Question about Buick Regal

1 Answer

I'm trying to remove the seatback of the rear seat of a 1991 Buick Regal. How would I go about doing that?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Buick Master
  • 14,036 Answers

LOOK ON BOTH LOWER CORNER OF THE SEAT BACK YOU SHOULD SEE SMALL BOLTS THAT HOLD IT IN PLACE.

Posted on Aug 07, 2010

  • Jonah Oneal Aug 07, 2010

    EITHER REMOVE THE READ SEAT CUSHION RETAINING BOLTS DETACH THE SEAT CUSHION AND REMOVE IT FROM VECHICLE.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i open the trunk from inside a running buick regal 2011?


If that model has a fold down section of the rear seat back, the manufacturer normally installs an accessible manual boot release tab in the vicinity of the fold down seat section just inside the trunk compartment.

If there is no fold down seat in that model or no manual boot release inside the trunk area, the rear seat needs to be removed so that you can access the trunk from inside the car.

Nov 11, 2015 | 2011 Buick Regal CXL

1 Answer

How to remove grand prix window switch cover


Remove the two bolts on the bottom portionof the rear seat cushion.Pull the tabs along the bottom portion of the rear seat cushion until it unhooks from the floorboard mount. Pull the cushion out of the back seat area and set it down. Remove the anchor nuts. Push the seatback toward the rear and up to disengage it from the hangers. Pull the rear seatback out of the Grand Prix, preferably with the help of an assistant. Is there anything else you need?if you need an auto tool you can click here: great tools

Oct 26, 2012 | 2004 Pontiac Grand Prix

1 Answer

Rear seat entry,how do get to truck from the inside?


Sedan: Pull one or both of the unlocking controls in the luggage compartment and fold the rear seatback forward.
Or
3Dr-Hatch: Push the unlocking control on top of the rear seatback and fold the rear seatback forward.

Sep 30, 2010 | 2001 Ford Focus

1 Answer

How do i remove the backseat in my thunderbird?


Rear Bench
(see Figure 4)
  1. Bearing down with your knee on the rear seat cushion, push the cushion rearward and disengage it from the retaining brackets.
  2. Remove the rear seat armrests if applicable.
a32ebe2.jpg

Fig. 4: Pull the bottom of the seat upwards and pull out
  1. Remove the seatback lower retaining screws and seat belt bolts.
  2. Grasp the seatback at the bottom and lift it up to disengage the hanger wire from the retainer brackets.

To install:
  1. Position the seat back assembly so that the hanger wire is fully engaged in the package tray slots.
  2. Install the lower retaining screws and tighten to 13-19 ft. lbs. (17-37 Nm).
  3. Position the seat cushion assembly into the vehicle.
  4. Apply knee pressure to the lower portion of the seat cushion assembly. Push rearwards and down to lock the seat cushion into the seat retainer.
  5. Check the seat cushion to ensure it is secured into the floor retainer.

Rear, Fold-Down Seats
  1. Push the rear cushion rearwards, then lift to release. Remove the cushion.
  2. Remove the 2 lower retaining screws attaching the seat back to the floor.
  3. Lift up and disengage the upper clips of the seatback from the top of the folding floor.
  4. Remove the seat assembly.

To install:
  1. Position the seat back assembly and align the retaining hooks. Ensure hooks fully engage in slots.
  2. Install the two outboard retaining bolts, then tighten to 13-19 ft. lbs. (17-27 Nm).
  3. Lower the seat backs and install the upper retaining screws.
  4. Install the lower center retaining screw, tighten to 13-19 ft. lbs. (17-27 Nm).
  5. Install the rear seat cushion. Ensure the rear seat cushion front retainers latch properly.

Hope helps (remember rated this).

Jul 01, 2010 | 1994 Ford Thunderbird

1 Answer

How do I remove the backseat of my 91 regal in order to install after market speakers?


Most rear seats you must remove seat section first .Grab front edge of seat & pull up. Then bolts for back of seat should be at the bottom at what would be the floor.Top should be on what I would call hooks , so the back must be slid upwands after bolts are out.Hope I'm not leading you in the wrong direction and you have bolts holding front of seat down! Check along front edge to ensure this is not the case

Jun 14, 2010 | 1991 Buick Regal

1 Answer

I need to remove the rear seats to get into the trunk


you pull up on each side of lower seat, it will pop up on each side.after removing that you will need to unbolt the backs at the bottom of seatbacks and then you need to push up to unhook the top of seatback and that should do it.

May 26, 2009 | 2003 Lexus Gs 430

1 Answer

1999 BUICK REGAL LS 4 dr-Left rear shoulder belt stuck


You pop the bottom seat cushion first, some models depending on the trim level used a bolt on each side. Lift up the cushion and you will probably see everything you need to remove the belt, If you still need to remove it, there are 4 blots at the bottm of the backrest of the seat.

Jan 16, 2009 | 1999 Buick Regal

1 Answer

Seating rear brake piston on 96 Buick Regal


check local auto parts store for special tool, does not cost much and easier to use than pliers

Nov 17, 2008 | 1996 Buick Regal Olympic Gold

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...