Question about 1996 Chevrolet Tahoe

1 Answer

Clunkinng up in the front end when i go over bumps

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 55 Answers

Worn out suspension bushings, bad shocks, loose skid plates, hitting travel stops, its could be a number of things. kinda hard to narrow down when your just talking about a sound that is being generated from one end of the vehicle. simplest this is to just drive it up on a set of front and rear ramps (you can get these at walmart), take a rubber hammer, and gently tap around on things that you know should be tight, id start with the skid plate if it has one, the bushings in those dry rot all at the time. hope this helps

Posted on Aug 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dodge van 3500


check steering ball joints for wear. Check for loose wheel bearings. Check front end suspension

Aug 15, 2014 | Cars & Trucks

1 Answer

2005 stratus squeaks in front end over bumps and car shakes when slowing from speeds of 35mph and over


The noise would usually be the strut or the control arm bushings. The vibration could also be the component making the noise, or warped brake rotors.

Feb 25, 2014 | Dodge Stratus Cars & Trucks

1 Answer

2007 Rav4 Limited--new tires, new brakes/front rotors turned, new struts in front--still some vibrations and light bumps in front suspension that have me flummoxed. Also occasional light bump in steering...


vibrations could be from failing cv joints and worn bushes in the drive shaft ends of the transmission. The bumps in the steering could be coming from worn bushes at the end of the rack and worn Ball joint ends of the steering

Sep 28, 2013 | Toyota RAV4 Cars & Trucks

1 Answer

Clicking noise in front end of car when going over bumps


Probably the front struts your sway bar links can cause the same noise if they are failing but you should have heard or felt somthing while turning regardless of bumps if the sway bar links were bad. Like the other people said start with the struts.

May 28, 2012 | Cars & Trucks

1 Answer

If i hit a small bump at 50 mph, front ends shakes so bad,I have to stop truck \r\nalso lots of play in steering


My friend, you have very serious wear in the front end of your vehicle as evidenced by the severe vibration when you hit a bump. The front end steering equipment in your Jeep is very complex requiring special tools and expertise to properly repair. Please get your 1995 Jeep looked at soon by a front end alignment specialty shop in your area. This is a very dangerous condition.

Thank you for your interest in FixYa.com

Oct 03, 2010 | 1995 Jeep Grand Cherokee

1 Answer

Left front end noise over bumps on 2004 9-3 arc vert.


sounds like a bad shock or broken sawey bar

Nov 16, 2009 | 2004 Saab 9-3

1 Answer

Has a clunk in front end when i go over speed bumps or any bumps in general


It sounds like you have worn struts in the front,you can check the top nut on the struts it could be loose,but most likely you will need to replace both front struts and when that is done make sure to get a front end alignment also.

Aug 30, 2009 | 2001 Hyundai Santa Fe

1 Answer

The front end and steering wheel shakes when i hit a hole or bump


This usually indicates a problem with the suspension components. Check for play in front end suspension, 1st thing I would check would be the steering damper, it's often overlooked, and could be the cause. If that checks out ok, jack up and check for play in wheels, which could be caused by worn ball joints, tie rod ends, wheel bearings. A lot of possibilities, generally play in any components can trigger the shaking you're experiencing when hitting a pot hole or bump. Good luck!

May 09, 2009 | 1988 Ford F 150

2 Answers

Clunk noise from front left suspension


My guess is a strut bushing/bearing, but have your front end checked out by good shop to make sure it isn't something else more dangerous.

Sep 09, 2008 | 2005 Pontiac Grand Am

Not finding what you are looking for?
1996 Chevrolet Tahoe Logo

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...