Question about 1992 Jeep Wrangler

1 Answer

92 jeep wrangler won't start battery is good and so is the starter. turn key and just get a click at the starter

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

There are a couple things that cause the clicking, you either have a bad starter sylinoid or usually a bad connecton at the battery or starter its self, that click is usually just a bad connection issue

Posted on Aug 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the neutral safety switch located on my 2008 Jeep wrangler?


Sounds like you're starting at the expensive end and working backwards! First, check your battery, make sure it has a good charge. Second step is the starter solenoid. Some designs have external solenoids, some are internal. Third is the starter itself. Once you are sure all that stuff is good, THEN it's time to start looking for the neutral safety switch.

The check engine light is meaningless when the engine is not running.

Nov 07, 2017 | Jeep Cars & Trucks

1 Answer

Why won't my 92 jeep start? Ihave a new battery and starter


maybe earth strap to chassis from engine. put a multi meter from battery neg to engine, set it to DC volts and crank the engine. should read 0 volts if ok. will read about 12 volts if earth is knackered.

Jul 12, 2012 | 1992 Jeep Wrangler

1 Answer

95 jeep wrangler 4.0,won,t start,dash lites won,t go on.replaced starter relay.still won,t turn over.


Try checking the battery and battery leads. Sounds as though you have a bad battery. Also check your fuses under the hood and dash.

Jun 03, 2011 | 1995 Jeep Wrangler

1 Answer

92' jeep wrangler - sometimes i turn the key to start my jeep and it clicks i turn the key off and try again i do this about 5 times and then she turns over doesn't do it all the time though.. i installed...


Sounds like there is a bad conection at the starter
under the left side of the jeep you will see the starter its is by rhe oil pan on top there is 2 wire conections see if it is looose here.
if your going to snug the eire ends up disconect the battery first

Jul 13, 2010 | 2000 Jeep Wrangler

2 Answers

93 wrangler won't start. no clicking when key is


If the battery is brand new then yes, the starter assembly/starter solenoid (located on top of the starter) is bad.

Oct 31, 2009 | 1995 Jeep Wrangler

4 Answers

2006 Jeep Wrangler won't start


First, make sure you can turn the engine by hand. If you can't then the starter can't turn it either. Have someone else turn the key and look for the source of the click...may be a relay. Go over the starting circuit with a volt meter. Check for power at the starter main terminal and then with the key turned to "start" check for power at the trigger terminal on the starter. Check battery voltage and check relay operation.
You have a neutral safety switch on the transmission if its an automatic and a clutch switch if it's a stick. Check them as well. Make sure battery grounding on fender and block are also clean and secure.

Oct 01, 2009 | 2006 Jeep Wrangler

1 Answer

92 jeep wrangler has power but wont turn over to start


The terms "turning over" and starting are often confused... Cranking (turning over) is when the starter turns the engine, regardless of the end result. Starting is when the engine actually runs (even if for a moment).
If your problem is that the engine is turning when the starter is engaged, but not starting, then you have either a fuel or spark fault.
If the engine is not turning, check that the battery has a full charge, and holds adequate power when loaded, that proper voltage is reaching the starter and there is a good engine ground. Power should also be present at the small trigger wire on the starter when ign key is turned to start position.After checking these things you can begin to make a decision on what needs attention and proceed from there.

Feb 28, 2009 | 1992 Jeep Wrangler

Not finding what you are looking for?
1992 Jeep Wrangler Logo

Related Topics:

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

79123 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...