Question about Ford Ranger

Open Question

I was driving my 2009 ford everest with a speed of 80 to 100kph then i slow down by stepping the brake pedal then suddenly i heard a sound like a whistle.. like an air coming out from the vaccum of my brakes... i released the brake pedal and step on it again to wonder if i can still hear that sound/whistle but its gone... so i continue driving accelerating from 80 to 100kph for about 5mins. of less then again i have to slow down... smoothly a applied a brakes...then that sound i heard it again.. i remove my foot on the brake pedal and step on it again.. and its gone again..WHAT POSSIBLE CAUSE THIS WHISTLE/SOUND

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 11 Answers

SOURCE: I have a 2008 Dodge

Hi, 2possible suggestions that will help you, when dealing with a wind noise it is almost always visible in the affected area by seeing a redich resedue caused by entering dust particles,

you could also use''masking'' duckt tape to seal off all your suspect areas(starting with the r/h section of the windshield) then by trail and error systematically remove piece by piece of this tape untill your noise is located, then you can decide on what to do with the ''leak''

Posted on Jul 23, 2008

Ad
emissionwiz
  • 77169 Answers

SOURCE: Engine makes a whistle sound.

It is the air bypass valve that makes this noise

Posted on Oct 05, 2008

  • 393 Answers

SOURCE: 2000 isuzu rodeo brake problems

your master cylinder is gone. when stopped apply pedal and hold let up slightly then reapply if pedal sinks to floor master is bad.

Posted on Nov 16, 2008

  • 306 Answers

SOURCE: Brake problem (squishy sound)

A sound like that that you can hear inside has to be the vacumn assist tank leaking air. Did you bleed the new master cyl ?

Posted on May 04, 2009

  • 1509 Answers

SOURCE: 2009 Hyundai Sonata-clicking noise at brake pedal,brakes applied

This is not a rich mans car so its normal. Your hearing the solinod that lets you take the car out of park after the brake is depressed so the car can't be put in gear unless the brake is on. If the noise bothers you the soliniod can be found and wrapped in insulation like a rich mans car them you can ride on feeling like a rich man too. ( the Beatles sang that a long time ago) and its still true today.

Posted on Oct 14, 2009

Testimonial: "Thanks. Dealer hasn't been helpful. I'll see how far I can go before I run out of patiencs."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car randomly accelerates without pushing down on pedal and cruise control is not working


It sounds to me like a problem with cruise control? Turn it off and/or unhook it, drive it a bit and see if accelerating problem goes away? If it does, you need to troubleshoot the cruise control. Any applicable trouble codes?
That sounds dangerous to me, I'd disable the cruise control till you find the problem.
I don't know what testing you have done?

Mar 27, 2017 | 2000 Ford Taurus

1 Answer

2000 ford escort right front noise when you step on brake


I would suggest to check brake calipers and or brackets to make sure tight. Also check make sure pads are secure.

Dec 15, 2012 | 2000 Ford Escort

1 Answer

My 2009 Chevy S-10 Blazer's anti-lock brake system activates when coming to a stop on dry pavement. The typical anti-lock sound is heard and the brake pedal pulsates. There are times when it feels like the...


check the rotors for scoring,worn rotors will "feel"like the abs is coming on due to the vibration caused.and will account for the extended stopping distance.

Dec 09, 2010 | 2001 Chevrolet Tahoe

1 Answer

I have a 91 ford F-150 with 17in American Racing Alum rims and horrible brakes. I have two problems. 1) Sometimes while driving the brakes when slightly pressed in they [ the brakes ] with apply; but other...


Have you ever replaced the brake calipers sounds to me you have stuck caliper piston and maybe stuck caliper bracket pins. Mayb e the caliper has come loose which is very dangerous.

Nov 16, 2010 | 1991 Ford F150

1 Answer

2001 Chrysler 300 Cruise control User Manuel information What is the slowest speed a driver can slow down to before having to turn off cruise control?


Never heard this one before but normally the cruise control goes off when you step on the brake pedal.I think it might be at 35 mph.

Mar 19, 2010 | 1999 Chrysler 300M

1 Answer

Tranny noise coming to a stop


sounds more like the brakes than anything else. it sounds like youre down to metal on metal where you dont have a brake pad left on that side of the car ...have it checked but i dont think it will be the transmission

Feb 28, 2009 | 1995 Ford Windstar

1 Answer

Emergency break pedal stuck to floor, but break is disengaged


sounds like your brake cable has broken or there is something damaged in the pedal assembly.........try pulling on the release handle and move the e-brake pedal back to its off position by hand at the same time.(you may have to tie it in this position to keep it up)If that doesnt work there is a sensor on the pedal assembly that you should be able to bypass by either disconecting the wire(1 wire system) or connecting the two wires together (2 wire system)Especially if your truck is a standard the e-brake is an important safety feature,so if these steps fix the light and dinging problem you should still take the steps to have it repaired.
hope this helps.........Good Luck!

Dec 09, 2008 | 1999 Chevrolet Silverado 1500

1 Answer

Trans clunking when slowing down


Sounds like youi may have a few serious problems going on to have that kind of back lash occuring at higher speeds. I have experiance with low spped clunks on Bronkos and your type of vech being a car dealer. One you might try for low speed clunk on take off and braking at stop likts just completeing a stop? Pull the drive shaft and lubricate the splin - two check your leaf springs for weakness and wore bushings - take a look at your shocks - three u bolts holding springs to rear axle housing may be letting the axle housing actually dip or tweak or all those thing in combination - now you may have some serious slop in the pig - transfer case may be causing that clunk - as far as high spped clunk and activity you have a serous problem and you just might drop the transferr case have an accident fliping over..............Mike South Bend Indiana don't just keep driving and making problem worst...........

Jun 23, 2008 | 1996 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5575 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...