Question about 1996 Chrysler Town & Country
On 1996 Chrysler Truck Town & Country 2WD 3.8L MFI 6cyl the Engine Control Computer is located under hood, driver side, front side of strut tower, mounted on wheelwell.
Hope this help you (remember rated this asnwer).
Posted on Aug 08, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
It's in the fuse box under the hood by the battery. Open the box. It's the one at the front and farthest to the driver's side. Should be a yellow 20 amp fuse. Removing it will kill the radio, navigation and multi disc player.
Posted on Sep 21, 2010
directly behind the mirror on the inside of the door there will be a plastic triangular shaped cover
gently remove the cover using your fingers or something flat like a knife blade
once removed you will see a few holes in the metal of the door, in these holes you will see about 3 bolt heads which hold the mirror to the door, also you will see a multi wire block for the mirror wiring
seperate the wiring block and remove the 3 bolts holding the mirror to the door
don't even think about replacing the glass if that is all that is broken as it is a major drama
just buy a complete mirror assembly and fit to the door unless it is colour coded to the paint on the car in which case you will have to have it painted
re assemble in reverse order to disassembly
hope this helps
Posted on Jul 02, 2010
HAVE SOMEONE EXTRACT THE CODE FROM THE CAR'S COMPUTER. IF THERE IS A CHECK ENGINE LIGHT ON THEN THE PCM HAS A CODE STORED ON IT. IT SOUNDS TO ME LIKE A THROTTLE POSITION SENSOR, BUT JUST CHECK THE CODE TO BE SURE. SOME OF THESE CAN ALSO HAVE A BAD IDLE AIR CONTROL VALVE. I HOPE THIS HELPS YOU TO FIND THE PROBLEM. PLEASE KEEP ME POSTED, THANKS FOR USING FIX-YA. GOOD LUCK
Posted on Aug 28, 2009
SOURCE: need location of crank sensor
You did not mention the engine size you have, but the sensor is mounted on the trans housing and will look like this on a 3.8 liter engine.
Posted on Jul 08, 2010
Tips for a great answer:
Dec 21, 2015 | 1996 Chrysler Town & Country
Jul 06, 2012 | 1996 Chrysler Town & Country
Sep 21, 2010 | 1996 Chrysler Town & Country
Sep 14, 2010 | 1996 Chrysler Town & Country
Jul 29, 2010 | 1996 Chrysler Town & Country
Jul 08, 2010 | 1996 Chrysler Town & Country
Mar 13, 2010 | 1996 Chrysler Town & Country
Nov 12, 2009 | 1994 Chrysler Town & Country
Aug 14, 2008 | 2001 Chrysler Town & Country
Jun 17, 2008 | 1996 Chrysler Town & Country
1,336 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: