Question about 2007 Dodge Ram 1500 Quad Cab Sport

1 Answer

I acquired a 07 Dodge Ram. The interior auxiliary power ports don't work. I discovered that the fuse is missing. The rest of the fuses are mini fuses bit this one slot has a three pin ( 3 pins in a row ---). I have not been able to locate a 3 pin mini fuse of any amperage much Less a 20 amp is what it calls for. Please help

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 13 Answers

You need to look at your owner manual or or shop manual see what kind and what amp fuse it take replace it with right one ,if is out may be it had some problem they have moved it ,good luck

Posted on Nov 26, 2017

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: My interior light ,Radio is not working the fuses are good

IOD fuse replace it it worked for me i had no radio interior lights or power mirrors

Posted on May 24, 2009

SOURCE: 1992 dodge ram van power windows and ac fan

the reason may be because of the battery is not working properly, please for the battery's power,this may be the reason,, thank you,, plz rate me..

Posted on Jun 28, 2009

  • 2 Answers

SOURCE: 99 dodge ram interior lights wont come on

I had the same problem and could not understand why I THOUGHT I checked all the fuses, but there is a fuse on the drivers side which is covered by a black thing (no idea why). It is listed as IOD or something. If you lift the black thing up and remove the fuse you will notice it is blown. Replace this and all will be well again.

Posted on Oct 11, 2009

ourhowse
  • 2007 Answers

SOURCE: 07 Expedition second row seat head rest cover plate removal

There should either be a little button at the base of the headrest that you push, or a small hole in the rod part, with a hole in it. Push in the hole with a pen, or a small nail to release the headrest.

Posted on Dec 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Auxiliary fan no power 2002 dodge ram 1500 4.7 eng. Relay n fuse are good... do not turn on


If the relay and fuse are ok, there may be a power supply missing at the relay wiring connector ( should be 2 power sources at this connector with key on ). The computer grounds the relay. Have you checked for a bad fan motor? Try running it direct to the battery to verify its operation.

May 26, 2016 | Dodge Cars & Trucks

1 Answer

Missing 4 fuses in recently acquired 1994 dodge van need diagram to find out what they go to


It's not unusual for fuse panels to have open cavities, due to other options that were not installed on your vehicle. Do you have anything that isn't working?

Mar 04, 2010 | 1994 Dodge Ram

2 Answers

2000 dodge ram power door mirrors interior lights and stereo do not work


they're all ran on the same fuse. check for ANY BLOWN FUSES AND REPLACE THEM. they might not say"radio" or "lights". just replace them.

Oct 08, 2009 | 2000 Dodge Ram 1500 Truck

1 Answer

Fan not working on 07 cooper s no power to connector fuse, relays all ok.



Hi,
Please try to get the car in the fan test mode and you need to

1) Turning the key to position 2 (running position)
2) Holding both Auto buttons for >10 seconds
3) Holding the REST button for 5 seconds.

When you scroll to 20 the value is never 10 and is usually either 3.2 or 21.3.

Hold the REST button for 5 sec. Use AUTO to scroll.

10. Blower Control Voltage: 6.0V
11. Emission Sensor: 2.4V
12. Sun Sensor: 4.1V
20. Control Current for Auxiliary Fan: 3.2mA
21. Engine Speed: 44 or 4,400rpm
22. Vehicle Speed: 0 (Car must be moving to show a reading)
23. Terminal 58d: 32 or 32%
24. Battery Voltage: 13.3V


This isn't like the old cars, where the auxiliary fan used a simple switch. The ECT signal comes from the instrument panel.
Perhaps your pushbutton unit is bad.


Thank You for using Fixya.com

Jul 30, 2009 | 2003 Mini Cooper

1 Answer

No auxiliary power, no blown fuses. help, please


my power outlets in my 99vw beetle don't work. i changed the fuse for the cigarette lighter and it still doesn't work. help

Apr 23, 2009 | Chevrolet Malibu Maxx Cars & Trucks

2 Answers

My interior light ,Radio is not working the fuses are good


IOD fuse replace it it worked for me i had no radio interior lights or power mirrors

Mar 07, 2009 | 1998 Dodge Ram 1500 4WD

1 Answer

Interior lights not working


check fuse 12 in the interior fuse block for power...that fuse and the supply feed for that fuse is the only thing the wiring diagram shows the 2 have in common

Nov 13, 2008 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Interior lights not working in 2002 dodge ram diesel


the iod fuse is blown or has no power to it...recheck fuse #12 in the interior fuse panel

Sep 14, 2008 | 2002 Dodge Ram 3500 Truck

Not finding what you are looking for?
2007 Dodge Ram 1500 Quad Cab Sport Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85111 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...