Question about 1988 Nissan Pathfinder

Open Question

I require the torque setting for the head bolts of a gq nissan patrol

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 158 Answers

SOURCE: nissan patrol

1 st stage tension is 59 nm

2 nd stage tension is 108nm

hope this helps you out

Posted on Mar 08, 2009

Ad
alicantecoli
  • 22326 Answers

SOURCE: require ford escort rs 2000 1976 torque settings head bolts

2lt overhead cam with them horrible tappet adjusters,cast iron head but valves dont hit the head if the timing belt breaks ,but it does on the 1600 .called a pinto in america .Remember the assembly line well ,have many a fond memory of working on it and the staff canteen on night shift ,what lovely grub we got.Head bolt torque is about 80lbs because i used to pull them down to check them after the machine had tightened them up

Posted on Apr 24, 2009

SOURCE: head bolt torque settings for 720 nissan cab 2

dear friend-your torque setting on the 720 is the same as the L18 and is set at 85 - 90 nm.

Posted on Jul 23, 2009

radar001
  • 1051 Answers

SOURCE: Need to replace head gasket

I frequently use and highly recommend registering for free at www.autozone.com Your registration gives you access to a variety of repair and shop manuals, most giving you detailed repair instructions diagrams and specs.

Posted on Jul 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi my name is Sarah I just bought a 07/94 GQ NISSAN PATROL and I'm trying to find the engine number so I can register it can u help


No cannot help with that Sarah but if you go to one of the Nissan Patrol Forums and ask I am sure one of the guys there will help you out .
Try this one to start with in the link below and see how you go......................

Nissan Patrol GQ Y60 Ford Maverick

or this one

NissanPatrol com au Forum

Dec 15, 2015 | Nissan Cars & Trucks

1 Answer

Want to relace my front doors on a nissan patrol GQ (how)


you need a muscley friend to help on this one. Open the door wide and you will see 2 bolts at the hinges. undo these bolts and lift the door of the hinges. If you cannot get to these bolts there are 3 bolts per hinge on the door pillar . Undo them and lift off the door. Replacement is the opposite procedure but do not tighten the bolts as you will have to move the hinges to get the door adjustment correct. Once that is done tighten up all bolts.

Sep 14, 2013 | Ford Lincoln Continental Cars & Trucks

1 Answer

My nissan patrol 88 gq won't start after sitting


there is a filter in the injector pump, under the inlet line. could be blocked.

also try cracking the injector line and cranking the car to bleed the lines.

Sep 30, 2012 | Cars & Trucks

1 Answer

My 88 gq Nissan patrol won't start. There's clicking but won't kick over


Sounds like what happens when your battery is too low to make the starter kick over. At least from my experience. Could be something more like bad connection between battery and the starter. To clean these you could dip the positive cable of battery connectors in a cup of fresh cola or any other soda or baking soda in dissolved in water to clean it and then on the positive site you possibly would want to get a battery post cleaner or wire brush to clean it. because you do not want any of the soda getting inside the battery or it will be useless. This would make the electrolyte in the battery to become neutral and cause you to have to buy a new battery. I hope this helps. Thanks, Cody

Sep 13, 2012 | Nissan Cars & Trucks

1 Answer

Need to replace head gasket and require Nissan Patrol Y60 TD42 engine Head bolt torque specs


I frequently use and highly recommend registering for free at www.autozone.com Your registration gives you access to a variety of repair and shop manuals, most giving you detailed repair instructions diagrams and specs.

Jul 21, 2011 | Nissan Pickup Cars & Trucks

3 Answers

Torque settings for cylinder head nissan sentra


Tighten in sequence to 29ft.lbs then tighten in sequence to 58ft lbs. then loosen all bolts. Then tighten in sequence to 33ft lbs. then tighten each bolt in sequence 90 degrees then tighten each bolt again 90 degrees

Jul 18, 2009 | 1999 Nissan Sentra

1 Answer

Need 1990 nissan sentra torque settings and valve clearence


heinrichkemp: The engine in your car is a GA16i
I venture you are asking about the head bolts when you refer to torque settings. The head bolts used on this motor are torque to yield (streach bolts) If you are reusing them, you need to check them to insure they are not stretched beyond limits.
The way you measure the bolt is with a micrometer.
Measuring close to the end where the bolt starts to thread in, about 10-12 threads up, take a reading. Now, go to the other end of the bolt where the threads end and measure about 10 threads in.
There should not be more than a .009 inch difference (.228mm). If there is, discard the bold and get a new one.

You must use a sequence to tighten the bolts, below is the sequence.
11
13 9 3 1 6 8

14 7 5 2 4 10
12 15

torque 11,12,13,14 & 15 to 8.3 Nm (6.1 ft lbs)
Torque the main head bolts by the numbered sequence to
29Nm (22 ft lbs) first pull
64Nm (47 ft lbs) second pull
Loosten all the bolts completely
Tighten the to 29Nm (22 ft lbs) first pull
Tighten bolt # 1 clockwise 85 degrees
Tighten bolts #2- 10 65 degrees
Nissan noted that if you do not have a torque angel meter, you can use a regular torque wrench and torque all the bolts to 69Nm (51 ft lbs)
The valves on this engine have hydraulic lifters, consequently require no adjustment.

Apr 11, 2009 | 1990 Nissan Sentra

1 Answer

Nissan patrol


1 st stage tension is 59 nm

2 nd stage tension is 108nm

hope this helps you out

Oct 26, 2008 | 1990 Nissan Pathfinder

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

79186 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...