Question about 1999 Ford Explorer

1 Answer

Air works in back but not in front - 1999 Ford Explorer

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 55 Answers

1. Check your air settings to ensure the front air is one
2. Check your hvac fuses.
3. If you can access it, put your hand on the front motor, and have someone turn it on high if you can reach it. If you feel a buzz, the motor is gone.
4. Another way to check this is by unpluging the motor and putting a multi meter on it, and checkin it at 12 volts to ensure you are getting power to the fan.
5. If all checks good, you may have a bad switching device inside the controller, depending on if you want new used or refurbished you can get this for as low as $30 or as high as $300 from ford.
Hope this helps

Posted on Aug 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer fluid on front


Sounds like one of your nozzles is clogged to me. Try this.....Get a spray can of air, like the computer air spray. Stick the long air can nozzle into the spray nozzle. Shoot some air back into the system and see if it frees your clog. When my fluid gets low, mine will get gunk in it and clog to the point of not spraying at all. Compressed air usually does the trick. If not, remove and clean or replace the nozzles.

Feb 02, 2014 | GMC Envoy Cars & Trucks

1 Answer

I have a 2004 Mercury Mountaineer. The heat and air works great in the back half of the car but not in the front. Any ideas?


Get a Chiltons/Haynes manual and see what controls the airflow to front/rear. Could be as simple as a flap control wire fallen off.

Nov 05, 2013 | Cars & Trucks

1 Answer

Air conditioning works in rear, but not in front


Check your blend air door on the frunt ac unit

Jul 12, 2010 | 2003 Dodge Durango

1 Answer

WHIS IS THE FRONT AIR NOT WORKING BACK AIR COLD


front and rear both have relays that cost about$80..im sure you checked the fuses but if not there are some under hood some in panel by passenger door

Jul 04, 2010 | 1999 Oldsmobile Silhouette

1 Answer

My air conditioner in my 2003 KIA Sedona sometimes works


ITS JUST A COMMON PROBLEM A CONTACTED MY SUPPLIER AND HE FIVED AS ITS ALL A FAULT

Jun 01, 2009 | 2003 Kia Sedona

1 Answer

Air conditioning not working. Blowing cool air in the back and hot air in the front.


Is there air blowing from the front vents? or can you hear the vacumm change when you change it from heat to cool..... I think it might be a vacumm problem... its a 1997 so the controller vacumm hoses may be cracking.. let us know

Jun 01, 2009 | 1997 Chevrolet Suburban

1 Answer

Heater not working


the back is usually for air conditioning only i have a 94 and thats the way its made with air control in back heat up front.you might look more closely and see if this isnt the case

Jan 14, 2009 | 1999 Oldsmobile Alero

1 Answer

I have a Nissan Quest 2001. The front air conditioning works the mid section does not, it just blows hot air.


I know this is late and hopefully you have this fixed, but the problem is probably the air diverter door control. There are 2 doors, 1 front, 1 rear (middle) and they are adjusted by a single control to balance the temp front and back based on the controls. If this goes out, you either are stuck with hot air up front/cold air in back or vice versa. You can try manually moving the doors to see if they are stuck (in the duct work) or test the actual control circuit. Check your tech manual for how to do it.

Aug 03, 2008 | 2005 Nissan Maxima

Not finding what you are looking for?
1999 Ford Explorer Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5581 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...