Re: 1998 Yukon. Headlamps are dull. How do I change them.
If you are talking about the lenses then you don't have to replace them, get some compound and polisher from a parts store, a few minute (hrs) with it and the lenses will look good as new, and a lot cheaper
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Is the fuse good ? fuse # 16 20 amp - right side lo beam .
Free wiring diagrams here http://www.bbbind.com/free-tsb/
Enter vehicle info. year . make , model an engine . Under system click on lighting ,then under subsystem click on headlamps . Click the search button then the second blue link.
It depends, if you have sealed beam headlamps, there should be a frame around headlamp, remove it.
If composite headlamps, there are two hex headed pins in top radiator support, remove those pins. Take out lamp assembly so you can get at bulbs.Don't touch new bulbs with bare hands.
You need to check for power and ground at the headlamps I have ran into situations where you think their is a problem with headlamps when just both bulbs have burned out
more than likely the main headlamps control switch unit is at fault - common failure with this model - replace the complete switch assembly, and all circuits should return to normal.
Check the plug ins. Than check the light bulbs and see if they are melted If that is the case than you have to find the bad wires eather way it has something to do with your wires
It should be pretty easy, thats why there no "directions" Lift up the hood, now at the headlights there should be 2 rods, lift these rods and the lights should lift out, to access the bulbs.
If the headlights do no ilinitate when switched on you have a faulty battery or cable conection problem.Jiggle the cables while the headlamps are switched on if they do not lightr up:battery failure.If they do,clean up the connections at the cable to battery and put the on securely
×