watch engine as you select drive
  • still holding brake with left foot / throttle gas with right foot
  • does engine dramatically move?
  • if so replace motor mount on offending side
  • if not possible engine miss or transmission problems

Jul 10, 2010 | 1994 Honda Accord

3 Answers

What does code p1391 mean when failing an emissions test


intermittent loss of crankshaft or camshaft position sensor.

Oct 14, 2009 | 1997 Dodge Ram 1500 Club Cab

1 Answer

I changed the intake manifold on my 1997 gmc safari van that has the 4.3L engine. Now the check engine light comes on. it puts out 3 codes ( po102 ) ( po300 ) and ( po507). What did i do wrong and where...


its soaking air somewere around the manifold make sure you thigten the bolts on the wight pattern if yoou dont know the pattern start from te center to the outside or reset the computer just unhooked the negative cable from the batery for 5 minutes,

Sep 26, 2009 | 1997 GMC Sierra

1 Answer

0300 trouble code


check ignition system , sounds like a ignition miss fire p 0300 normaly is a coil or lead fault or bad spray patterns on the injectors can also cause a miss fire when the engine is cold .

Jul 28, 2008 | 2001 Honda Civic

Not finding what you are looking for?
1997 Chrysler Sebring Logo

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...