Question about Toyota Sienna

Open Question

2011 Toyota Sienna minivan with >1000 miles had E2 error code come up while driving with dynamic radar cruise control on and then system turned itself off and van suddenly decelerated...??? After rain subsided, cruise worked fine...

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76164 Answers

SOURCE: fuse location for cruise control on a 2000 dodge caravan

The cruise has no dedicated fuse, you will most likely be looking to replace the clockspring rotating contact located under the steering wheel which connects the switches in the steering wheel (horn, cruise and air-bag) to the rest of the electrical system.

Posted on Apr 02, 2009

Ad
  • 1861 Answers

SOURCE: cruise control error codes E1

Change the transmission speed sensor

Posted on Sep 08, 2008

countrysi248
  • 443 Answers

SOURCE: 2000 Toyota Sienna Minivan car alarm goes off.

1. Start with key out of the ignition, drivers door is open all others closed and
drivers door is unlocked.

2. Insert key into ignition (Do not turn) and pull it out.
3. Perform these steps within 40 seconds.
A. Using the power door lock switch on drivers door perform 5 lock/unlock cycles starting
with lock. Use an even pace and try to go about one cycle per second.
(1 cycle = 1 lock and 1 unlock.)
B. Close, then open drivers door.

4. Perform these steps within 40 seconds.
A. Using the power door lock switch on drivers door perform 5 lock/unlock cycles starting
with lock. Use an even pace and try to go about one cycle per second.
(1 cycle = 1 lock and 1 unlock.)
B. Insert the key in the ignition cylinder.
C. Turn the ignition to ON (Do NOT Start) then back to OFF.
D. Turn the ignition to ON (Do NOT Start) then back to OFF.
E. Remove the key from the ignition.

5. Within 3 seconds the power door locks should cycle automatically indicating successful entry
into programming mode. Return to step 1 if the locks do not cycle at this point.

6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remote simultaneously for 1 second.
B. Immediately after letting go of the lock and unlock buttons,
Press the lock button by itself and hold for 2 seconds. Within 3 seconds the door locks
should cycle once indicating successful programming. If the door locks don't cycle or
cycle twice, repeat steps A and B, your remote has not been accepted.
C. Repeat steps A and B in step 6 for each new transmitter.

7. Close drivers door.

Posted on Apr 25, 2009

keithheavili
  • 410 Answers

SOURCE: Trying to locate the idle air control valve on Toyota Sienna Van

You idle air control valve should be located on the throttle body.  Here is a link to a picture of it so you can see what you are looking for:  http://www.autozone.com/autozone/catalog/parts/partsShelf.jsp?categoryDisplayName=Engine+Management&fromType=parts&fromString=search&parentId=cat30067&currentPage=1&filterByKeyWord=IAC&isSearchByPartNumber=false&navValue=15900207&categoryNValue=15999999&fromWhere=&itemId=prod61721&displayName=Idle+Air+Control+Valve&searchText=IAC Let me know if you have any other questions.  Thanks for rating my response and for using FixYa!

Posted on May 28, 2009

bschilz
  • 2049 Answers

SOURCE: I have a 2001 Toyota Sienna with a P1135 code

P1135 (for Toyota) means A/F Sensor Heater Circuit Malfunction Bank 1 Sensor 1 (Set when the heater operates, heater current exceeds 8A or heater current of 0.25A or less).
The A/F sensor contains a ECU-controlled heater. At start-up, the heater helps warm the A/F sensors to quickly operating temperature. With minimal exhaust gas flow, the heater keeps the A/F sensor from cooling down.

Posted on Sep 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cruise control not working on 2011 dodge grand caravan


the following items either individually or together stops the cruise control from working ( you didn't mention auto or manual box)
VSS, ( auto or drive shaft sensor in manual)
brake light switch / sensor/
clutch position sensor ( manual)
fuse
cruise control switch
,fuse
wire to the ignition control module /tacho
cruise control module
ECM

Sep 03, 2013 | 2007 Dodge Caravan SXT Minivan New Cars

1 Answer

What is the drive cycle for a 1999 Toyota Sienna minivan?


You must clear the light and then do the drive cycle.

Jun 14, 2013 | Cars & Trucks

1 Answer

My Toyota Sienna stays at 1000 rpms after completely coming to a stop at a stoplight and will move forward when i take my foot off the brake (on level surfaces). Also drives 15 - 25 miles per hour for 1/2...


If you have a CHECK ENGINE light on it is a bad sensor if there is no light check your floormat?? Sounds crazy but seen it before!!

Good luck hope this puts a stop to your problem!

Oct 23, 2009 | 2006 Toyota Sienna

1 Answer

Dynamic laser cruise control


2005 Avalon only intermittently dedects cars ahead of me.

Mar 23, 2009 | 2007 Toyota Avalon

1 Answer

CEL, flashing cruise control and vehicle dynamics controll OFF lights on Subaru Tribeca


It is safe to drive your car. What happened was you have a Check engine light on indicating a problem with the emission diagnostic system. This also makes your cruise not work, and the light to blink. Take your car to your dealer at your convienence and have them diagnose it.

Nov 04, 2008 | 2007 Subaru B9 Tribeca

1 Answer

Cruise control error codes E1


Change the transmission speed sensor

Aug 08, 2008 | 2006 Toyota Sienna

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...