Question about Dodge Charger

1 Answer

How to hook up a carter c-2027 to a 318 dodge poly motor. this is a rebuilt autoline,has a c-6023 on the tag. this carb has more vaccum ports than my older model.should i just cap them??

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 4,340 Answers

Well, yes, but you need to have the same port locations, meaning some of the taps do down to the throttle plates, and others go slightly above the idle position of the throttle plates, essentially becoming effective in an "off idle" throttle position....

Off idle ports service distributer, often charcoal fuel canister bleed off, etc.

So, sometimes you have to squirt a shot of carb cleaner (engine off) and observe where in the venturi area the port is drilled to.

Plug the rest, or you have lean conditions on some cylinders, with the leak.

Posted on Aug 19, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I would like to know if you have a carter carburator diagram for a 2bbl carb


Www.carter.com ask for exploded views of your carb you'll need the tag number on the carb. Its relatively easy to do as long as your float level is correct or google carter carberators using the tag number

Feb 06, 2015 | Cars & Trucks

1 Answer

I have a 81 cj5 151..2bbl carb...carb has been rebuilt,new EGR,all new wires and plugs and vaccum advance,new fuel filter ...it idles fine and while accelerating thru the gears it does fine but when u let...


Does it happen if you unplug the EGR ? It could be a vac leak or a problem with the cruise circuit in the carb, even tho it has been rebuilt. You may need to hook up a vac gauge to watch the engine vac.

Jul 02, 2013 | Cars & Trucks

2 Answers

1987 Dodge Omni 2.2 Engine Carborated. Starts great, runs 3 to 5 minutes and then starts to smoke, load up on gas and shut off. Wait an hour and same thing all over again. All tuned up. Any Ideas?


Has the carb been puled off for a rebuild? If not sounds as though the floats may be out of adjustment or malfunctioning. Also a good kit will help it run better. You'll need the numbers on the carburetor to get the kit. There is either a tag or embossed area on where you can find these numbers. Dodge/Chrysler used Carter branded carbs in the past yours may still be one.

Sep 13, 2012 | 1987 Dodge Omni

1 Answer

How do you adjust metring on carb for a carter 1 brl in a 1968 fd falcon futura 200 6cyl


GET A CARB KIT AND REBUILT ITONE BARRELS ARE EASY TO DO ALL INSTRUCTION ARE IN KIT AND IT WILL WORK LIKE ITS NEW ABOUT 30 BUCKS GET A CAN OF CARB CLEANER STICK THE RED TUBE IN THE LITTLE PASSAGES MAKE SURE THERE ALL CLEAN

Oct 19, 2010 | Ford Futura Cars & Trucks

1 Answer

Looking for carter thermo quad linkage diagrams


You can get them in a carb kit for the carb, also Chilton's or Motor books. You may be able to find one at Haynes or Pederson. They print books on carbs as well. If you have a dealer service manual it will have these diagrams too. You can get that at faxonautoliterature.Hope this helps.

Aug 11, 2010 | Dodge Pickup Cars & Trucks

1 Answer

1987 dodge ramcharger is leaking fuel from carburetor, is there a kit to fix the carburetor?


Yes, check at local auto parts store, but they may have to order it, seeing how everything is pretty well fuel injected now. Look for a tag attached, or at least some numbers, make of carb, such as holley or carter, 2 barrel or 4 barrel etc that they can use for reference.

Dec 03, 2009 | 1987 Dodge Ramcharger

1 Answer

Firing order for a big block 440 from a Sports Coach rv Also I need the Parts breakdown for the carb. Thanks


The firing order for that motor is 1-8-4-3-6-5-7-2 The carb is I imagine a carter afb or similar four barrel here is a great link to carter carbs copy this entire link into your address bar
http://www.rodandcustommagazine.com/techarticles/135_0402_four_barrel_carburetors_howto/index.html
I hope this helps you.

Aug 14, 2009 | Chrysler Executive Cars & Trucks

1 Answer

New rebilt carter yfa installed, but idle at 3k all adjustment screws backed out, ? the 2.5 L 4 cylinder came from P O with a jury rigged rochester carb of 77 ford vintage, hard to start so I got the...


The 2.5 L engine is the Pontiac Iron Duke sourced from GM since it was still AMC. They came with Rochester carbs, while Ford used Holley 2 brls on their 4 cyl engines and Chrysler used Carter carbs. You might have the wrong carb and the throttle plates are sticking on the intake manifold. You can try using a carb adapter/spacer. If you drive off road I would suggest buying a TBI throttle body injection system from a junkyard, and pick up a electirc fuel pump. Either new from a speed shop or used from a newer Jeep with a 2.5 L TBI engine, you'll need the computer, harness, relay, sending unit and lines as well. But you can pick up everything at a pick your part yard for cheap (some yards have all you can carry in your hands for $50 days).

Jul 27, 2009 | 1985 Jeep Cherokee

1 Answer

Dont know how to hook up carb


Hello, the best advice I can give for this is to mark your old vacuum lines off the careburator and match them with your new one. A good Chiltons or Haynes Auto Manual can help you in this endeavor as well. Being a mechanic doing upgrades to your vehicle does not always have the manual for the conversion in which you are doing so some good ole guess and tell may be the route to take. Just remember that you need vaccum to take and take out air into the careburator and this is a good start from any careburator upgrade. I have rebuilt and installed probaly 50 careburators and a manual for converting one careburator from one vehicle or motor can take longer than some just good time with your motor figuring out what needs to get done. Thank You

May 20, 2009 | 1981 Ford Bronco

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...