Question about 2004 Nissan Titan

1 Answer

No right turn signal on towing receptical.It use to work,i have left turn and park lights. Did i blow a fuse somewhere?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 2,002 Answers

If the right turn signal works on the truck then you didn't blow a fuse. Try spreading the prongs inside the receptical to see if that makes the signal work. If it works then you will have to replace it in the near future. If that doesn't work the replace the wire that runs from the receptical to the truck. Hope this helps.

Posted on Aug 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 Park Avenue my turn signals do not work my flashers work


gmlogoflat.gifService Information
2002 Buick Park Avenue ' Park Avenue (VIN C) Service Manual ' Body and Accessories ' Lighting Systems ' Description and Operation ' Document ID: 643323


Turn Signal/Cornering Lamps
The HZDT/SIG fuse in the fuse block - underhood - left supplies battery positive voltage to the turn signal/hazard flasher module and have ground at G202. The turn signal lamps may only be activated with the ignition switch in the ON or ACCY position. The T/SIG fuse in the fuse block - underhood - left supplies battery positive voltage to the turn signal switch. When the turn signal switch is placed in either the left or right position, current flow is from the turn signal switch assembly to the turn signal/hazard flasher module. The turn signal/hazard flasher module then sends an on-off voltage signal to either the left or right turn signals and their instrument cluster (IPC) indicator. When the hazard switch is pressed, all the turn signal lamps will flash including both IPC turn signal indicators. The left turn signals have ground at G106, G400 and at G402. The right turn signals have ground at G105 and G400. The turn signal switch supplies battery positive voltage to the cornering lamps, the left cornering lamp has ground at G105 and the right cornering lamp has ground at G106.
+snpvvsvwho06+5aqhepgaaaabjru5erkjggg==










2002 Buick Park Avenue ' Park Avenue (VIN C) Service Manual ' Body and Accessories ' Lighting Systems ' Description and Operation ' Document ID: 643323

May 10, 2016 | Cars & Trucks

1 Answer

My fuse keeps blowinng when i turn on my lights but the headlights ,blake lights and turn signals work but no tail or parking lights


If the fuse blows, you have a dead short to ground somewhere, likely around the tail lights or parking lights. Try this:

Get a box of the correct fuses.
Remove all tail and parking bulbs and put in a new fuse. If the fuse does not blow, try installing each bulb at a time to see which light assembly causes the fuse to blow.
Let's suppose its the RH tail light assembly. Pull it off the car and check for dirt and damaged wiring.

If this is an older vehicle, there may be wiring damage (due to rust) in the harness under the carpets.

Mar 01, 2014 | Ford Explorer Sport Trac Cars & Trucks

1 Answer

I have a 2000 Dodge Durango and I keep blowing the fuse for instrument lights and tailights


hello same pronlem with my 98 durango but right turn signal!

what it was is the 4 pin connector for the tow package had the insulationripped off them i guess whe backing out of a steep driveway it sxrapped! so the headlights, turn signals, and brake circuits where grounding out! quick fix!

just cut and capped that mess!

good luck

Mar 02, 2013 | 2000 Dodge Durango

1 Answer

2005 suburban , the trailer harness wiring behind the plug in has power for the break and right turn but has no power for riding lights or left turn ?


Find the LEFT INSTRUMENT PANEL FUSE BLOCK. At the TURN SIGNAL/FLASHER MODULE, a 10A fuse (A9?) protects the right trailer stop/turn circuit (DK GRN) which you say is OK. Back at the S/FM, a 10A fuse (A8?) protects the LEFT trailer stop/turn circuit (YEL). At the UNDER HOOD FUSE BLOCK, a 15A TRL PARK fuse (B6?) protects the running/parking lights (BRN).

Sep 04, 2012 | 2005 Chevrolet Suburban

2 Answers

In the park position, the turn signal works, but w...


There has to be a short or a crossed wire in there somewhere.

You handy with a multimeter?

Check voltages/shorts at the fuse box when the turn signal is on and off while having someone switch the car from park to drive. i'm guessing it's caused by a short or something in common with putting the brake on (because putting the car in drive requires you to apply the brakes first, causing the brake lights to come on, possibly overloading the fuse for the turn signal)

Also check the inside of the area where the signal bulbs are, could be crossed with the brake or shorted in there somewhere.

The bulbs also might have something in common internally, replace the bulbs if you haven't already. I think those bulbs can come on from a signal from the brake pedal (brake lights), but can also be activated by the turn signal.

Good luck with that, let me know how it turns out or if there are any developments

May 19, 2010 | 1987 Pontiac Fiero

1 Answer

F450 Right Blinker blinking fast - Bulbs are fine


could be a short,but more than likely the bulb receptical has a worn contact so the receptical needs replaced.

Apr 29, 2010 | 1999 Ford Super Duty F 450

1 Answer

The left turn signal stopped working, then the right. Now the blower and the abs light is on. I changed the turn signal switch/hazzerd/wipers. And the 10 amp fuse keeps blowing. Marked turn/bu/abs


20amp turn on four ways and parking lights go around replace any bad bulbs turn of for ways tern key on tern right tern on go around se if blinking tern on left and se if not chang flash thears 2 flashers switch the tow to se witch is bade.chek fuse for the right amp look inside fuse cover for right amp

Jan 26, 2010 | 2000 Dodge Caravan

2 Answers

2001 Explorer Sport ,Rear Driver Brake Light and Turn Sig. Broke


Rear lights are double filament bulbs one side for the lights other side for the brake/turn signals so it still may be a bulb. Do u have a test light or volt meter you can check to make sure u have power there when brakes or turn signals are activated. Or just try another bulb.

Feb 12, 2009 | 2001 Ford Explorer Sport

1 Answer

No brake lights blows fuse every time


there is most likely a short in the wires have you put a tow package on it if so did you splice in to the lines check all wires and see if they are burnt any were most likely short

Jan 05, 2009 | 1995 GMC Jimmy

Not finding what you are looking for?
2004 Nissan Titan Logo

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...