Question about 2000 Nissan Maxima

2 Answers

I changed the spark plugs and started the car,the battery needed to be cleaned so i did that when i tried to start the car again it wouldn't turn over when i tried again i got nothing my question is if there is something that has to be re-set after the battery cable has been removed?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If can not start due to alarm lock you can try to off set by close the door then use your key to open it also use this key to open the truck then the alarm should be off and start your car.If not work then looking for other reason;such as wrong connection to spark plugs.

Posted on Aug 12, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,702 Answers

Yes the car alarm its still set to "on" so its killing the starter,,
it stops the getting nicked???

Posted on Aug 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Won't start


What engine do you have?

May 20, 2013 | 1989 Ford Bronco

1 Answer

Suzuki wagon r+gl check engine light keeps flashing and wont start after battery change


the engine (there are more than one engine)
has a distributor.
"have spark at coil down to dizzy but no spark at plugs"
this can mean only 2 things.
1: spark wires are dead. all 4, kinda hard to believe huh?
2: the dizzy is way off time. so time the dizzy and now spark
lands on each wire term.
if not a dizzy engine, post exact version of engine and country.

Apr 14, 2013 | Suzuki SX4 Cars & Trucks

1 Answer

Car wouldn't start, now idles rough at start up.


Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.


Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This will help.

Thanks.

Feb 21, 2012 | 1994 Toyota Corolla

1 Answer

2001 maxima wont start after changing crank and cam sensors


Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.


Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This will help.

Thanks.

Feb 17, 2012 | 2001 Nissan Maxima

1 Answer

I have a 2001 dodge durango slt I started it and there was a grinding noise drove it to the store and put in a bottle of transmision fluid in and the noise was still there . Tryed to stop at a light and...


Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.


Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This will help.
Thanks.

Feb 08, 2012 | 2001 Dodge Durango

1 Answer

My mountaineer won't start. It sat for a little over a year because of transmission issues. When I finally got a trans for it, it wouldn't start. I replaced all spark plugs and replaced the...


If the engine is turning, but slow, she may need the battery terminals cleaned, if it has sat for over a year, yes, it may need a new battery. If the engine is turning over and she is not cranking up. Standard rules apply... does she have fuel? does she have spark, does she have compression? First thing is easy, get a can of starting fluid and give her a spray in the air filter area during cranking, if she pops off you have spark, which means no fuel. If it does not try to hit, that means no spark and more trouble shooting will need to be done. If it starts on starting fluid, you may have a bad fuel pump. AS gas turns to gunk as it dries up. And that may have gummed up the pump and filter. Hope this helps FixYa up.

Sep 12, 2011 | 2003 Mercury Mountaineer

2 Answers

Replaced spark plugs and still having issues


Well tell way your describing the symptoms I'd say it is related to your battery and or starter. If I misunderstood and the vehicle turns over fine, just takes repeated try's to get it to start then I would then suggest to look at the ignition switch. The electrical connections may be worn out.

May 03, 2009 | 1997 Honda Prelude

1 Answer

Car would not start or the engine wouldn?t even turn over.


Try removing spark plugs and turning engine over by hand with socket wrench on harmonic dampner if it spins freely probably not engine problem fluid in cylinders will cause hydro lock indicating blown head gasket or injector stuck wide open. a broken timing belt would still allow engine to turn over as your car should not have an interference engine. If engine will not turn by hand with spark plugs out susspect internal engine damage siezed bearings broken rod and so.

Oct 16, 2008 | 1992 Honda Accord

Not finding what you are looking for?
2000 Nissan Maxima Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...